|
| 1 | NOTES :- 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 50% of materials with him till the completion of item/date.2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay.3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station.4. If any painting works, contractor need to clean the area and remove the drop marks from floor, doors, windows, sills, inbuilt furniture items etc. otherwise a recovery of Rs 10.00 per sqm in internal paintings and Rs 5.00 per sqm for external paintings will be made from contractor. |
| 2 | Taking down the existing steel window shutter for carrying out repair i.e. replacement of unserviceable steel hinges (02 Nos of hinges box type one shutter) and refixed in same position complete including loosening/tightening of hinges and greasing the top and bottom hinges completely and ensure smooth function including making good the damaged surface to match with the adjoing surface complete all as specified and as directed. |
| 3 | Taking down Mild Steel Ventilators / windows not exc 1 sqm each complete all as directed |
| 4 | Taking down Mild Steel Windows of exc 1 sqm and n.exc 2 sqm each complete all as directed |
| 5 | S&F Mild Steel Ventilators with top hung shutter including hinges,steel peg stay complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | S&F Mild Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, any type, dovetailed or welded complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | S&F 25 mm dia powder coated MS curtain rod along with fixing curtain bracket supports/stops and curtain knobs/end caps fancy type including taking down old pipe complete all as specified and as directed. |
| 8 | S&F 25mm Stainless Steel fancy type curtain rod along with fixing curtain bracket supports/stops and curtain knobs/end caps fancy type including taking down old pipe complete all as specified and as directed. |
| 9 | S&F in repairs 25mm fancy type SS curtain end caps/ Knobs complete all as specified and directed. |
| 10 | S&F Venetian Blinds roller type of any colour with three adjustment type (See through, Half shade, and Full shade) complete all as specified and directed. Make : Mac or equivalent. |
| 11 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards, slabs, blankets, any thickness, including cover fillets. |
| 12 | S&F GI powder coated snap grid frame work of size 600X600mm having Main Tee of 24X32mm, Cross Tee 24X26mm and L angle of 24X24mm for false ceiling along with Hangers 2 mm dia GI (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 13 | M&L 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 14 | M&L False ceiling of 8mm thick gypsum ceiling tiles with front PVC laminated & back Aluminium foil, Ceiling board of dimension 595X595mm with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre grid (Frame work of ceiling shall be measured and paid separately).Make:Diamond or Equivalent. |
| 15 | Taking down chowkats or frames not exc 1.5 Sqm each with shutters without taking off shutters from the frames complete all as specified and directed. |
| 16 | Taking down chowkats or frames all as above item 14 but exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed. |
| 17 | Taking down shutters of any description not exc 1 sqm each complete all as specified and directed. |
| 18 | Taking down shutters all as per item No. 15 above but exc 1.0 Sqm and not exc 2 sqm each complete all as specified and directed |
| 19 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door/ Skeleton shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter S.S screws, all as per direction of Engineer-In-Charge. |
| 21 | Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and directed |
| 22 | Supply and fix 30 mm thick factory made PVC rigid frame panel door shutter made from MS tubular frame of gauge 19 x 19 mm style and 15 mm x 15 mm top and bottom rails MS frame to be covered with 5 mm thick heat moulded PVC 'C' channel of size 50mm x 30mm for stiles with 5mm thick PVC sheet (50 mm wide for top rail, 75 mm wide for lock rail and bottom rail on either side). Paneling of 5 mm thick PVC sheet to be fitted in the MS frame, sealed to the styles and rails with 25 mm thick PVC sheet beading on either side and joined together with cement solvent adhesive complete all as specified and directed |
| 23 | Supply and fix 30 mm thick Factory Made Solid PVC Moulded Door Shutter,with particle board core, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing |
| 24 | S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for WPC/PVC door frame along with strong adhesives to Brass screws for fixing complete all as specified and directed by the Engineer-in-Charge |
| 25 | S&F 150 mm size Aluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and directed |
| 26 | Material and labour for Second class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 27 | S&F Factory made 35 mm thick second class hard wood plain framed paneled shutters (two panels) with lock rail and panels of 9 mm BWP commercial ply or 12 mm veneered particle board for others with commericial veneering on both faces and size of members of door shutters as per IS :1003(part I ) as specified in SSR part I section 3 clause 8.20 (a) fitted to chowkats, kiln seasoned and chemically pressure treated complete all as directed. |
| 28 | S&F 35 mm thick flush shutters solid core construction with block board and plywood face panels commercial type on both sides complete all as specified and directed. |
| 29 | S&F Factory made kiln seasoned chemically treated 35 mm thick second class hard wood glazed and skeleton door shutters, open rebated and prepared to receive glass/gauge etc., without sash bars but divided into two panels, with bottom panel fitted 9 mm B.W.P. comercial ply or 12 mm venered particle board with commercial veneering, (half panel board & half wire mesh) wood additional stiles/rails edges of framing plain, chamfered or rounded fitted with miterd beads for receiving glass, gauge etc,size of members of door shutters as specified in SSR part I section 3 Clause 8.20(a) fitted to chowkats complete all as directed. Note- wire cloth will be measured and paid separtely. |
| 30 | All as per Item No 28 above but 30 mm thick window shutters (factory made) complete all as specified and directed. |
| 31 | All as per Item No 28 above but 30 mm thick window shutters with sash bars (factory made) complete all as specified and directed. |
| 32 | S&F mild steel work as in hold fasts including sanding and tarring complete all as specified and directed |
| 33 | S&F Aluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all specified and as directed |
| 34 | S&F 100 mm size medium weight cold rolled mild steel butt hinges complete all as specified and directed |
| 35 | S&F 150 mm size extruded aluminium door handles fabricated type complete all specified and as directed |
| 36 | S&F 200 mm size Aluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and directed |
| 37 | S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed. |
| 38 | S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all specified and as directed. |
| 39 | S&F 2nd class hard wood small fittings sugh as brackets of any type, lath and hinge blocks, shaped door and window stops and the likes, iincluding all necessary labours article n. exc 200 cu cm each complete all as specified and directed. |
| 40 | S&F 100 mm size extruded aluminium door handles fabricated type complete all specified and as directed |
| 41 | S&F 75 mm size medium weight cold rolled mild steel butt hinges complete all as specified and directed |
| 42 | M&L for Preparing and applying two coats of synthetic enamel paint over a coat of pink primer on small articles such as brackets not exc 30 cm projection complete all as specified and as directed by the Engineer-in-Charge. |
| 43 | S&F MS framed work as in grill/ gratings and doors of angle (or) other sections with gusset plate rails braces etc complete drilled for fixing of steel sheeting (or) other covering to doors etc to be prepared for hanging (or) sliding with and including either hooks and pintel hinges (or) steel hanging door etc. including covering sheet complete all as specified and directed by Engineer-in-charge. |
| 44 | Taking down, Resecuring or easing and refixing shutters of any description exc 1 sqm and n exc 2 Sqm with new builders hardware articles wherever necessary each complete all as specified and directed by Engineer-in-charge. |
| 45 | M&L for Preparing new steel and iron surfaces of any description over 10 cm widthor girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as directed by the Engineer-in-Charge. |
| 46 | M&L for Preparing new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed by the Engineer-in-Charge. |
| 47 | M&L welding in repairs n. exc 2.50 cm in length, thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as specified and as directed. |
| 48 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. all as specified and directed. |
| 49 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2nos in each door, hinges, anodised aluminium snap beading screws etc.all as specified and directed. |
| 50 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1No) hinges type B-21 100mm long (2No) suitable handle (1No) complete all as specified. |
| 51 | Supply and fix Powder coated Aluminium (minimum thickness of powder coating 50 micron) window shutters, sliding type two track for fixing glass sections of aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws, anodised aluminium fittings such as handles and locking arrangement complete all as specified and as directed. Note : Glass will be measured and paid separately under relevant item.complete all as specified and as directed. |
| 52 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension f uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: Gaps should be filled with silicon sealent. For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 53 | S&F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: Gaps should be filled with silicon sealent, For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 54 | S&F 4mm thick plain sheet glass nexc 0.5 Sqm each with glazing any size with rubber packing where ever required complete all as specified. |
| 55 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 56 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge. |
| 57 | S&F Anodised aluminium grill (deco grill) any size 10 mm thick complete with frame or channel section including all necessary fittings complete all as specified. |
| 58 | Taking down and refixing aluminum anodized door shutters with or without frames and repairs of rubber bedding including jointing cleats, easing, greasing and necessary fitting & all accessories complete all as directed by Engineer-in-charge. |
| 59 | Taking down and refixing aluminum anodized window shutters with or without frames and repairs of rubber bedding including jointing cleats, easing, greasing and necessary fitting & all accessories complete all directed by Engineer-in-charge. |
| 60 | S&F 18/19mm Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work complete all as specified and directed. |
| 61 | M&L 1mm thick Laminate sheet (sunmica sheet) glossy finish any colour paste with favicol on plywood/ Block board for cabinet and cupbord, commercial type on one sides complete all as specified and directed |
| 62 | S&F in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as directed. |
| 63 | S&F in repairs 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminated & other side balancing, white lamination, fixed with screws to timber frame work. complete all as specified and as directed. |
| 64 | Extra over rates of 18/19mm thick block board, prelaminated or veneered particle board for external teak wood lipping, 6 mm thick, fixed with nails complete all as specified and as directed. |
| 65 | M&L Soft closer drawer channel of any length as per requirement complete as directed. Make : Godrej |
| 66 | M&L Stainless steel Basket any type / any size fixing complete as directed by Engr-in-charge. |
| 67 | S&F Stainless steel Handle 100mm dia as per requirement complete all as specified and directed. |
| 68 | S&F Clip on soft hinges full overlay complete as directed.Make : Godrej |
| 69 | S&F in repairs Clip on soft hinges full overlay complete as directed.Make : Godrej |
| 70 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 40 mm complete all as specified and as directed. |
| 71 | S&F in repairs continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 40 mm complete all as specified and as directed. |
| 72 | S&F 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed. |
| 73 | S&F in repairs 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed. |
| 74 | S&F brass magnet for cupboard complete all as specified and as directed. |
| 75 | S&F 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed. |
| 76 | S&F in repairs 35-40mm dia Brass knobs fixed with screws complete all as specified and as directed. |
| 77 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 78 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame all as specified and directed. |
| 79 | S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall, gates etc complete all as specified and directed. |
| 80 | S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge. |
| 81 | Hacking out old broken glass from wooden frame/metal frame or stone concrete or brick with putty or fixed with nail complete all as directed by the Engineer-in-Charge. |
| 82 | S&F sheet glass, ordinary quality, 3 mm thick, in squares in each pane and glazing with oil putty complete all as specified and as directed by the Engineer-in-Charge. |
| 83 | S&F figured glass, pin head type, 3mm thick and glazing with oil putty in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed by the Engineer-in-Charge. |
| 84 | S&F 12mm Toughned glass door as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required complete all as specified and directed. |
| 85 | S&F in repairs 19mm thick DGU (Double Glazed Unit) glass for UPVC window/doors including drying agent and sealents complete all as specified and directed |
| 86 | S&F in repairs 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed. |
| 87 | S&F in repairs 150 mm size Aluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed |
| 88 | S&F in repairs alluminium alloy, anodized sliding door bolts 250 mm long with hasp and staple (bolt type) with fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy, ISI marked and fixed complete all as specified and as directed |
| 89 | S&F in repairs 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as directed. |
| 90 | S&F in repairs 100 mm size medium weight cold rolled mild steel butt hinges complete all as specified and directed |
| 91 | S&F in repairs mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all specified and as directed. |
| 92 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed. |
| 93 | S&F in repairs aluminium dia cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed all as specified and directed. |
| 94 | S&F mild steel Mortise lock vertical type 100mm size, not less than 4 levers complete all as specified. |
| 95 | S&F in repair stainless steel door handle with lock set, 6 levers complete all as specified.(Make Grdrej cat pat No. ELC05 or equivalent make) |
| 96 | S&F Self adhesive silicone door seal of seal width not less than 50mm, thickness not less than 2mm complete all as specified and directed. |
| 97 | S&F 650 x 450 mm bevelled edge mirror of selected quality glass mounted on PVC frame and fixed to wooden plugs with chromium plated brass screws and cup washers in repairs complete all as directed by the Engr-in-Charge. Please Enable Macros to View BoQ information |
