|
| 1 | Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc.completed all as directed |
| 2 | M&L for rendering 15 mm thick in cement Mortar (1:4) on the surfaces fair faces of brick work/concrete and finished the surface even and smmoth complete as specified and directed |
| 3 | M&L for rendering 15 mm thick in cement Mortar (1:6) on the surfaces other than fair faces of brick work/concrete/ and finished the surface surface even and smmoth complete as specified and directed |
| 4 | M&L for rendering 10 mm thick in cement Mortar (1:3) on the surfaces of ceiliing and finished the surface even and smmoth complete as specified and directed |
| 5 | M&L for 10 mm thick cement plaster in cement mortar 1:3 including concrete work for RCC chajja, fins, facia ceiling of chajja and like not exceeding 60 cm wide including necessary formwork, scoffolding, finished even & smooth without using extra cement complete all as specified and directed. |
| 6 | Complete removal of existing treatment on wall surfaces complete all as specified. |
| 7 | M&L for preparation of newly / old plastered surfaces of wall and applying a coat of wall care putty 1 mm thick to make the surfaces truly smooth complete all as specified. |
| 8 | M&L for applying two coats of distemper oil emulsion over a coat of primer white or tinted on newplastered/ putty wall surfaces (or necessary preparation if required ) complete all as specified and directed. |
| 9 | M&L for preparing the old surfaces and applying one coat of oil bound distemper white or tinted on walls and complete all as specified and as directed by Engr-in-Charge at site. |
| 10 | M&L for preparing the old surfaces and applying one coat of oil bound distemper white or tinted on ceiling and complete all as specified and as directed by Engr-in-Charge at site. |
| 11 | M&L for preparing the old surfaces and applying one coat of oil bound distemper white or tinted on walls/ceiling by mechanical applicator and complete all as specified and as directed by Engr-in-Charge at site. |
| 12 | M&L for complete removal of existig treatment of any height of bldigs and applying two coat of distemper oil emulsion white or tinted etc by mechenical applicator or as directed by Engr-in-Charge at site. |
| 13 | Complete removal of existing treatment of walls/ ceiling and applying two coats of distemper oil emulsion over all as directed by Engr-in charge. |
| 14 | M&L for preparation of old surface by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and also to remove all loose scale of lime/colour wash, including removing nails making good holes, cracks patches only and applying one coat of white wash (lime) on walls including cornices plastered or un-plastered old decorated surface complete all as specified and directed by Engineer-in-charge. |
| 15 | All as specified in item No-14 above but applying one coat of white wash on ceiling. |
| 16 | All as specified in item No-14 but applying two coat of white wash on wall including cornices etc complete all as specified and directed by Engr-in-Charge. |
| 17 | All as specified in item No-14 but applying two coat of white wash on ceiling including cornices etc complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primar complete all as specified and directed. |
| 19 | M&L for preparation of old decorated surface of walls rubbing,watering etc and applying one coat of cement base paint complete all as specified and directed. |
| 20 | M&L for preparation of old plastered surface of wall and applying two coats of cement base paint complete all as specified and directed. |
| 21 | complete removal of existing treatment and applying two coats of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care putty on ceiling complete all as specified and directed |
| 22 | complete removal of existing treatment and applying two coats of exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja surfaces complete all as specified directed. |
| 23 | M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth |
| 24 | M&L one coat of synthetic enamel paints on old steel surfaces over 10cm width or girth after necessary preperation of old surfaces. |
| 25 | M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a primary coat of pink primer over 10cm width or girth |
| 26 | M&L for preparation of old painted surface of wood over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed. |
| 27 | Demolition of brick work built in cement mortar or lime mortar complete of any description all as specified and directed. |
| 28 | M&L for brick work with subclass ‘B’ bricks modular type, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 29 | Dismantling floor, hearth or wall liling including cement mortar beding layer all as spd and directed by Engr-in charge. |
| 30 | Roughening old surfaces by picking, sweeping clean and washing down with water remove dust complete all as specified and directed. |
| 31 | M&L for coloured glazed ceramic tiles in vertical surface 300x 450x 7 mm (any suitable size available in market) over 10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed |
| 32 | M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in floor etc, with and including over 15 mm thick screed bed in CM(1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed. |
| 33 | M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in skirting/dado etc, with and including over 10 mm thick plaster in CM(1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed. |
| 34 | M&L vitrified ceramic tiles light shade 10 mm thick (square / rectangular ) polish, area of each tiles not exceeding 0.36 Sqm in size as in floor etc set and jointed, joint free and pointed in white or coloured cement to match incl 20 mm thick screed bed in CM 1:6 on concrete surface rough finish to recive tiles all as specified and directed. |
| 35 | M&L vitrified ceramic tiles light shade 10 mm thick (square / rectangular ) polish, area of each tiles not exceeding 0.36 Sqm in size as in dado / skirting etc set and jointed, joint free and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:4 finished rough to recive tiles all as specified and directed. |
| 36 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded. |
| 37 | M&L Machine cut black Granite stone slab 20 mm thick (as in cooking platform) over 15mm thick (1:6) cement screed base laid and jointed with grey ement slurry mixed with pigment to match the shade of slab including rounding of edges,grinding and polishing complete all as specified and as directed by Engr-in-Charge. |
| 38 | Rounding to edges of stone slabs on edge such as in steps cooking platform and other similar situations complete all as specified and as directed by Engr-in-Charge. |
| 39 | Demolition of cement concrete (un reinforced) of any description incl. floor tile and in any position not otherwise specifically provided for |
| 40 | M&L for water proofing treatment to sunken surface of floor slab/skirting/ dome in following sequence:- |
| 41 | Laying plain cement concrete padding 1:2:4 Type B0 (using 12.50mm graded stone aggregate) with integral water proofing compound \\" Pidicrete URP manufactured by M/s Dr. Fixit or equivalent as per manufacturer instructions\\" ( note- integral water proofing compound shall be measured in supply only ). |
| 42 | floor / vertacal skirting side plaster in CM 1:3, 15mm thick with and including using \\" Pidicrete URP\\" manufactured by Dr Fixit as per manufacturer instruction and 72 Hrs tesing for water tightness by ponding of water. |
| 43 | Applications of two coats of proof coat black manufactured by Dr Fixit or equivalent as per manufacturers instructions all over and testing again for water tightness by ponding of water for 72 Hrs. |
| 44 | M&L for cement concrete 1:5:10 Type E2 (40mm graded stone aggregate) as in mass concrete. |
| 45 | Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge. |
| 46 | Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) n exc 1.50 Sqm each complete all as specified and directed. |
| 47 | Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) Exc 1.50 Sqm but n exc 4 Sqm Sqm each complete all as specified and directed. |
| 48 | Taking down shutters area n exc 1.0 Sqm each complete as specified and directed. |
| 49 | Taking down shutters area exc 1.0 Sqm but n.exc 2.0 sqm each complete as specified and directed. |
| 50 | Taking down of shutters area exc 1.0 Sqm but n.exc 2.0 sqm each and refixing in same opening shutters including cutting to size and fitting complete as specified and directed. |
| 51 | M&L for pressed steel frames for doors (105X60MM) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 52 | M&L for pressed steel frames for doors (125X60MM) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 53 | M&L for cement concrete type C-0,1:3:6 (12.50 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as specified and directed. |
| 54 | M&L 2nd class hardwood plain, solid, straight chowkhats and frame, wrought, framed rebated on solid, rounded or chamfered, put together with glue pinned at joints supply & fixed. |
| 55 | S&F flush shutter (35mm thick), factory made solid core construction, with block board core and plywood face panels, commercial type on both sides and fitted to chowkats complete all as specified and directed. complete all as specified and directed. |
| 56 | S&F factory made 35 mm thick glazed and Skelton door shutter 2nd class HW (rail and style ) open rebated and prepared to receive glass / Gauged divided in to squares with plain chamfered or rounded mitred and rebated fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part – I section-8, clause 8.24(a) and fixed to Chowkhats, complete all as specified and directed. |
| 57 | S&F factory made 30 mm thick glazed and Skelton windows and ventilator shutter 2nd class HW open rebated and prepared to receive glass / Gauged divided in to squares with plain chamfered or rounded mitred and rebated with sash bars (any numbers) fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part – I section-8, clause 8.24(b) and fixed to Chowkhats, complete all as specified and directed. |
| 58 | S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified. |
| 59 | S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 60 | S&F powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/M including 4mm thick glass/ss wire mesh necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc., complete all as specified and as directed |
| 61 | S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces :-(a) Window frame of cross section 101mmx40mmx1.5mm thick.(b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick. (c) Sliding shutter frame of cross section 40x18x1mm.(d) Aluminium glazing stip of size 18.2x16.66mm. (e) 4mm thick flat glass superior quality for two shutter. (f) IDPE rubber gasket for fixing glass. (g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters. (j) aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter.(k) Fixing screws for frame with wall 06 per window with fancy design.(Note: Window will be measured outer to outer frame and no extra to be paid. |
| 62 | S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard complete all as specified and directed. |
| 63 | M&L for 30mm width of flap MS piano hinges complete as directed at site |
| 64 | S&F Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed |
| 65 | S&F Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed. |
| 66 | S&F for 300 mm mild steel helical spring including roller and roller plate, complete all as specified and directed |
| 67 | S&F for MS Butt hinges medium weight, cold rolled Mild Steel for 100 mm size all as specified |
| 68 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm) |
| 69 | S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm) |
| 70 | S&F in repairs Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed |
| 71 | S&F in repair Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed. |
| 72 | M&L for framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290.all as directed |
| 73 | S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 74 | S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 75 | Hacking out old broken glass (any thickness, size, quality or desereption) from wooden/Steel frames. |
| 76 | S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pan including glazing pins where required. |
| 77 | S&F 3.00mm thick pin head, figured glass and glasing with oil putty in Squres/Ractangle n.exc 0.5 Sqm in each paneincluding glazing pins where required. |
| 78 | M&L for cement concrete type B1,1:2:4 (20 mm graded crushed stone aggregate) as in coping, bed block , water trought, hold fast and similar works including rounding, chamfered and throting complete all as specified |
| 79 | S&F in repairs decorative curtain rod made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colour and pattern as approved overall dia 28 to 28mm, includiing and including two nos brackets on each ends alongwith globe on each ends for earch window/door fro fixing complete all as specified and directed with fancy design |
| 80 | S&F in repairs curtain rails 20 mm dia, mild steel, chromium plated including with fixing brackets, stops, rollers etc for cub board. |
| 81 | S&F in repairs utensil rack / Kitchen rack stainless steel size 850 mm x 800 mm x 270mm approved Make complete all as specified and directed with fancy design. |
| 82 | Supply and fix in repair, sinks with drainage board made of stainless steel 1 mm thick sheet for, kitchen or laboratory with plugs, washers and waste pipe; cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed by Engr-in-Charge. |
| 83 | S&F in repar vitreous China squatting pattern water closet 'orissa pattern ' size 580 x 440 mm white with integrated foot rests including provn of lime concrete |
| 84 | S&F in repaire Premium one piece ceramic western floor mounted one piece water closet western commode with soft closed seat cover for Lavatory in built flushing cistern, toilet including connection to drain ( or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap. |
| 85 | S&F in repaire Vitreous china white wash down water closet (Pedestal pattern) including connection to drain ( or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap. |
| 86 | S& F in repairs only plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or anodised hinging device |
| 87 | S&F in repair 600mm x 450 mm bevelled edge mirror of selected quility glass, mounted on 6 mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screwes and cup washers complete (with fancy design) |
| 88 | S&F in repair Bath cabinet mirror of size 350 x 450 mm made of PTMT alloy complete all as specified. With fancy design. |
| 89 | S&F inrepair Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positiion complete in all respect as specified |
| 90 | S&F in repair chromium plated hand shower with fancy design. |
| 91 | S&F in repair chromium plated toilet paper holder size 150 x150mm complete all as specified and directed. |
| 92 | S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed. |
| 93 | S&F in repairs. vitreous china wash basin, white flat back size 550x400mm (excluding taps, incl.CP waste coupling & PVC waste pipe and brackets |
| 94 | S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed with fancy design. |
| 95 | Taking up or down steel tubing and connection of 15 dia bore. |
| 96 | Taking up or down steel tubing and connection of 20 dia bore. |
| 97 | Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth. |
| 98 | Supplying and laying 16mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down 15mm dia steel tubing and connections from wall / ceiling or laid floors including cleaning for refixing all as directed. |
| 99 | S&F 15mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor |
| 100 | Refixing old steel tubing and connections in new or old position 15mm dia |
| 101 | S&F 20mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor |
| 102 | Refixing old steel tubing and connections in new or old position 20mm dia |
| 103 | S&F in repairs pillar tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered head 'HOT' or 'COLD' with long screwed shank and flynuts screwed for iron pipe (half turn type) |
| 104 | S&F in repair stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore. |
| 105 | S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design (half turn type) |
| 106 | S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design (half turn type) |
| 107 | S&F in repairs brass CP wall mixer tap, fancy type, half turn 15mm dia bore (three in one) for mixing hot and cold water screwed down for iron pipe and fixed in wall and all as specified and directed. |
| 108 | S&F in repairs Brass CP mixer basin tap (mixer pillar tap) 15mm dia bore for mixing hot & cold water with lettered HOT and COLD screwed down for iron pipe with fancy design. |
| 109 | S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule (half turn type) |
| 110 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm |
| 111 | M&L for brass Chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union incl shower. |
| 112 | S&F in repair Brass chromium plated tubular towel rail 20mm dia,D type, 60 cm long between flanges. |
| 113 | Dismantalling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (three layer) (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. |
| 114 | Dismantalling of existing water tanks and removinging to store and S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (three layer) (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. |
| 115 | S&F as in repair water tank cover for 500/1000 Ltrs capacity suitable for PVC tank |
| 116 | M&L for cleaning and removing all scale and dirt etc, from 1000 ltr tanks and from mouths of circulating pipes etc,complete all as specified and directed. |
| 117 | S & F in repair 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) |
| 118 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 119 | S&F in repair Corner Glass Shelf 300 mm (with fancy ABS brackets) of size (300x300)mm complete all as specified and as directed with fancy design. |
| 120 | S&F in repair CP soap Dish approx size 160x 160x90mm complete all as specified and directed |
| 121 | M&L for roof treatment in repair by complete removel of existing old treatment and treated with following specifications :-(a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab.(b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab.(c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface.(d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction.(e) Applying two coat of aluminium paint @200 gm/Sqm over bituminous surface of membrane.Note : Supply only WPC shall be measured and paid separately under relevant item. |
| 122 | Supply only integral water proofing compound. (Make - ACCO PROOF/WATER SEAL/ IMPERMO) |
| 123 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site |
| 124 | M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 125 | M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 126 | S&F PVC (SWR) bends 110 mm bore of any radius all as specified & directed |
| 127 | S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed.. |
| 128 | S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door all as specified & directed.. |
| 129 | S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door all as specified & directed.. |
| 130 | S&F 110 mm bore PVC (SWR) vent cowl. |
| 131 | S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement. |
| 132 | S&F 110mm dia PVC (SWR) WC connector with lip ring |
| 133 | M&L for 100 mm thick cement concrete in foundations/sub base of floor in cement morter (1:4:8) type D-2 complete all as specified and as directed by Engr-in-Charge. |
| 134 | M&L for coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cmx30cmx25mm thick over 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engr-in-Charge. S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
