|
| 1 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 3 | Rendering 15 mm thick in cement and sand mortar 1:4 on other than fair faces of brick work or cement concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 4 | Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 5 | Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed |
| 6 | Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and as directed. |
| 7 | Ditto all as per Srl item No. 6 here-in-before, but except bricks. |
| 8 | Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius built in cement sand mortar 1:4 in half brick thick wall complete all as specified and directed |
| 9 | Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 10 | Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 11 | Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. |
| 12 | Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and as directed. |
| 13 | Preparation of old painted surfaces by washing, rubbing down and stopping of distempered and painted walls and applying one coats of oil bound distemper complete all as specified and as directed. |
| 14 | Ditto all as per item No 13 here-in-before but applying one coat of distemper oil emulsion on ceiling only. |
| 15 | Preparation of old painted surfaces by washing, rubbing down and stopping of plastered surfaces and applying one coat of cement base paint white or tined on wall complete all as specified and as directed. |
| 16 | Preparing old surface (plastered or unplastered) surfaces of walls including cornices, pilasters etc by washing, rubbing, stopping brooming down with steel wire brushing and applying one coat of white wash on walls, complete all as specified. |
| 17 | Preparation of old plastered surfaces and applying 3 mm thick external all care putty over two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on wall surface, complete all as specified and directed.Note:-(i) The work shall be carried out in different shade and the same shall be got approved from Engineer-in-charge/GE/(ii) The work shall be carried out upto 4th storey of bldgs and no extra payment shall be admissible for necessary form work & scaffolding required for the same. |
| 18 | Ditto all as per item No 17 here-in-before but applying two coats of white washing on walls only. |
| 19 | Ditto all as per item No 17 here-in-before but applying one coat of white washing on ceiling only. |
| 20 | Complete removal of old existing treatment of wall and applying two coats of oil bound distemper over one coat of primer white or tinted over a coat of 2mm thick wall care putty complete all as specified and directed. |
| 21 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed. |
| 22 | 40 mm thick PCC 1:2:4 type B-1, (Using 20 mm graded crushed stone aggregate) as in flooring finishing the top surface even and smooth complete all as specified. |
| 23 | 50mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, complete all as specified. |
| 24 | 75mm thick PCC (1:3:6) type C-1 (using 40mm graded crushed stone aggregate) as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed. |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 26 | 25mm thick PCC 1:2:4, type, B-0 (using 12.5mm graded crushed stone aggregate) as in floor finished even and fair to receive tiles, kota stone complete all as specified and directed. |
| 27 | Non skid coloured ceramic tiles 7 to 8 mm thick(square / rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) finished fair and even, complete all as specified and directed. |
| 28 | Ditto all as per item no 27 but in skirting over and including 10mm thick rendering in CM 1:4 |
| 29 | Glazed ceramic tiles 450 x 300 x 7mm thick / 350 x 250 x 7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 30 | Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) area of each tile not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 31 | Ditto all as per Item No 30 here-in-before but as skirting including 10mm thick plaster in CM 1:4 complete all as specified and directed . |
| 32 | Repair to balcony Facia and soffit of chajjas etc by taking down old rendering and applying 15mm thick cement plaster to match the existing thickness in CM 1:3 and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqm in width or girth including preparation of surface and applying two coats of cement base paint as required over one coat of primer including necessary formwork/scaffolding work upto height 7mtr above ground level of bldg complete all as specified and as directed. |
| 33 | Dismantling of AC/CGI/Galvalume sheets corrugated or semi-corrugated in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed. |
| 34 | Pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 35 | Pre-painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 36 | Dismantling of wall and ceiling boards (fibre, pulp, insulation,etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, ceiling cover fillets, GI framework complete all as specified. |
| 37 | Including 4mm thick pre-laminated designer ceiling board to be provided GI snap grid frame work (Grid size 600x600mm) with powder coated GI angle of size 25x25x3mm fixed along wall perimeter, main runner 'T' of size 25x40x3mm , secondary runner 'T' of size 25x30x3mm suspended with 3mm GI wire @ 1200mm c/c of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels, complete all as specified and as directed. |
| 38 | Vitreous china squatting pan \\"Orissa Pattern\\" size 580 x 440 mm in white colour with integral foot rest (excluding flushing cistern, flush pipe) incl lime mortar, 'P' trap 110mm bore, connection to trap and flush pipe fixed in repairs complete all as specified and directed. |
| 39 | Supply and fixing in repairs single piece Rimless bowl with cistern for extended wall hung WC with PP soft close seat cover,hinges ,dual flush cistern fittings,and all accessories in all as specified and as directed as approved by GE. |
| 40 | Vitreous china wash down water closet pan pedestal pattern in white colour excluding seat cover, flushing cistern and flush pipe fixed in repairs complete all as specified and directed. |
| 41 | PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed in repairs, complete all as specified and as directed. |
| 42 | Vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe fixed in repairs all as specified. |
| 43 | Syphonic kit for all type of flushing cistern inlcluding fixing all accessories for single piece WC including supply and fixing in repairs complete all as specified and directed. |
| 44 | Vitreous china wash basin, white, flat back, size 550x400mm including CP mixer for mixing hot and cold water for pipe of bore 15mm, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets and waste pipe etc., fixed in repairs complete all as specified and as directed. |
| 45 | 600mm x 450mm beveled edge mirror of selected quality glass, mounted on 6mm thick commercial quality ply-wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete supplied and fixed in repairs, all as specified. |
| 46 | Supply & fixing in repair bath cabinet of size 360mmx450mmx90mm deep with glass of size 320mmx450mmx3mm thick or equivalent make as mentioned in list of make to P.S as approved complete all as specified and as directed. |
| 47 | PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed, complete all as specified and as directed. |
| 48 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls, floors, or ceiling and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 49 | Description all as per srl Item No-48 above, but 20 mm bore. |
| 50 | Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 51 | Ditto all as per srl Item No-50 above, but 20 mm bore. |
| 52 | 16mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 53 | 20mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 54 | Refixing old steel tubing and connections of 15mm bore in new or old position (Walls, ceiling, floors etc.) including cleaning for refixing complete all as specified and as directed. |
| 55 | Ditto all as per srl Item No-54 above, but 20 mm bore. |
| 56 | Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15mm fixed in repairs, complete, all as specified & directed. |
| 57 | Bib taps (Long body) 15 mm, fancy type Chromium plated with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified. |
| 58 | Pillar tap of 15mm bore dia fancy type capstan heads, chromium plated screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified and directed. |
| 59 | Health faucet with one mtr long flexible tube and wall hook chromium plated screwed down for iron pipe fixed in repairs, complete all as specified and as directed. |
| 60 | Plastic water closet seat cover white closed pattern with flat bottom and cover including chromium plated hinges device fixed in repairs, complete all as specified and as directed. |
| 61 | 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) fixed in repairs, complete all as specified |
| 62 | Plate rack made of stainless steel 0.8mm thick overall size 786mm x 610mm x 254mm complete all as specified and directed. |
| 63 | Brass chromium plated fancy type wall mixture for mixing of hot and cold water supply screwed down including connecting leg & wall flange for iron pipe 15 mm bore fixed in repair complete all as specified and as directed. |
| 64 | S&F in repairs sinks with drainage board made of stainless steel (1mm thick) kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm as approved by Engr-in-Charge complete all as specified and directed. |
| 65 | 20mm bore gun metal glove or gate valve with iron wheel head screwed bith end for iron pipe and fixed in repairs, complete all as specified and as directed. |
| 66 | Rotational moulded polyethylene 03 layer water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed. |
| 67 | Rotational moulded polyethylene 03 layer water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and as directed. |
| 68 | Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) n.exc 1.5 Sqm each, complete all as specified and directed. |
| 69 | Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each, complete all as specified and directed. |
| 70 | Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each, complete all as specified and directed |
| 71 | Taking down and refixing including resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed. |
| 72 | Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25 x 3mm thick flat iron projecting 10cm on either side & tarring back of chowkats and holdfasts, complete all as specified & directed. |
| 73 | Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25X3mm thick flat iron projecting 10cm on either side & tarring back of chowkats and holdfasts, complete all as specified & directed. |
| 74 | PCC 1:2:4 type C-0 (using 12.5 mm graded crushed stone aggregate) as in roof kerb, padding , finished surface even and fair, complete all as specified and directed. |
| 75 | PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) for hold fast blocks,back filling of chowkhats including necessary form work for rough finished surfaces etc complete all as specified and as directed. |
| 76 | 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified. |
| 77 | 35mm thick 2nd class soft wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc devided into square with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed. |
| 78 | Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and directed. |
| 79 | Factory made solid panel PVC door shutter/ cupboard shutter/ kitchen cabinets 30mm thick style wooden texture consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site, complete all as specified and directed. |
| 80 | Aluminium powder coated sliding window, chowkat of size 63mm x 40 mm x 1.3 mm thick with aluminium powder coated two track frame of size 63 mmx 32mmx 1.3 mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail,bottom rail and style of size 40mmx 18mm x 1.3 mm thickscrewed to wall/floor including provn of 4mm thick tinted sheet glass fitted in panel including necessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.4 mm to aluminium frame with and including aluminium grill fitted with aluminium flat of size 40mm x 3mm complete all as specified and as directed. |
| 81 | Aluminium powder coated sliding window, chowkat of size 92mm x 40 mm x 1.3 mm thick with aluminium powder coated three track frame of size 92 mmx 32mmx 1.3 mm thick with 2 Nos sliding shutter of powder coated aluminium section (top rail,bottom rail and style of size 40mmx 18mm x 1.3 mm thick screwed to wall/floor including provn of 4mm thick tinted sheet glass fitted in panel including necessary locking device , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed including fixing of stainless steel wire cloth 0.36mm nominal dia of wire and width of aperture 1.4 mm to aluminium frame with and including aluminium grill fitted with aluminium flat of size 40mm x 3mm complete all as specified and as directed. |
| 82 | Aluminium powder coated door shutter with powder coated frame of size 65mm x 50 mm x 1.6 mm thick fixed with hinges and shutter with top rail,bottom rail, middle rail and style of size 85mmx 44mm x 1.6 mm thick with 200mm size aluminium handle on both side of shutter aliminium tower bolt 150 mm long 2 Nos per leaf including 5.5 mm thick selected quality , joining cleats, glazing clips, rubber neoprene packing, aluminium beading and screwed hydraulic door closer for each leaf , mortic lock 4 levers with 2 Nos key , 3Nos butt hinges of stainless steel for each shutter including provn of 8 mm dia nut and bilt on both side of top rail and bottom rail complete all as specified and as directed. |
| 83 | Powder coated aluminium door/ partition sections with standard aluminium sections for frame work, for glazed shutters, partitions, ventilators with one or more rebates including joiining cleats, aluminium beadings etc for fixing etc. complete all as specified. |
| 84 | Powder coating Anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/m (glass & wire mess shall be measured and paid separetely) including necessary joining cleats, glazing rubber packing, anodised aluminium clips, snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 N.) and 100 mm long aluminium tower bolt (02Nos) per shutters complete all as specified. |
| 85 | Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed. |
| 86 | 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed. |
| 87 | 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed. |
| 88 | Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed. |
| 89 | Door closer of aluminium (Die cast body), hydraulically regulated, designation No 3, universal type, suitable for door shutters of size 851mm to 1000mm of width , ISI marked fixed in repairs, complete all as specified and as directed. |
| 90 | Aluminium mortice lock (4 levers) 100 mm long vertical type fixed in repairs, complete all as specified and as directed. |
| 91 | 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, fixed in repairs complete all as specified and as directed. |
| 92 | 25 mm dia aluminium anodised curtain rod complete with stainless bracket and side caps fixed in position by drilling holes in wall and fixed the bracket with rawl plug and SS screw fixed in repairs, complete all as specified and as directed. |
| 93 | Taking down eaves gutters and rain water pipe , soil and waste pipe PVC or CI (any size or pattern ), includding all fittings, heads , shoes bends , swan-necks etc all as specified and directed. |
| 94 | 110mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in floors or trenches etc., complete all as specified and directed. |
| 95 | 110mm bore PVC SWR Type-B pipes single socket in any length with rubber joint fixed to wall with PVC//MS holder clamp etc complete all as specified and as directed. |
| 96 | 75mm bore PVC SWR Type-B ( pressure not less than 6 kg /cm2) pipes single socket in any length with rubber ring joints laid in floors or trenches etc., complete all as specified and directed. |
| 97 | 75mm bore PVC SWR Type-B pipes single socket in any length with rubber joint fixed to wall with PVC//MS holder clamp etc complete all as specified and as directed. |
| 98 | PVC SWR reducer 110mm to 75 mm complete all as specified and as directed. |
| 99 | PVC SWR vent cowl 75 mm complete all as specified and as directed. |
| 100 | PVC (SWR) bend 110 mm dia any radius all as specified and directed |
| 101 | PVC (SWR) junction single (single T) equal or unequal 110 mm dia all as specified and directed. |
| 102 | PVC (SWR) bend 75 mm dia any radius all as specified and directed |
| 103 | PVC (SWR) 75 mm dia floor trap plain with grating including jointing with solvent cement fixed in repairs, all as specified and directed |
| 104 | PVC (SWR) junction single (single T) equal or unequal 75 mm dia all as specified and directed. |
| 105 | Steel windows/ventilator (Box type) factory made with double shutter with or without devetailed bar ( glass & glazed shutter) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 .Note:-(a) Fixed type glass panes shutter if any provided in above same window shall be measured and paid separately & area of these fixed shutter shall be deducted from total area of box type window for payment purpose. (b) Sheet glass/ wire cloth shall be measured & paid seperately under respective item |
| 106 | -Ditto- all as per item No 105 above but without glazing bars and without grill/guard bar. |
| 107 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified and directed. |
| 108 | 03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified. |
| 109 | Figured glass pin headed type, 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified. |
| 110 | 5.5 mm thick tinted sheet glass, selected quality and glazing with aluminium beads and rubber packing in square not exceeding 0.5 square metre in each pane fixed in repairs, complete all as specified and as directed. |
| 111 | 4 mm thick tinted sheet glass, selected quality and glazing with aluminium beads and rubber packing in square not exceeding 0.5 square metre in each pane fixed in repairs, complete all as specified and as directed. |
| 112 | Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 113 | Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete in repairs all as specified and directed. |
| 114 | Preparation of new steel and iron surfaces of any description over 10cm in width or girth not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 115 | Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified and directed. |
| 116 | Preparation of old steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 117 | Preparation of old wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth, and appying one coat of synthetic enamel paint complete all as specified and as directed. |
| 118 | Taking down and refixing in position of aluminium door shutters of any size and description and making functional by way of repair/ replacement of floor spring, hydraulic door closer, hinges, lock, rubber packing etc as required complete all as specified and as directed . |
| 119 | Sunken Floor treatment :-Providing and laying of water proofing treatment to sunken portion including vertical portion by applying cement slurry mixed with acrylic based polymer modified cementitious composite compound of make as specified and approved including demolition and filling of sunken floor with & including PCC 1:5:10 type E-2 (using 40mm brick aggregate).(a) First layer of slurry of cement @0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm. This layer allowed to air cure for 4 Hours.(b) Second layer of slurry of cement @0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.125 Kg/Sqm. This layer allowed to air cure for 4 Hours.(c) 15mm thick plaster in CM 1:3 mixed with WP compound to be provided while concrete is still green.(d) Joint of/Trap/WC/Soil pipes shall be properly sealed with sealing compound.Note:(a) Concrete for sunken slabs shall be mixed with WP compounds as per manufacturer's instructions. Before carrying out water proofing treatment the sunken slab shall be tested with water for 48 hours for any leakage /dampness is seen in ceiling below, then treatment is again carried out to RCC slab and it is again tested before passing for next stage. (The rate quoted includes water proofing compound as per manufacturers instructions).(b) Please note that only floor area shall be measured for payment purpose. |
| 120 | Prelaminated particle board 18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in repairs with screws to timber frame work, complete all as specified and directed. |
| 121 | Intermat auto closing concealed hinge including supply and fix, complete all as specified and directed. |
| 122 | 6\\" premium quality crome finish Handle including supply and fix complete all as specified and directed. |
| 123 | Good quality Telescopic channel set for drawer multi-tech high capacity 500 mm long fixed in repairs complete all as specified and directed. |
| 124 | 19-20mm wide and 0.80mm thick decorative type PVC beading fixed in repairs complete all as specified and directed. |
| 125 | Glass shelf of 600 mm long with cp bracket fixed in repairs in repair complete all as specified and directed. |
| 126 | Glass corner shelf with cp brakcket fixed in repairs in repair complete all as specified and directed. |
| 127 | Stainless steel gratings 100/125mm dia with waste hole fixed with cement motar fix in repair complete all as specified and directed. |
| 128 | Waste pipe for WHB/Urinal for 32/40mm dia fixed in repair complete all as specified and directed. Please Enable Macros to View BoQ information |
