|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 2 | P/Laying of stone soling i/c carriage etc complete job |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl. carriage |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form work |
| 5 | Engagement of JCB with tippers for dismantling the existing and damaged boundary wall and fencing and disposal of material from the site upto 2km |
| 6 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 7 | P/Laying of stone soling i/c carriage etc complete job |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) incl. carriage |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) incl. carriage |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl. carriage |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Cement mortar 1:6 ( 1 cement : 6 coarse sand) and incl Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level incl. carriage |
| 13 | Providing & laying Coping 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete incl. carriage incl. carriage |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars |
| 15 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work |
| 16 | Engagement of labours for clearance of site including removal of bushes |
| 17 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 18 | P/Laying of stone soling i/c carriage etc complete job |
| 19 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl. carriage |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form work |
| 21 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of Welded incl. carriage |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 23 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On concrete work |
| 24 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 25 | Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in All kinds of soil: i/c carraige UPTO 5KM |
| 26 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately). with grass turf |
| 27 | Supplying and placing a three seater bench that shall be constructed from metal frame. The seat and back shall be made of high quality cold rolled MS sheet of 1.2m thick, pressed and welded to form the shape. The seat and back shall be electrostatically coated with 40-60µ thick epoxy powder and then cured under heat to allow it to form a skin. The seat and back shall have round perforated sheet i.e. 4.5mm Dia. hole. The seat shall be supported on 2.5mm thick CRCA powder coated hinge which is mounted over MS pipe having length 1600mm with cross-section area 50mm X 50mm with 2mm thick. The armrest shall be made up of MS powder coated 40mm width with 1mm thick. The base or leg shall be 49mm width made of 1mm thick CRCA powder coated sheet. There shall be leveler shoe provided with metal insert at the bottom to avoid scratches on the floor. The individual seat size shall be 415±10 mm(D) X 450±10 mm(W), seat height = 420±10 mm, overall width = 1600±10 mm, overall depth = 600±10 mm & overall height = 790±10 mm. The chairs must be fastned with anchor bolts The manufacturer shall have basic quality and safety certifications like ISO-9001:2015, ISO 14001: 2015, ISO-18001:2007 (bench Should be fixed in M-20 Grade of Concrete) |
| 28 | Providing and fixing Open Mouth Penguin Dustbin,Size 2 x 2 x 3 Feet; including all carriages involved as per direction of Engineer In Charge |
| 29 | Engagement of labours for clearance of site including removal of bushes |
| 30 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 31 | P/Laying of stone soling i/c carriage etc complete job |
| 32 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl. carriage |
| 33 | Centering and shuttering including strutting, propping etc. and removal of form work |
| 34 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of Welded incl. carriage incl. carriage |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work |
| 36 | Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in All kinds of soil: i/c carraige UPTO 5KM |
| 37 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately). with grass turf Please Enable Macros to View BoQ information |
