|
| 1 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm) |
| 2 | Renewing glass panes, with wooden fillets wherever necessary :Float glass panes of thickness 5.0 mm (weight not less than 12.5kg/sqm) |
| 3 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm With 2nd class teak wood beading 62x19 mm |
| 4 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 5 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part-I : 2011 (Board with BIS certification marks) |
| 7 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL antitreatment Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor: |
| 8 | Repair of Kota Stone/granite by way of removing broken slab pieces and replacing it with new one along with mortar below, grinding and polishing complete job. Repair area less than 1.8 sqm. |
| 9 | Repair of Tiles by way of removing broken tile pieces and replacing it with new one along with mortar below, grinding and polishing complete job. Repair area less than 1.8 sqm. |
| 10 | Repair of Bed along with necessary ply changing/ legs replacement alon with necessary fixing with fevicol and nails etc complete job. |
| 11 | Repair of Side Table along with changing of drawer channels with necessary fixing with polishing, fevicol and nails etc complete job. |
| 12 | Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning anyGI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 13 | Labour engaged for cleaning of roofs & courtyard area of staff qtrs. By collecting leaves and other waste material and disposal of same within 50 mtrs. lead |
| 14 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm |
| 15 | Engaging carpenter for day to day repairs to woodwork like doors, windows etc |
| 16 | Engaging welder for day to day repairs like doors, windows etc |
| 17 | Engaging plumber for day to day sanitary repairs etc |
| 18 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 19 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarsesand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase |
| 20 | Providing and fixing of Asbestos sheets roofing 6 mm thick and fixing with G.I. pr J hook bolts and nuts 8 mm dia G.I. plain washers complete. |
| 21 | Providing and fixing of fibre sheet on door(meshed)/chajjas 4mm thick with nails and screws complete job. |
| 22 | Removing dry or oil bound distemper, waterproofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 23 | Repairs to plaster of thickness of 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of walls complete including disposal of rubbish to the dupming ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand) |
| 24 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 25 | 1 mm thick |
| 26 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface complete job |
| 27 | Distempering with Oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 28 | Painting with premium acrylic emulsion paint of interior grade having VOC content less than 150grams/litre of approved brand and manufacture, icluding applying additional coats wherever required. in patches two or more coats in approved colour and shade. |
| 29 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 30 | Finishing wall with acrylic smooth exterior paint of repaired shade old work (two or more coats)applied @1.67 litre /10sqm on existing surface . |
| 31 | French spirit polishing one or more coats one old work |
| 32 | Grinding of dholpur stone including moulding with buffing machine using chemical on external façade complete to make the surface clean and smooth including scaffolding , ladder upto a height of 16 ft to 20 ft complete job. |
| 33 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 34 | Providing and fixing of Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (300x450) |
| 35 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 36 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm. |
| 37 | P/F overhead counter cabinets madeout of 19mm thick commercial board, 6mm thick ply on backside and all inside/outside surfaces fitted with sunmica and piano hinges of standard quality incld. Handles, tower bolts complete job. |
| 38 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) First class kail wood. |
| 39 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 40 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below |
| 41 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood. 35 mm thick shutter |
| 42 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood 35 mm thick shutter |
| 43 | Providing & fixing cupboard made out of 19mm thick commercial board & 6mm ply on back ISI marked of standard quality as approved) all inside surface finished in laminate 0.8 mm thick of approved shade & quality, slidding shutters running sliding fittings (hettich or equivalent) made up of 19mm thick board lipped with laminate on inside, outside and backside on almirah and complete in all respects including all hardware fittings as approved hettich or equivalent) |
| 44 | Providing and fixing of sanitary fittings , fixtures complete job. |
| 45 | Polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank terrace (at all floor levels) |
| 46 | Water tank cover |
| 47 | European WC (Jaquar) single piece with soft close seat and cover complete job. |
| 48 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern ofcapacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 49 | PVC cistern (parryware or equivalent) |
| 50 | Wc seat cover (Parryware or equivalent) |
| 51 | Wc seat cover (Jaquar) |
| 52 | PVC long bend |
| 53 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:- Internal work-Exposed on wall |
| 54 | 15mm nominal bore(medium) jindal/ prakash/surya or equivalent |
| 55 | 20mm dia. Nominal bore medium ( Jindal/ prakash/surya or equivalent) |
| 56 | 25mm dia. Nominal bore medium ( Jindal/ prakash/surya or equivalent) |
| 57 | Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: |
| 58 | 15mm nominal bore ( medium) Jindal, prakash |
| 59 | 20mm dia. Nominal bore medium ( Jindal/ prakash/surya or equivalent) |
| 60 | Providing and fixing G.I. pipes complete with G.I. fittings excludingtrenching and refilling etc. (external work) |
| 61 | 15mm nominal bore(medium) jindal/ prakash/surya or equivalent |
| 62 | 20mm dia. Nominal bore medium ( Jindal/ prakash/surya or equivalent) |
| 63 | 25mm dia. Nominal bore medium ( Jindal/ prakash/surya or equivalent) |
| 64 | Laying and fitting of G.I. pipes (all classes) complete excluding cost ofpipes, fittings and Earth work. |
| 65 | 15 mm and 20 mm dia. G.I. Pipes |
| 66 | 25 mm and 32 mm dia. G.I. Pipes |
| 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work exposed on wall |
| 68 | CPVC 1/2\\" |
| 69 | CPVC 3/4\\" |
| 70 | CPVC 1\\" |
| 71 | Providing and fixing PVC pipe embedded in 1: 5: 10 inclu. trenching and refilling and making good the floor and wall complete. |
| 72 | 110mm nominal bore (medium) supreme , prakash or equivalent |
| 73 | 150mm dia. Nominal bore medium |
| 74 | 200mm dia. Nominal bore medium |
| 75 | Providing and fixing PVC pipes including all fittings .supreme , prakash or equivalent(external work) |
| 76 | 110mm nominal bore (medium) |
| 77 | PVC Tee 4\\" |
| 78 | PVC Door bend 4\\" |
| 79 | PVC Socket 4\\" |
| 80 | PVC Elbow 4\\" |
| 81 | PVC P-trap 4\\" |
| 82 | PVC Cowl 4\\" |
| 83 | PVC Clamp 4\\" |
| 84 | 75mm dia nominal bore(medium) |
| 85 | PVC Elbow 3\\" |
| 86 | PVC Door bend 3\\" |
| 87 | PVC Tee 3\\" |
| 88 | PVC Socket 3\\" |
| 89 | PVC trap 3\\" |
| 90 | Long body bibcock (Jaguar or equivalent) |
| 91 | Washbasin (Parryware or equivalent) 20\\"x16\\" |
| 92 | Long body bibcock (Parry ware or equivalent) |
| 93 | Short body bibcock (Jaguar or equivalent) |
| 94 | Shory body bibcock (Parry ware or equivalent) |
| 95 | Angle valve |
| 96 | Waste pipe |
| 97 | Wall mixer (Parryware or equivalent ) |
| 98 | Wall mixer (Jaguar ) |
| 99 | Wash basin mixer (Parryware or equivalent ) |
| 100 | Wash basin mixer (Jaguar ) |
| 101 | Waste coupling |
| 102 | Ballcock (heavy)1 inch DRD,prayag or equivalent |
| 103 | Single Lever Exposed parts of Divertor (KiT) consisting of operating lever cartridge, sleeve, wall flange ( with seals) |
| 104 | Gate valve 1/2 '' |
| 105 | Gate valve 3/4'' |
| 106 | Gate valve 1'' |
| 107 | Nahani trap |
| 108 | C.P. Jali 4\\" |
| 109 | PVC connection 18 '' |
| 110 | PVC connection 24 '' |
| 111 | Half phase |
| 112 | Round phase |
| 113 | Shower ( Jaquar) |
| 114 | Shower ( Parryware or equivalent ) |
| 115 | Shower rod ( Jaquar) |
| 116 | Shower rod (Parryware or equivalent ) |
| 117 | Pillar cock (Jaquar) |
| 118 | Pillar cock (Reva/ Prayag or equivalent) |
| 119 | Health faucet (Jaquar) |
| 120 | Health faucet (Parryware or equivalent) |
| 121 | Paper Holder |
| 122 | Jet (Parryware or equivalent) |
| 123 | Cistern Syphon (Jaquar or equivalent) |
| 124 | Soap dish |
| 125 | PVC Cistern Ball Cock |
| 126 | Washbasin Jaqaur |
| 127 | PVC Shelf 18\\" |
| 128 | Towel rod 2' |
| 129 | Glass Shelf 24\\" |
| 130 | Bottle Trap ( Jaquar) |
| 131 | Providing and fixing hardware fittings |
| 132 | Tower bolt SS 6\\" |
| 133 | SS handle 6\\" |
| 134 | SS hinges |
| 135 | Godrej Door lock |
| 136 | Door Stopper (SS) |
| 137 | Door closer (Hardwyn, Godrej) |
| 138 | Almirah lock (Godrej) |
| 139 | Aldrop ss 8\\" |
| 140 | Hanger 24\\" |
| 141 | Door seal 3' |
| 142 | Catcher |
| 143 | Door machine heavy duty(hardwyn or equivalent brand) with rubber for glass |
| 144 | SS hinges al bihari ( Hettich) |
| 145 | Channels ( Hettich) |
| 146 | SS hanger rods with brackets 3' (1\\") dia |
| 147 | Sliding reducer/Channel (hettich) |
| 148 | Cylindrical lock Godrej |
| 149 | Slding drawer channels |
| 150 | Brass Aldrop 10\\" |
| 151 | Brass handle 6\\" |
| 152 | BrassTower bolt |
| 153 | Brass door stopper |
| 154 | P/F 19 mm thick board in shelves, shutters with veneer and polishing complete job. |
| 155 | P/F 6mm thick plyboard incld. Nuts, fevicol etc. |
| 156 | Removal of waste by mechanical means and disposal of the same beyond municipal limits |
| 157 | Supplying and fixing C.I. cover without frame for manholes Rectangle cover 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. |
| 158 | Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 600x450 internal dimensions. |
| 159 | Rectangular shape 600x450 internal dimensions |
| 160 | Providing and laying APP (Atactic Poly Propylene Polymer ) modified prefabricated five layer water proofing membrane, black finishing reinforced with glass fibre mat consisting of a coat of bitumen primer forbitumen membrane @ 0.40 ltr/sq. mt. by the same membrane manufacture of density at 25°C, 0.87- 0.89 kg/ltr and viscosity 70-160 cps. Over theprimer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vitalphysical and chemical parameters of the membrane shall be as under: Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorized applicator of the manufacture of membrane.With glass fibre matt: Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm. Tear strength in longitudinal and transverse direction as 60/80N.matt: Joint strength in longitudinal and transverse direction at 23°C as 650/450 N/ 5cm. Tear strength in longitudinal and transversedirection as 300/250N |
| 161 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil |
| 162 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:, 50 meter beyond 1 m from cutting edge. |
| 163 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement:2 Coarse Aggregate: 4 Stone Aggregate). Including cariage of materials from quaries upto 100 KM. |
| 164 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement:4 Coarse Aggregate: 8 Stone Aggregate). Including cariage of materials from quaries upto 100 KM. |
| 165 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time |
| 166 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 167 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 168 | Repair and adjustment of shower door by disengaging the glass door and refixing it by asdhjustment of hinges along with greesing complete. |
| 169 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 170 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 171 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes |
| 172 | Providing & fixing wall panelling consisting of water proof 12 mm thick HDHMR (HIGH DENSITY HIGH MOISTURE RESISTANCE) board fixed on walls with the support of formwork made up of alumunium tube (25mm x 50mm) fixed on existing walls using screws complete with cutting for switch boards and other requirements as per design. |
| 173 | Providing & Laying Granite moulding, including chase cutting in wall, rapair of chase with cement mortar and matching pigment. The cost includes granite (40mm X 18mm ) and cement mortar. |
| 174 | Providing and fixing machine cut, mirror / egg shell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. All complete as per Architectural drawings, and as directed by the Engineer- in-Charge. a. 18 mm thick Italian Marble stone slab, Perlato, Rosso Verona, Fire Red or Dark Emperadore etc. |
| 175 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand) |
| 176 | 1 : 4 ( 1 cement : 4 coarse sand) |
| 177 | 1 : 6 ( 1 cement : 6 coarse sand) |
| 178 | Supply of portable Water through tankers from private suppliers. |
| 179 | Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work |
| 180 | Providing and fixing 10 mm thick toughened glass of any size for table top, glazings for windows. |
| 181 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 182 | Repair of chairs by way of removing existing damaged uphostry and replace it with new one , inckuding back ply, foam, nails, fevicol and seating ply includinng carpenter.and polishing/painting of the chair complete in all respects. basic cost of fabric = 1000 per mtr |
| 183 | Less for buy back of old fittings Please Enable Macros to View BoQ information |
