|
| 1 | Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment |
| 2 | a) 4 way Up to 160A Make:-Legrand/L&T/Siemens] [D-11/15] |
| 3 | b) 8 way Up to 160A Make:-Legrand/L&T/Siemens ] [D-11/15] |
| 4 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment [D-10/14] |
| 5 | a) 6 Way Enclosure [Make: Legrand / Siemens/L&T ] |
| 6 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. |
| 7 | a) 2+14 way Enclosure [Make:Legrand/Siemens/L&T ] [D-9, D-10/13] |
| 8 | Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection |
| 9 | (a)100 A FP MCCB (Make Legrand/L&T/ Siemens ) [D-8/10] |
| 10 | (b)125 A FP MCCB (Make Legrand/L&T/ Siemens ) [D-8/10] |
| 11 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. (Make: Legrand /Siemens/ L&T ) [D-5/6] |
| 12 | (a) 63Amp FP Isolator |
| 13 | (b) 40 Amp DP Isolator |
| 14 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make: Legrand /Siemens/ L&T ) [D-6/7] |
| 15 | (a) 6-32 Amps SP MCB [D-6/7] |
| 16 | (b) 6-32 A TP MCB [D-6/7] |
| 17 | (c) 63 Amps TP MCB [D-6/7] |
| 18 | Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment (Make: Legrand /Siemens/ L&T ) [D-12/16] |
| 19 | a) 6 way [D-12/16] |
| 20 | Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment (Make: Legrand /Siemens/ L&T ) |
| 21 | a) 4 way [D-12/16] |
| 22 | b) 8 way [D-12/16] |
| 23 | Supplying & Fixing Industrial Plug & Socket board with 240 V, 20A, SPN & Earth Metal Industrial Plug socket & 20A Industrial top incl. S&F 20 A SP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. [D-12/17] (Make: Legrand /Siemens/ L&T ) |
| 24 | Supplying & Fixing Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl. S&F 32 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection. [D-12/18] (Make: Legrand /Siemens/ L&T ) |
| 25 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make-Polycab/Finolex/RR Kable) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Legrand: Myrius/Arterior ) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed] [E-25/5] |
| 26 | a) Average run 10 mtr [E-25/5(g)] |
| 27 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make-Polycab/Finolex/RR Kable) of the following sizes in the prelaid polythene / PVC rigid pipe and by the prelaid GI fish wire and making necy. connection as required [E-9/1] |
| 28 | i) 3 x 22/0.3 (1.5 sqmm) [E-9/1(b)] |
| 29 | ii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [ E-9/1(s)] |
| 30 | iii) 2x56/0.3 (4 sqmm) + 2x36/0.3 (2.5 sqmm) as ECC [ E-9/1(v)] |
| 31 | iv) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC [ E-9/1(y)] |
| 32 | v) 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC [E-9/1(d1)] |
| 33 | vi) 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC [E-9/1(g1)] |
| 34 | Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works [E-16/7] |
| 35 | a) 20mm size [E-16/7(a)] |
| 36 | b) 25mm size [E-16/7(b)] |
| 37 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F-5/9] |
| 38 | i) 1.5 sqmm |
| 39 | ii) 2.5sqmm [F-5/9(i)] |
| 40 | iii) 4 sqmm [F-5/9(ii)] |
| 41 | iv) 6 sqmm [F-5/9(iii)] |
| 42 | v) 10sqmm [F-5/9(iv)] |
| 43 | vi) 16sqmm [F-5/9(v)] |
| 44 | Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. [E-17/1] |
| 45 | i) 2 Row 18 Module [E-17/1(f)] |
| 46 | ii) 4 Module [E-17/1(a)] |
| 47 | iii) 6 Module [E-17/1(b)] |
| 48 | iii) 8 Module [E-17/1(c)] |
| 49 | Supply & Fixing 240 V 6 A Modular type switch (Legrand: Myrius/Arterior/L&T/ABB approved by EIC) on existing GI Modular type switch board having top cover plate and making necessaryconnections as required. [E-17/3(a)] |
| 50 | Supply & Fixing 240 V 16 A Modular type switch (Legrand: Myrius/Arterior/L&T/ABB approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required [E-17/3(b)] |
| 51 | Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Legrand: Myrius/Arterior/L&T/ABB approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/4(a)] |
| 52 | Supply & Fixing 240 V, 6/16 A, 5 pin Modular type plug socket (Legrand: Myrius/Arterior/L&T/ABB approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/4(b)] |
| 53 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket with 16A Modular type switch of grey/brown/other colour as approved by the authority/E.I.C (Legrand: Myrius/Arterior/L&T/ABB approved by EIC), without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-18/9(b)] |
| 54 | Supply & Fixing 240 V, 25A Modular starter (Legrand: Myrius /Arterior /L&T/ABB approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19/20] |
| 55 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Legrand: Myrius/Arterior/L&T/ABB approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-17/5(a)] |
| 56 | Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Legrand: Myrius/Arterior/L&T/ABB approved by EIC) & necy. Connections. [E-17/5(b)] |
| 57 | Supply & Fixing 240 V, 25A Modular switch type SP MCB (C-Curve) (Legrand: Myrius/Arterior/L&T/ABB approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-19/19(a)] |
| 58 | Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Legrand: Myrius/Arterior/L&T/ABB approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. [E-18/10] |
| 59 | Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board [D-13/20(a)] |
| 60 | Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish [F-3/5] |
| 61 | a) From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc. [F-3/5(i)] |
| 62 | b) Above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc. [F-3/5(ii)] |
| 63 | Supplying and fixing compression type gland and finishing the ends of following XLPE / PVC armoured AL. cable (2/4 / 3.5)Core as per GS. [F-4 & F-5] |
| 64 | i) 4 Core 25 Sq. mm [F-4/7(c)] &[F-5/8(b)(xiii)] ] |
| 65 | ii) 4 Core 35 Sq. mm [ [F-4/7(c)] & [F-5/8(b)(xv)] ] |
| 66 | iii) 4 Core 70 Sq. mm [[F-4/7(c)] & [F-5/8(b)(xvii)] ] |
| 67 | iv)3.5Core 240 Sq. mm [ [F-4/7(d)]& [F-5/8(b)(xxii)] |
| 68 | Supply & delivery of 4'ft LED Twin batten/Metal frame fittings incl. 2nos. 18W Polycarbonate/Aluminium LED tube having luminoius efficacy of 100lm/W [Philips/Lighting Technology/ Wipro] |
| 69 | Supply & delivery of 4'ft LED single batten/Metal frame fittings incl. 1no 18W Polycarbonate/Aluminium LED tube having luminoius efficacy of 100lm/W [Philips/Lighting Technology/ Wipro) |
| 70 | Supply & delivery of recessed mounting 2ftx2ft square 36 Watt LED luminaire of warm-white or cool day light(as per choice of the authority/E.I.C) with glare-free illumination having luminous efficacy- 100lm/W and complete with all accessories (Make : Phillips / Wipro/ Lighting Technology/ Unilux LLT] |
| 71 | Supply & delivery of recessed mounting 8\\"x8\\" Ultra Slim square 15 Watt LED luminaire of warm-white or cool day light(as per choice of the authority/E.I.C) with glare-free illumination having luminous efficacy- 100lm/W and complete with all accessories (Make : Phillips / Lighting Technology/ Wipro/ Unilux LLT ] |
| 72 | Supply & delivery of 18W LED Recess Mounted Panel Light, PDC housing having luminoius efficacy of 100lm/W [Philips/ Wipro/ Lighting Technology/ Unilux LLT ] |
| 73 | Supply of 10W Bulk Head LED Light Fitting Pressure Die Cast housing LED Bulkhead with IP 66 Protection and IK 09 input resistance suitable for surface and wall mounting applications having luminoius efficacy of 100lm/W [Philips/ Wipro/ Lighting Technology/ Unilux LLT ] |
| 74 | Supply & delivery of 12W LED COB Light (Make:-Philips/ Lighting Technology/ Unilux LLT/ Wipro) |
| 75 | Supply & delivery of 18W LED COB Light (Make:-Philips/ Wipro/ Lighting Technology/ Unilux LLT) |
| 76 | Supply & delivery of 40W LED Highbay Light fittings having luminoius efficacy of 100lm/W [Philips/ Wipro/ Lighting Technology/ Unilux LLT) |
| 77 | Supply & delivery of 100W LED Highbay Light fittings having luminoius efficacy of 100lm/W [Philips/ Wipro/ Lighting Technology/ Unilux LLT ] |
| 78 | Supply & delivery of 150W LED Highbay Light fittings having luminoius efficacy of 100lm/W [Philips/ Wipro/ Lighting Technology/ Unilux LLT] |
| 79 | Supply & delivery of 70W LED Flood Light fittings, PDC housing having luminoius efficacy of 120lm/W [Philips/ Wipro/ Lighting Technology/ Unilux LLT] |
| 80 | Supply & delivery of 100W LED Flood Ligh tfittings, PDC housing having luminoius efficacy of 120lm/W [Philips/ Wipro/ Lighting Technology/ Unilux LLT] |
| 81 | Supply & delivery of 150W LED Flood Light fittings, PDC housing having luminoius efficacy of 120lm/W [Philips/ Wipro/ Lighting Technology/ Unilux LLT] |
| 82 | Supply & delivery of 160W LED Flood Light fittings, PDC housing having luminoius efficacy of 120lm/W [Philips/ Wipro/ Lighting Technology/ Unilux LLT] |
| 83 | Supply & delivery of 200W LED Flood Light fittings, PDC housing having luminoius efficacy of 120lm/W [Philips/ Wipro/ Lighting Technology/ Unilux LLT] |
| 84 | Supply & delivery of 30W LED Track Light fittings [Philips/ Wipro/ Lighting Technology/ Unilux LLT] |
| 85 | Supply & delivery of 7W LED Garden Spike Light [Philips/ Wipro/ Lighting Technology/ Unilux LLT] |
| 86 | Supply & delivery of 10W LED Bollard Light fittings [Philips/ Wipro/ Lighting Technology ] |
| 87 | SITC of 180W LED FACADE Light fittings [Philips/ Canara Lighting/K-lite/Leksa/ Unilax LLT ] |
| 88 | Supply & Delivery of 230V, 9W, B22, W/W LED Lamp [Philips/ Wipro/ Lighting Technology ] |
| 89 | Supply & Delivery of 230V, 14W, B22, W/W LED Lamp [Philips/ Wipro/ Lighting Technology ] |
| 90 | Supply & delivery of 1200 mm High speed 35 W , 370 RPM, 220 Cmm ceiling fan.[Make: Orient/ Crompton/Polar BEE star rated as per choice of EIC] |
| 91 | Supply & delivery of 12''(300 mm) Sweep heavy duty best quality AC Wall Bracket/cabin Full metal body Fan (Make : Orient / Crompton / EPC ) |
| 92 | Supply & delivery of 450 mm, 1400 RPM, Heavy duty, Full metal body Exhaust Fan (Make- Orient / Crompton /EPC ) |
| 93 | Fixing only single /twin LED light fitting/LED COB/Track/ Recess Mounted LED Square/Bollard/Garden Light Fittings complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener [C-2/14(b)] |
| 94 | Fixing only bulk head ceiling fitting on wall /ceiling by screws etc. [C-2/13] |
| 95 | Fixing only lamp [C-2/11] |
| 96 | Fixing only Floodlight/Highbay fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required [C-3/20(b)] |
| 97 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [C-3/21(a)] |
| 98 | Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length [C-4/29] |
| 99 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 450 mm [C-4/28 (d)] |
| 100 | Supplying, fabricating, assembling, hoisting, erecting and installing required Chandelier light fixture below ceiling at central Hall of 1st floor suitable for operation in 230V, 50Hz AC supply, complete with approx 155-175 nos. B22 base lamp (3-5W LED of 3K colour) having best quality imported B22 base brass holder and interconnection with suitable copper wire of approved make, made with approx 8250 nos.crystal having following details: 14 mm octogonal, 16 mm octogonal, 18 mm octogonal, 20 mm octogonal, 22 mm octogonal, 24 mm octogonal, 26 mm octogonal, 28 mm octogonal, 25mm x 70mm rectangular Bar. Total = 8250 No. crystal (Crystal Make of Spectra/Ashfour) Frame material: Chandelier frame made of CRC/Aluminium, Main central part by best quality seamless CRC pipe & rod and all outer part. The body hight will be 4ft with 2 rings suspension of 2.5ft & 2 ft rings which will hold 34 DAL sets. Total distribution on main ring of DALS is 40 to 42 DAL sets. Chandelier frame would be crome / lacquer polished finished. The frame weight shall be 1000 kg approx.Best quality brass pin shall be used for the chandelier. Finish of Chandelier: crome / lacquer, Dimension: Dia 9 Feet, Height: 9 Feet. |
| 101 | Supplying, fabricating, assembling, hoisting, erecting and installing required Chandelier light fixture (Custom designed as per attached image) below ceiling at central area of 1st floor Conferance Hall, suitable for operation in 230V, 50Hz AC supply, complete with approx 56-60 nos. B22 base lamp (3-5W LED of 3K colour) having best quality imported B22 base brass holder and interconnection with suitable copper wire of approved make, made with approx 5000 nos.crystal. |
| 102 | Supplying, fabricating, assembling of half Basket type wall bracket suitable for operation in 230V, 50Hz AC supply, complete with approx 6-8 nos. B22 base lamp (3-5W LED of 3K colour) having best quality imported B22 base brass holder and interconnection with suitable copper wire of approved make, made with approx 75 nos.crystal of 16 mm octogonal, 18 mm octogonal, 20 mm octogonal, 22 mm octogonal. Frame material Chandelier frame made of CRC/Aluminium, Main central part by best quality seamless CRC pipe & rod and all outer part. Chandelier fram would be crome / lacquer finished. |
| 103 | Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for Chandelier installation, one storey (9mtr height approx) of building per vertical run |
| 104 | Dismantling of big size chandeliers part by part i.e. base, globe, bend, parts etc step by step from its own position very carefully by skill personnel, with contractors' own tools and tackles, as per direction of E.I.C. |
| 105 | Re-setting the chandeliers spare parts i.e. base, globe, bend, parts etc. step by step after washing, cleaning by soap water to restore original finish & design and thorough testing & safety checking of all hanging chandeliers with contractors own tools & tackles as per direction of E.I.C. |
| 106 | Hire Charges of for making staging arrangement and dismantling the same after completion of work for cleaning, washing of big size chandeliers |
| 107 | Servicing, Cleaning & Checking of Sub-Station. |
| 108 | Servicing, Cleaning & Checking of 500KVA, 6.6KV/433V, Dry Type Indoor distribution Transformer ( Both the Primary & Secondary windings ) including checking all the joints & Testing the same with the help of Motorized Megger in presence of Electrical Supervisor having professional registration. (2 items) |
| 109 | Servicing, Cleaning & Checking of cable end terminations ( Primary / Secondary ) of 500KVA, 6.6KV/433V, Dry Type Indoor distribution Transformer including taking care of preventive taping arrangements by S & F necessary materials as required & Testing the same with Motorized Megger in presence of Electrical Supervisor having professional registration.(4 items) |
| 110 | Servicing, Cleaning & Checking of Neutral Earthing System connected with Brought Out Terminal of Transformer including taking care of preventive insulating arrangements by S & F necessary materials as required followed by Testing the same with Hand Operated Earth Tester in presence of professionally registered Electrical Supervisor.(2 items) |
| 111 | Overall Cleaning & Checking of 500KVA, 6.6KV/433V, Dry Type Indoor distribution Transformer before charging.(2 items) |
| 112 | Servicing, Cleaning & Checking of 6.6KV/110V, 100VA Dry type Potential Transformer prior to receive the Power block from the end of CESC (Scope of Consumer) & commissioning the same.(1 items) |
| 113 | Servicing, Cleaning & Checking of 6.6 kV, 800A, 26.3 kA Vacuum Circuit Breaker Unit, drawn out from the Panel including Checking Mechanical & Electrical Operation & Servicing by the competent personnel including testing the same with the help of Motorized Megger in presence of professionally registered Electrical Supervisor.(3 items) |
| 114 | Servicing, Cleaning & Checking of 6.6 kV, 800A, VCB Panel Board with Bus arrangements, Spouts & contacts followed by checking all the joints including testing the same with Motorized Megger in presence professionally registered Electrical Supervisor.(3 items) |
| 115 | Servicing, Cleaning & Checking of Display Panel Board of 6.6KV, 800A, 26.3 kA Vacuum Circuit Breaker Panel equipped with Ammeter, Voltmeter, System & Transformer protection Relays, Selector Switches, Indicators and others.(2 items) |
| 116 | Servicing, Cleaning & Checking of 800A, 415V, draw out type main Air Circuit Breaker of 415V Distribution Panel Board including Testing the same with Motorized Megger under the Supervision of Chartered Electrical Safety Engineer having NCS registration.(2 items) |
| 117 | Servicing, Cleaning & Checking of the part of Main Distribution Panel/Feeder Panel Board against each Transformer / Emergency Panel Board including all the Out going Switches with their feeder Cable connections including checking all the joints & taking care of preventive insulating arrangements by S & F necessary materials as required and Testing the same with Motorized Megger in presence of Chartered Electrical Safety Engineer having professional registration. |
| 118 | Checking & Testing of Sub station Earthing System with the help of EARTH TESTER in presence of Chartered Electrical Safety Engineer having professional registration including submission of Test Report. |
| 119 | Servicing, Cleaning, Checking & Testing of Display Panel Board of 415V Main Distribution Panel / Emergency Panel Board equipped with Ammeter, Voltmeter, Selector Switches, Indicators with their auxiliary circuits including Testing the same with Motorized Megger under the Supervision of Chartered Electrical Safety Engineer having professional registration. |
| 120 | Checking & Testing of High Voltage System Protection Relay through Primary / Secondary Current simulation of the 6.6 kV, 800A, 26.3kA Vacuum Circuit Breaker Panel of the Sub station Installation under the Supervision of Chartered Electrical Safety Engineer having National Certificate of Supervisor and submission of Test Report. |
| 121 | Supply & installation of Panel mounting LED Indication Lamp ( ON/OFF/Phase Indication ) with necessary modification suitable for LT / HT Distribution Panel Board after dismantling the old one. |
| 122 | Supplying and fixing 415V, 250 A TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make:L&T/Siemens) [D-4/4(b)]. |
| 123 | Supplying and fixing 415V, 200 A TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make:L&T/Siemens) [D-4/4(b)]. |
| 124 | Supplying and fixing 415V, 160 A TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make:L&T/Siemens ) [D-4/4(b)]. |
| 125 | Supplying and fixing 415V, 125 A TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make:L&T/Siemens ) [D-4/4(b)]. |
| 126 | Supplying and fixing 415V, 100 A TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make:L&T/Siemens) [D-4/4(b)]. |
| 127 | Supplying and fixing 415V, 63 A TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make:L&T/Siemens) [D-4/4(b)]. |
| 128 | All the testing should be done in accordance to the respective BIS & Central Electricity Authority (Measures relating to safty and Electric supply) Regulation, 2023 and all the testing report should also be approved from Directorate of Electricity of Govt. of West Bengal. Six Copies of substation drawing in A1 page & report should be submitted accordingly. |
| 129 | Dismentiling the exisisting E.I work, UPS removing from existing position and deposited to the sectional store /place as directed by EIC within compound of Town hall by co's own tools & tackeles, labours by maintaining normalcy as far as possible . |
| 130 | Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Nicco / Gloster/KEI/ RR Kabel/ Polycab ] |
| 131 | (i) 4 Core 25 Sqmm |
| 132 | (ii) 4 Core 35 Sqmm |
| 133 | (iii) 4 Core 70 Sqmm |
| 134 | (iv) 4 Core 240 Sqmm |
| 135 | Disconnection & dismantling existing old Electrical installation, Switch-board, wiring, Electrical fitting/fixtures etc with owns tools & takles incl. mending good damages as per GS and clearing/removing from the site at City Civil Court. |
| 136 | Part-B:---Facade Lighting Installation Work |
| 137 | Supply & Laying Screened DMX Signal cu Cable 5 core, 1.5sq.mm through 20mm dia PVC pipe incl. necy. Fittings as required. (matching with wall colour) on surface of the wall. (Make: Falcon/Beldon/Deepcab/Polycab) |
| 138 | Supply & Laying of power Cu cable 2.5 sq mm 4 CORE through 20mm dia PVC pipe incl. necy. Fittings as required. (matching with wall colour) on surface of the wall. (Make: Polycab/Finolex/RR Kabel) |
| 139 | Fixing only High quality LED special effect Linear wash light, incl. necessary fixing materials require. |
| 140 | Fixing only High quality LED FACADE Light light incl. necessary fixing materials require. |
| 141 | Fixing only High quality Special LED Spot light incl. necessary fixing materials require. |
| 142 | Supply of High quality LED special effect Linear wash light, Protection: IP66 outdoor, Color RGBW, Control: DMX512, Power: 90 to 120 W, Input Voltage : 12/24 V DC, External Driver, Beam Angle: 20 to 30 deg, 100% linear dimming flicker free. Channels:4/8 channels, Inbuiltpreset programmed autorun option (make: Philips/Canara Lights/ Leksa/ Bajaj/Oshram/ Unilux LLT) |
| 143 | Supply of High quality LED special effect Linear wash light, Protection: IP 66 outdoor, Color RGBW, Control: DMX512, Power: 35 to 45 W, Input Voltage : 110-250V AC, Internal Driver, Beam Angle:20 to 30 deg, 100% linear dimming flicker free. Channels:4/8 channels, Inbuiltpreset programmed autorun option (make: Philips/Canara Lights/ Leksa/ Bajaj/Oshram/ Unilux LTT) |
| 144 | Supply of High quality LED FACADE light, Protection: IP66 outdoor, Color RGBW, Control: DMX512, Power: 150 to 180 W, nput Voltage : 110-250V AC, Internal Driver,Beam Angle: 10 to 20 deg, Channels: 4/8 channels, Operational mode : DMX512. (make: Philips/Canara Lights/ Leksa/ Bajaj/Oshram/ Unilux LTT ) |
| 145 | Supply of High quality Special LED Spot light, IP65 outdoor with RGB Color, Power: 9W. Control: DMX512, External Driver (make: Philips/Canara Lights/ Leksa/ Bajaj/Oshram/ Unilux LTT ) |
| 146 | Supply & Installation of Controller DMX 512 Protocol, Live & Stand Alone systemAvailable Options: TRIGGER, CLOCK, Ethernet, Mobile App, Wifi, RS 232, NODE, ART-NET/SCAN, 2 nos. controller & Isolated (126 Dimmer, 48 Feeders, 180 Pages) DMX Signal Splitter with Amplifier 2 nos. with Signal Amplifier (make: Philips//Canara Lights/ Leksa/ Bajaj/Oshram/Unilux LTT) (It is mandatory to prepare and submit a detailed presentation drawing and report for proposed facade lighting. The presentation shall clearly explain the design concept, lighting layout, types of fixtures, technical specifications, installation methodology, safety measures, and execution schedule. This presentation must be submitted in advance and approval must be obtained from the competent authority before commencing any installation work at site.) |
| 147 | Supplying & Fixing PVC waterproof type looping cable box size 140x140x950 mm (Make Sintex) |
| 148 | Add. G.S.T.@ 18% on total of item |
| 149 | Add. LWC.@ 1% on total of item Please Enable Macros to View BoQ information |
