|
| 1 | Removal and re-fixing of existing Rolling shutters and hanger door after replacement of dammaged laths/ panels ,easing, greesing and refixing in the same opening all as specified and directed by Engr-n charge. Note: Replaced laths/panels ,hoods etc shall be measured and paid seperatly . |
| 2 | Removal and re-fixing of existing Gear operated Rolling shutters , hanger door, replacement of dammaged laths/ panels ,easing, greesing and refixing in the same opening all as specified and directed by Engr-n charge. Note: Replaced laths/panels, safety lever locks, bearings etc shall be measured and paid seperatly . |
| 3 | Taking down Rolling shutters of any description area exceeding 8.00 Sqm and not exceeding 20.00 Sqm each complete all as directed by Engr-in-charge. |
| 4 | Taking down Collapsible steel gates of any description area exceeding 3.00 Sqm and not exceeding 10.00 Sqm each complete all as directed by Engr-in-charge. |
| 5 | Removal and re-fixing of existing Collapsible steel gates after replacement of dammaged parts ,easing, greesing and refixing in the same opening all as specified and directed by Engr-n charge.Note: Replaced sections shall be measured and paid seperatly . |
| 6 | S & F in repairs 50mm bore MS pipe for suspension shafts for rolling shutter all as directed. |
| 7 | Supply only interlocking lath sections made out of cold rolled steel strips of 1.00 mm thick and 75mm width complete all as specified in SSR and as directed. |
| 8 | S&F Steel rolling shutters with thicknes of each laths of 1mm thick,with out ball bearing ,as specified,including top cover anchoring rod ,hasp and staple and one shop coat of primer;erected in position as indicated,complete:push pull or manual type complete all as specified and as directed |
| 9 | S&F gear operated Steel rolling shutters with thicknes of each laths of 1mm thick,with out ball bearing ,as specified including top cover,anchoring rod ,hasp and staple and one shop coat of primer;erected in position as indicated, complete: with bevel gear box and crank handle type complete all as specified and as directed. |
| 10 | S&F Safety lever locks mild steel with 4 levers for rolling shutters. |
| 11 | S&F Ball bearing for rolling shutters. |
| 12 | S&F of Collapsible steel gates side hung, considering of channel pickets , pivoted flat bars, top and bottom runners,handles etc, as specified,errected in position and securing runners with hold fasts and brackets, complete all as specified and directed by Engr-in- Charge |
| 13 | Dismantling plain or corrugated steel sheeting any guage thickness from Hangar Doors complete all as specified and as directed |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 15 | S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap,fixed with coach screws and washers in roofs walls etc. with grade of zine coating 275. |
| 16 | S&F 0.63mm thick plain galvanised mild steel sheeting as in ridges hips, valley gutters drip and straight flashings (length and girth as fixed) with L or J hooks or coach screws with grade of zinc coating 275 complete all as specified and as directed. |
| 17 | S&F Fibre glass reinforced translucent plain sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof ,wall etc complete all as specified and as directed |
| 18 | S&F for Mild steel ,plain black sheet of minimum 0.8mm thickness for Hoods cover for Rolling shutters;cladding to door shutters/Hangar doors ; water tank platforms etc with plain 40mm lap joints or welded/riveted seams including ,bending, turning up, mitred angles , stopped ends,outlets,etc. as required all as sprcified and directed by Engr-in Charge. |
| 19 | S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed. |
| 20 | M&L Hand rails, grills ,Gates ,half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof ,Brackets for Valley gutters ,including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 |
| 21 | S & F Rolled mild steel in Compound girders and stanchions, lattic girders,posts, staging for water tanks and the like including caps, bases,splices etx. Builtup from two or more beem or channel sections or angles with plates, including all lattice bars, stifeners,gusset plates,etc. conforming to FE-410 - W(grade E-250) quality 'A' all as directed and specified. |
| 22 | S & F Plates (Plain or Corrugated) channeis,square cut or notched (ordinary or counter sunk) forming holes with out any attachment conforming to FE-410 - W(grade E-250) quality 'A' all as directed and specified. |
| 23 | Mild steel screw bolts of length of bolt exc 5cm but n exc 10cm long, diameter of neck 11 to 15mm (machine made) with hexagonal or square heads,at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long |
| 24 | M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer. all as directed and specified. |
| 25 | M&L applying two coats of Camouflage pattern synthetic enamel painting to new surfaces steel/ CGI sheet surface exc. 10 cm width/girth over a coat of mordant solution including preparation of surfaces by removal of galvanisation if reqd, washing and cleaning,including filling with filler where reqd all as specified and directed |
| 26 | Dismantling roof treatment of any description including cement mortar bedding(But not backing)cleaning the surface by blowing,washing and rubbish off the premises complete all as directed. |
| 27 | M&L App based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt reinforcement not less than 150 gms/sqm) laid on primed surfaced application complete all as apecified and directed (Primer should be measured and paid as per Item above). |
| 28 | M&L for10 mm thick rendering on fair faces of brick works / Concrete surfaces finished even and smooth without using extra cement in cement mortar 1: 3complete all as specified and as directed |
| 29 | M&L for priming evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sq.m including cleaning the surface. |
| 30 | M&L applaying two coat of Aluminium paint over APP Membrane complete all as apecified and directed. |
| 31 | Cutting out cracks to V section in existing roofs or terracing ,cleaning out ,wetting, grouting with cement and sand slurry 1:3 all as specified and directed. |
| 32 | M&L for PCC type B0 (1:2:4) using 12.5 mm graded crushed aggregate in padding concrete and the like all as specified and directed. |
| 33 | Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed |
| 34 | M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:4 all as Specified |
| 35 | Taking down cement plaster any description on brick/stone or concrete walls, etc including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 36 | M&L for 10mm thick rendering on fair faces of brick works finished even andfair without using extra cement in cement mortar 1: 4 complete all as specified and as directed |
| 37 | Supply only Liquid water proofing copmpund in respect of the Item above. |
| 38 | M&L for 15 mm thick rendering on unfair faces of brick works finished even andfair without using extra cement in cement mortar 1:6 complete all as specified and as directed |
| 39 | M&L for preperation of new plastered wall surface of any description and applayng two coats of cement based paint over a coat of primer complete all as specified and as directed. |
| 40 | M&L for preperation of new concrete /plastered surface of any description, two coat of destemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed. |
| 41 | Demolition of cement concrete in ground floor and pavings n'exc 15cm thickness (below or above ground level complete all as specified and as directed). |
| 42 | M & L for 75 mm thick PCC 1:4:8 type D-2 using 20mm graded aggregate as sub flooring all as specified and direcetd. |
| 43 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and properembedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand |
| 44 | M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in sub floor or hard standing rough finished surface all as specified and directed |
| 45 | M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'B' in plinth protection |
| 46 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises |
| 47 | M & L for 25mm thick PCC 1:2:4, type B-0, (using 12.50 mm graded stone aggregate) as in under layer of tile flooring & finishing the surfaces rough to receive screed bed complete as specified and directed. |
| 48 | M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. |
| 49 | M&L for glazed ceramic coloured tiles in vertical surfaces of size 350X250X7/450X350X7 mm thick set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as dado/skirting and facea of side bldg over & including 10mm thick rendering in CM(1:4) complete all as specified and as directed. |
| 50 | M&L for vetrified ceramic tiles 10mm thick full body (light shade ) (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. |
| 51 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in floor, over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. |
| 52 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in skirting, over 10mm thick screed bed in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. |
| 53 | Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed |
| 54 | M&L Anodised aluminium snap grid frame work for false ceiling of grid size 605 x 605 mm including necessary hanger wires as per manufacturers specification complete all as specified |
| 55 | Providing and fixing Gypsum Board 600 x 600x10mm thick in ceiling fixed with screw as per manufacturers instructions |
| 56 | Taking down steel tubing ( 15mm bore) and connections in any position including cleaning for refixing or removal to store complete all as directed by Engr-in-charge. |
| 57 | Taking down steel tubing ( 20mm bore) and connections in any position including cleaning for refixing or removal to store complete all as directed by Engr-in-charge. |
| 58 | Supply and laying and concealed for 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc) on walls/ceiling or laying in floors complete all as specified and directed |
| 59 | S&F GI tubing of 20mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by the Engr-in-C. |
| 60 | S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) 500 Ltr capacity hoisted and fixed in position including removal of existing damaged water tanks all as specified in SSR Part I |
| 61 | S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) 1000 Ltr capacity hoisted and fixed in position including removal of existing damaged water tanks all as specified in SSR Part I |
| 62 | S & F in repairs 20 mmBrass valves ,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed |
| 63 | S&F in repairs bib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap). |
| 64 | S & F in repairs 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. |
| 65 | S&F in repairs Angle stope valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15mm bore dia of pipe. complete all as directed by Engr-in-charge. |
| 66 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 67 | S & F in repair Vitreous China wash basin, white, flat back, size 550 x 450mm including brackets all as specified and directed. |
| 68 | S&F in repairs Vitreous China Half stall Urinal, flat back, white with grating and union for discharge pipe and PTMT waste coupling with waste pipe (excluding flushing cistern, flush pipe and waste pipe) |
| 69 | S&F in repairs Vitreous china wash down water closet scouting pattern, white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device including trap set and necessary concrete complete. |
| 70 | S&F in repairs Vitreous China Sqatting pan Orissa Pattern Indian Type Size 580 x 440 with integral foot rest (excluding flushing cistern and flush pipe). Colour as desided by Engneer-in Charge. |
| 71 | S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed. |
| 72 | S&F in repairs waste pipe of polyethylene of low or high density or PVC ,32 mmdia for urinal/wash basin/Kitchen sink/ flush tank complete all as directed by Engr-in-charge. |
| 73 | S&F in repairs PVC connection pipe suitable for connecting flushing cistern and WHB etc 450mm long complete all as specified and directed. |
| 74 | S & F in repairs, waste coupling of PTMT 32mm bore for urinal / wash basin (Half or full threaded ) (Minimum Weight 45 grams) |
| 75 | S&F in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with cromium plated brass screws and cup washers complete all as specified. |
| 76 | S&F in repairs 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement |
| 77 | S&F in repairs 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors all as specified |
| 78 | S&F in repairs 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall including necessary MS flat Iron clamps of size (40 x 4mm) all as specified and as directed by the Engineer - in - Charge. |
| 79 | S&F 75 mm bore. PVC (SWR) bends |
| 80 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches |
| 81 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including necessary MS flat Iron clamps of size (40 x 4mm) all as specified and as directed by the Engineer - in - Charge. |
| 82 | S&F 110 mm PVC (SWR) bend any radius |
| 83 | S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door |
| 84 | S&F in repairs PVC syphon with rod, flushing wiser, for low level flushing cistern incl PVC handle with adjustable lever (flushing cistern kit )complete all as specified |
| 85 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge. |
| 86 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge. |
| 87 | Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed by Engr-in-charge. |
| 88 | Taking down shutters of any description area not exceeding 1 Sqm each complete all as directed by Engr-in-charge. |
| 89 | Taking down shutters of any description area not exceeding 1 Sqm each easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge. |
| 90 | Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge. |
| 91 | S&F 2nd class hard wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete(Glass shall be measured Seperately) all as directed by Engr-in-Charge. |
| 92 | S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by the Engr-in-Chage |
| 93 | Material & labour PCC (1:3:6) type B0 (using 12.5 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge. |
| 94 | S&F for 30 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats , complete all as directed by Engr-in-charge. |
| 95 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge. |
| 96 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge. |
| 97 | M&L for Powder Coated (Minimum thickness of powdercoating 50 micron) Anodised aluminium frame of standerd section for doors, windows, ventilators and partitions with double rebates including joining cleat for fixing etc. complete all as specified |
| 98 | M&L for Anodised aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured and paid seperately) complete all as specified |
| 99 | M&L for powder coating in Anodised aluminium frames of shutters of Doors ,window and ventilator openings etc as per items 10 & 11 above. complete all as specified. Note: Over all area of shutters of Doors ,window and ventilator shall be considered for payment. |
| 100 | S&F aluminium powder coated three track sliding window with two shutters of 5mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh including good quality of bearing handle, locks, PVC rubber lining including frame work etc complete all as specified. :-Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604. |
| 101 | M&L for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section including glass and stainless steel wire mesh including frame work etc complete all as specified and directed by Engineer-in-Charge. |
| 102 | M&L sheet glass 4.8mm thick ordinalry quality and glazing with aluminium beeds in square exc 0.50 sqm in each pane complete all as specified and as directed |
| 103 | M&L 9mm thick Prelaminated particle board ,exterior grade having decoratie choice lamination on both sides fixed with aluminium beadings on aluminium frame work all as specified and directed. |
| 104 | Hacking old broken glass (any thick ness, size, quality or description) from aluminium/steel/wooden frame work or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed . |
| 105 | M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 106 | S&FGalvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. |
| 107 | S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. |
| 108 | S&F in repairs Aluminium (extruded section) door closer hydraulically regulated ,designation No.3, universal type, suitable for door shutter of 851 to 1000mm in width and of weighjt between 61 to 80 Kg all as specified and as directed. |
| 109 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box ,main body with stainless steel cover,governing pivot made of brass, other plates made of mild steel heavy duty. |
| 110 | S&F in repairs 100mm Aluminium Mortice lock 2 livers vertical type complete all as specified and as directed. |
| 111 | S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed. |
| 112 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 113 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 114 | S&F Aluminium alloy anodised ,sliding door bolt 250mm with hasp,staple(bolt type) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast, aluminium alloy complete all as specified and as directed. |
| 115 | M&L preparing newly wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Please Enable Macros to View BoQ information |
