|
| 1 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 2 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth complete all as specified and directed. |
| 3 | M&L for rendering 10 mm thick in CM 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 5 | M & L for painting the new WALL surface complete all as specified and directed as follows :- (a) Surface Preparation- Preparation of newly plastered or previously untreated surfaces of walls (b) Putty application- Applying a thin layer of wall care putty to obtain smooth and even finish after rubbing with emery paper (c) Priming surface- Applying one coat of alkali resistant primer (d) Painting- Applying two coats of oil bound distemper.Note for Item No 5 to 10 & 12 to 26 (a.) The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. emulsion Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Rates quoted are deemed to be inclusive of scaffolding required and safety equipment reqired as per safety norms.(c) Stage for Preparation of surfaces shall be got approved from GE before applying the finishes.(d) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.(e) Items used for periodical works shall be premium quality. |
| 6 | M & L for painting the NEW CEILING surface complete all as specified and directed as follows :- (a) Surface Preparation- Preparation of newly plastered or previously untreated surfaces of ceiling. (b) Putty application- Applying a thin layer of wall care putty and achieve smooth surface after sanding. (c) Priming surface- Applying one coat of alkali resistant primer (d) Painting- Applying two coats of oil bound distemper. |
| 7 | M & L for painting the new wall surface white or tinted including scaffolding arrangement, trestles and ladders etc complete all as specified and directed as follows :- (a) Surface Preparation- Preparation of newly plastered or previously untreated surfaces of walls (b) Putty application- NIL (c) Priming surface- NIL (d) Painting- Applying two coats of cement base paint. |
| 8 | M&L for preparation of new plastered surfaces of walls and applying two coats of Plastic emulsion over one coat of priming paint plaster etc complete all as specified and as directed . |
| 9 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of cement base paint on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying cement base paint should be able to spray in hard to reach areas and penetration of paint on the surface complete all as specified and directed. |
| 10 | M&L for preparing surfaces of old roof tiles ( mangalore tiles / taylor tiles) of pattern as specified and applying one coat of water based exterior paint with approved make complete all as specified and directed. Note (i) Area measured flat, no addition shall be made for corrugations, offsets, etc (ii) Rates quoted are deemed to be inclusive of scaffolding required upto height of 20mtr and safety equipment required as per safety norms. |
| 11 | Raking out joints/ pointing to squared rubble masonry, coursed or uncoursed built in cement mortar complete all as specified and directed. |
| 12 | M&L for complete removal of existing treatment on wall to make the surface from dust, loose paint and loose plaster by scrapping manually/mechanically complete all as specified and directed (Note-Nails, screws if any to be removed properly before scraping) |
| 13 | M&L for complete removal of existing treatment on ceiling to make the surface from dust, loose paint and loose plaster by scrapping manually/mechanically complete all as specified and directed (Note-Nails, screws if any to be removed properly before scraping) |
| 14 | M&L for providing a thin layer of water proof cement base putty of 2mm thick over prepared old plastered / old painted wall surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed. |
| 15 | M&L for providing a thin layer of water proof cement base putty of 2mm thick over prepared old plastered / old painted ceiling surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed. |
| 16 | M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 17 | M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on ceiling with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 18 | M&L for applying two coats of oil bound distemper on new wall surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shall be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 19 | M&L for applying two coats of oil bound distemper on new ceiling surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shall be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 20 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 21 | M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. |
| 22 | M&L for preparation of old wooden surface smooth with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and applying one coat of synthetic enamel paint exc 10 cm width or girth with fully automatic airless spray machine complete all as specified and directed. |
| 23 | M&L for one coat of synthetic enamel paint with fully automatic airless spray machine including preparation of old painted surfaces of wood, wood based surfaces, AC sheet in ceiling exc 10 cm width or girth etc in ceiling incl filling of gaps between wooden planks with putty,POP complete all as specified and directed. |
| 24 | M & L for painting the old concrete surface, stone, kerb stone of any description not otherwise described for over 10 cm width or girth complete all as specified and directed as follows :- (a) Surface preparation- Preparation of old steel surfaces of any description, not otherwise described over 10 cm width or girth (b) Priming surface- NIL (c) Painting- Applying one coats of synthetic enamel paint. |
| 25 | M & L for painting the old steel surface complete all as specified and directed as follows :- (a) Surface preparation- Preparation of old steel surfaces of any description, not otherwise described over 10 cm width or girth (b) Priming surface- NIL (c) Painting- Applying one coats of synthetic enamel paint. |
| 26 | M & L for painting the old steel surface complete all as specified and directed as follows :- (a) Surface preparation- Preparation of old steel surfaces of any description, not otherwise described over 10 cm width or girth (b) Priming surface- NIL (c) Painting- Applying one coats of aluminium paint. Please Enable Macros to View BoQ information |
