|
| 1 | Preparation of old plasteres/unplastered wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white washing, complete all as specified and directed. |
| 2 | Preparation of old plasteres/unplastered ceiling surface including brooming down or steel wire wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white washing, complete all as specified and directed. |
| 3 | Preparation of old plasteres/unplastered wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of distemper oil emulsion, with sponge rollers, complete all as specified and directed.Note : - 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement. |
| 4 | M&L for applying a coat of 2 mm thick layer wall putti over wall ,complete all as specified and directed. |
| 5 | M&L for complete removal of existing treatment and preparation old wall surface and applying two coats of distemper oil emulsion over a coat of primer, with sponge rollers, over and including wall care putty of 2 mm thickness, complete all as specified and directed.Note : - 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement. |
| 6 | Preparation of old plasteres/unplastered wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint upto 15m height, complete all as specified and directed by Engineer in Charge.Note : - 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement. |
| 7 | Preparation of old painted wooden surfaces of any description not otherwise described over 10 cms width or girth including preparation of surface and applying one coat of synthetic enamel paint, complete all as specified and directed.Note : - 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement. |
| 8 | Preparation of old painted wood or wood based surfaces of any description not otherwise described and surface not exc 10 cms width or girth including preparation of surface and applying one coat of synthetic enamel paint on wooden surface, complete all as specified and directed.Note : - 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement. |
| 9 | Preparation of old painted steel surfaces of doors/windows/railings/CGI sheet over roof or any description not otherwise described over 10 cms width or girth including preparation of surface and applying one coat of synthetic enamel paint, complete all as specified and directed.Note : - 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement. |
| 10 | Preparing old wood surface for Varnishing incl cleaning and stoping and applying one coat of liquid transparent wood filler and finishing with a varnish coat complete all as specified and directed. |
| 11 | Preparing surface of tiles for Varnishing incl cleaning and stoping and applying one coat of varnish coat complete all as specified and directed. |
| 12 | Material & Labour for Preparation old surfaces of wall by removing existing treatment by scrapping, brushing, etc including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and filling holes, dents, cracks with mixture of white cement and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming a coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.Note- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement. |
| 13 | Preparing of new plastered surface and applying two coat cement base paint on newly plastered surfaces, complete all as specified and directed. |
| 14 | Preparing of newly plastered surface of wall and applying two coat oil bound distemper over a coat of primer over and incl 2mm thick wall care putty, complete all as specified and directed. |
| 15 | M&L preparation of new plastered surfaces of walls and applying two coats of white wash complete all as specified and directed. |
| 16 | Preparing of new plastered ceiling surface and applying two coat white wash on newly plastered surfaces, complete all as specified and directed. |
| 17 | Writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high on walls complete all as specified and directed. incl obliterating old writing of any description with paint to match existing work |
| 18 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed. |
| 19 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each complete all as specified and directed. |
| 20 | Taking down door shutters of any desc exc 1 Sqm but n.exc. 2 Sqm each complete all as specified and directed. |
| 21 | M&L rendering 15mm thick plaster on brick masonry/ stone masonry or other than fair faces of brick wall in cement mortar 1:6 finished even and fair without using extra cement, including taking down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering, complete all as specified and directed.Note: WPC compound may be used as per required ground condition which is to be measured and paid seperately |
| 22 | M&L rendering 15mm thick plaster on brick masonry/ stone masonry or other than fair faces of brick wall in cement mortar 1:4 finished even and fair, including taking down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering, complete all as specified and directed. |
| 23 | M&L rendering 5mm thick plaster on ceiling in cement mortar 1:3 finished even and fair without using extra cement, including taking down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering complete all as specified and directed. |
| 24 | M&L rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas, ceiling and roof projection etc incl taking out praised off plaster/concrete and making good to cracked RCC surface in true line/shape by providing PCC 1:2:4 type B1 using 20mm graded stone aggregate incl necessary formwork to thickness required at ground floor and first floor etc. finish surface even and smooth without using extra cement, including taking down down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering, ccomplete all as specified and directed. |
| 25 | M&L brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified and directed by Engineer in Charge., incl demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles, complete all as specified and directed. |
| 26 | Dismantling timber scantlings like fillets,rails, posts, rafters, purlins, etc. under 40Sq.cm in section, in any position complete all as specified and directed. |
| 27 | S&F for Non asbestos fibre cement building boards 4mm thick E-board (Classic) false ceiling of size 610mm x 610mm fixed with GI snap grid frame work of same size as GI tee of size 25x25x1.50mm as main runner ,25x25x1.25mm thick GI tee as cross runner and GI angle of size 25x25x1.25 mm at the perimeter, including 4mm GI adjustable suspender of required length, including dismantling of old ceiling boards, complete all as specified and directed. |
| 28 | S&F for fixed in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 29 | S&F for Hollow PVC Wall Lining consisting of 5mm thick wood grain (as approved by GE/ Engr in Charge) printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing (or without PVC frame work), fixed in repair complete all as specified and directed. |
| 30 | M&L 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate laid in alternative bays area not exc 2 sqm each as in plinth protection laid to slope of 1 in 12 including finishing the surface even and smooth with using extra cement including Demolition of cement concrete unreinforced. complete all as specified and directed. |
| 31 | M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry, pointed with white or coloured cement to match the colour of tiles, incl dismantling. complete all as specified and directed. |
| 32 | M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm cut to size as required as in skirting/dado over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles incl dismantling complete all as specified and directed. |
| 33 | M&L vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layer in CM 1:4, Incl dismantling complete all as specified and directed. |
| 34 | M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10 mm thick backing coat in CM 1:4, Incl dismantling complete all as specified and directed. |
| 35 | M&L Glazed ceramic any shade tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300mm/7mm/ 600x300x 7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, Incl dismantling complete all as specified and directed. |
| 36 | S&F pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed. |
| 37 | S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer,complete all as specified and directed. |
| 38 | M&L 35mm thick 2nd class hard wood plain framed panel shutter factory made (two board with commercial veneers on both faces. The size of rail and style as per IS-1003 (Part-I) kiln seasoned and chemically treated complete all as specified and directed. |
| 39 | S&F 35mm thick IInd class hard wood glazed and skeleton shutter open rebated prepared to receive glass gauge etc with sash bars for securing glass, gauge etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and directed. |
| 40 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 41 | S & F Box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire and glass panes shall be measured and paid separately ) with side hung shutters with steel handle and steel peg stay dovetailed ot welded incl 2 Nos tower bolts 150mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to flat iron 40x 5mm frame work, including other fittings hinges, handles tarred hold fasts PCC blocks etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 42 | S&F galvanised steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 43 | S&F , solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening complete all as specified and directed. |
| 44 | S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail panel of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed. |
| 45 | S&F in repairs 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 46 | S&F in repairs 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 47 | S&F in repairs 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 48 | S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 49 | S&F in repairs 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) , and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 50 | S&F in repairs 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 51 | M&L preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide,zinc chrome primer complete all as specified and directed. |
| 52 | M&L preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 53 | S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type, anodised Each complete all as specified and directed. |
| 54 | S&F in repairs rolled mild steel bands, straps,supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks(stays),heavy,for large gates,hook and pintle hinges,large hasps and staples,chains,hand made sliding bolts,clamps,hold fasts,wall ties,hooks for hanging fans,plain angle cleats for securing purlines to wooden trusses conform to Fe-290 Gde E-165 complete all as specified and directed. |
| 55 | M&L plain cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate cast in situ in back fill of chowkhats and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified and directed. |
| 56 | M&L plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, sills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones (fixing hold fasts), bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified and directed. |
| 57 | Dismanting boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 58 | Prelaminated particle board, interior grade, 18/19 mm prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 59 | M&L 6mm thick external teak wood lipping to block board or veneered particle board 18/19mm thick fixed with nails complete as specified and directed. |
| 60 | S&F in repairs 75 mm size, hasp and staple safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 61 | S&F in repairs mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 40mm, complete all as specified and directed. |
| 62 | S& F in repairs rotational moulded polyethylene water storage tank white in colour 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, complete all as specified and directed. |
| 63 | S & F in repairs rotational moulded polyethylene water storage tank white in colour 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position with PVC float ball valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, complete all as specified and directed. |
| 64 | Disconnecting existing tanks, 250/ 500 litres capacity, setting aside (or lowering if required) for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc, and hoisting if required reconnecting and re-fixing in position and making connections with existing water supply line, complete all as specified and directed. |
| 65 | S&F in repair vitreous china squatting pan water closet, orissa pattern, size 580 x 440 mm white/coloured as approved with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, provn of lime concrete and jointing to flush pipe, complete all as specified and directed. |
| 66 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white/coloured as approved (excluding fixing bolts, flushing cistern and flush pipe) including Seat and cover for pedestal pan complete all as specified and directed. |
| 67 | S&F as in repair CP jet spray hygienic spray jet for 15mm bore dia fittings 1 to 1.5m long tube acrylic type complete all as specified and directed. |
| 68 | S&F in repairs 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, white / coloured as approved inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with PTMT coupling nuts and PVC washer at both ends, complete all as specified and directed |
| 69 | S&F in repairs vitreous china, white/coloured as approved, flat back wash hand basin of size 550 mm x 400 mm including brass CP waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15 mm dia, 450 mm long piece, CP nuts and washers at both ends ,complete all as specified and directed. |
| 70 | S&F in repairs Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flushpipe and waste pipe) complete all as specified and directed. |
| 71 | S&F 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 Kgf/sq.cm for low level cistern and waste pipe for sink, washbasin complete all as specified and directed |
| 72 | S&F in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down with high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified and directed. |
| 73 | S&F in repairs fancy type, bib tap long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed. |
| 74 | S&F, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed. |
| 75 | S&F in repairs stop valve/angle valve cast copper alloy, fancy type,chromium plated, screwed down, high pressure, with quater turn flange, screwed both ends for 15 mm bore iron pipe or for union complete all as specified and directed. |
| 76 | S&F in repairs PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed. |
| 77 | S&F in repairs 32/ 40mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 78 | S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 79 | S&F center hole Brass chromium plated wall mixture for mixing hot and cold water , screwed down for iron pipe for 15mm dia bore pipe., complete all as specified and directed. |
| 80 | S&F Brass chromium plated Sink mixture for mixing hot and cold water for sink, screwed down for iron pipe for 15mm dia bore pipe., complete all as specified and directed. |
| 81 | S&F in repair chromium plated central hole basin mixer for WHB single lever without popup waste system with 450 mm long braided hoses complete all as specified and directed. |
| 82 | S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestal pattern WC complete all as specified and directed. |
| 83 | S&F in repair plastic Anglo Indian water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestal pattern WC complete all as specified and directed. |
| 84 | S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. |
| 85 | S & f in repair Chromium plated shower roses of size 125 mm with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 86 | Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipe including all fittings ,heads shoes, bends etc including removal to store ,internal dia of pipe in 75MM/110mm complete all as specified and directed. |
| 87 | S& F in repair PVC SWR pipe 110mm bore single socketed, in any length with rubber ring joints, fixed to walls including fixing clamps etc complete all as specified and directed |
| 88 | S& F in repair PVC SWR pipe 110mm bore single socketed, in any length with rubber ring joints, as in floors, trenches complete all as specified and directed |
| 89 | S& F in repair PVC SWR pipe 75mm bore single socketed, in any length with rubber ring joints, fixed to walls including fixing clamps etc complete all as specified and directed |
| 90 | S& F in repair PVC SWR pipe 75mm bore single socketed, in any length with rubber ring joints, as in floors, trenches complete all as specified and directed |
| 91 | S&F in repairs PVC (SWR) junction single TEE equal or unequal 75mm bore with rubber ring door complete all as specified and directed |
| 92 | S&F in repairs PVC (SWR) junction single TEE equal or unequal 110mm bore with access door complete all as specified and directed |
| 93 | S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent bore complete all as specified and directed. |
| 94 | S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent 100/110 mm bore complete all as specified and directed. |
| 95 | S&F in repairs PVC (SWR) bends with access door of any radius 75mm bore dia complete all as specified and directed. |
| 96 | S&F in repairs PVC (SWR) bends with access door of any radius 100/ 110mm bore dia complete all as specified and directed. |
| 97 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed. |
| 98 | S&F in repairs stainless steel soap dish approximate size 160mm x 160mm x 90mm fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 99 | S&F in repairs Towel Rail 600mm long 20mm dia, D type brass chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 170gms) complete all as specified and directed. |
| 100 | S&F in repairs steel water tubing, 15 mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc incl taking down old steel tubing, complete all as specified and directed. |
| 101 | Fixing only steel water tubing, 15 mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed.Note: The GI tubing obtained from taking down used in this item. |
| 102 | S&F in repairs steel water tubing, 20 mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for floor concealed work if required etc incl taking down old steel tubing, .complete all as specified and directed.Note: The GI tubing obtained from taking down used in this item. |
| 103 | Fixing only steel water tubing, 20 mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work if required etc, complete all as specified and directed.Note: The GI tubing obtained from taking down used in this item. |
| 104 | S&F 0.63mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers in roofs, walls etc including taking down old sheets with grade of zinc coating 275 complete all as specified and directed |
| 105 | S&F 0.80 mm in thickness plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275, including taking down old sheets complete all as specified and directed. |
| 106 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including taking down old sheets complete all as specified and directed. |
| 107 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including taking down old sheets complete all as specified and directed. |
| 108 | S&F in repairs anodised aluminium frame/chowkhat for doors, windows, ventilators with minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 109 | S&F Powder coated Anodised aluminium door shutters ( powder coating of any colour and thickness not less than 50 micron) aluminium section weighting 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing two number of aluminium handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21,100mm long, anodised aluminium snap beading screws, anodised aluminium fittings complete all as specified and directed. |
| 110 | S&F Powder coated Anodised aluminium window and ventilator shutters ( power coating of any colour and thickness not less than 50 micron) side hung type without sash bars, aluminium section weighting 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing one number of aluminium handle of suitable size for each shutter, one peg stays 150mm long, 02 numbers hinges type B-21,100mm long, anodised aluminium snap beading screws, anodised aluminium fittings complete all as specified and directed. |
| 111 | Taking down and refixing the same aluminium door shutter after resecuring/ readjusted to cleats, glazing clips, rubber neoprene packing, handle 2 Nos in Each door, hinges, anodised aluminium snap biding, screw etc. and renew unserviceable items such as fittings, sections, glass, Solid PVC sheets etc complete all as specified and directed. |
| 112 | S&F in repairs 4 mm thick sheet glass ordinary quality, exceeding 0.50 square metre in each pane fixed with rubber gasket and aluminium powder coated snap beading etc.complete all as specified and directed. |
| 113 | Hacking out old broken glass from wood or steel frame or frames of any description complete all as specified and directed. |
| 114 | S&F 3 mm thick transparent glass ordinary quality as in glazing not exc 0.50 sqm each pane fixed in wood or steel frames with oil putty or wooden beads or self tapping screw complete all as specified and directed. |
| 115 | S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc. 0.5 sq. m in each pane complete all as specified and directed. |
| 116 | S&F in repairs brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed. |
| 117 | S&F brass 4 Levers mortice lock, vertical type of size 100mm, complete all as specified and directed. |
| 118 | M&L in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 119 | S&F aluminium (extruded section body) door closer hydraulically regulated designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 120 | S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 121 | M&L for Rolled sections (like beams, channels, angles, flats or other type of sections) Fe-410-W(Gde- E-250) quality- B as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc., complete all as specified and directed. |
| 122 | PVC coated mild steel conduit pipe 25mm bore (Drapery rod) with a pair of PVC coated MS clamps to hold drapery rod and decorative attachment at one or both ends of drapery rod, fixed to opening of door / windows, (Each opening n. exc. 1.50 mtr. contained with a pair of clamps and a pair of side ornamental attachments), complete all as specified and directed. |
| 123 | S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 124 | S&F Stainless steel plate rack of size 600mmx750 mm of selected quality complete all as specified and directed. |
| 125 | Preparing surface of sunken slab in toilet flooring and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall, including, laying and testing of bituminous coating system based on bituminous emulsion, including application of one coat of primer and laying of app membrane as per manufacturer specification in sunken portion with and including sunken floor shall be filled with brick concrete 1:4:8 as per existing thickness, a pipe of dia 40mm 600mm long GI spout incl. fitting in floor and incl demolition of floorcomplete all as specified and directed. |
| 126 | Supply only liquid water proofing compound complete all as specified and directed. |
| 127 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 128 | S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, spices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. complete all as specified and directed. (Note:- Demolition of old Brick stagging.) |
| 129 | S&F for Steel work in tubular hollow section trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I S 1161-1979 grade St.-240 complete all as specified and directed. |
| 130 | M & L for granite (of any size) tile 18 to 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over 20mm thick screed bed of CM 1:6 including cutting and polishing complete all as specified and directed. |
| 131 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed |
| 132 | M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as in Sub base complete all as specified & directed |
| 133 | M&L for laying Chequered cement concrete tiles 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floorswith grey cement and pigment over 20mm screed bed in CM 1:6 complete allas specified and directed. |
| 134 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete and including demolition of existing tiles and removal outside the MoD land complete all as specified and as directed. |
| 135 | S&F stainless steel peg set of Six pegs, fixed/welded/soldered on stainless steel base plate of size 300x30x2.5 mm and fixed with stainless steel screws, rowel plugs as per the sample approved by the Engineer-in-charge complete all as specified and directed. |
| 136 | S&F Auto closing hinges 35 mm of 0 degree crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repair complete all as specified and directed. |
| 137 | S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs fixed in repair complete all as specified and directed. |
| 138 | Supply and fix PVC bathroom cabinet of size 50cmx41cmx11cm with hinged door an locking arrangement with built in shelves and looking mirror fixed in cabinet door and fixed to wall as per manufacturers instruction as in repairs complete all as specified and directed. |
| 139 | S&F in repair glass shelf assembly consisting of 5.5 mm thick glass sheet glass self 12 Cm wide with CP bracket guard and railing 60 Cm long complete all as specified and directed. |
| 140 | S & F 32 mm pvc waste pipe to WHB, sink etc. complete all as specified and directed. |
| 141 | Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified and directed. |
| 142 | M&L for roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust & Brushing neat cement slurry with 3.0kg of cement per sqm etc complete all as specified and directed. |
| 143 | M&L for 25 mm thick PCC 1:2:4, type B-0 (Using 12.50 mm graded crushed stone aggregate) as in padding on roof etc and finished even with using extra cement, complete all as specified and directed. |
| 144 | S&F High performance component brushable elastomeric polyurea waterproofing coating cold applied with brush/roller smartcare damp proof xtreme / Weather pro top shield elastomeric/ ultraseal BA or approved equivalent on any horizontal or vertical surface liquid membrane with white in color with an elongation of Min 200% vertical & Min 300% horizontal surfaces and tensile strength of 1.5 N/mm2 @DFT 1mm as per ASTM D 2370, Min 55 % Solid Content, shore A Hardness of min 70, system includes final base preparation using polymer primer/ Epoxy application @ 200-250gms/sqm, depending upon the surface porosity and crack bridging ability 3.50mm horizontal & 1.22mm vertical applying Smartcare Damp proof xtreme / Home Shield Ultraseal BA or approved equivalent in two coats at not less than 0.93Sqm/ltr in horizontal & 2.79-3.25Sqm/ltr in vertical surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
