|
| 1 | M & L for Surface dressing not exceeding 15 cm deep getting out in soft/ loose soil complete all as specified and directed. |
| 2 | M & L for Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed in all type of soil complete all as specified and directed. |
| 3 | M & L for Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all type of soil complete all as specified and directed. |
| 4 | M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) (Column) complete all as specified and directed. |
| 5 | M & L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area (Masonry Foundation) complete all as specified and directed. |
| 6 | M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) (Masonry Foundation) complete all as specified and directed. |
| 7 | M & L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface (Floor) complete all as specified and directed. |
| 8 | M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface 300 mm c/c (Area of the sub structure in contact with backfill to be measured) (along Perimeter of Floor) complete all as specified and directed. |
| 9 | M & L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 10 | M & L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 11 | M & L for Cement concrete type B2 (1:2:4) 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 12 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Soft/loose Soil complete all as specified and directed. |
| 13 | Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 14 | M & L for RCC M-30 (Design Mix) using 20 mm graded aggregate for Foundation, including rafts as Mass Concrete complete all as specified and directed. |
| 15 | M & L for Form work to sides of concrete foundations, footings, bases of column etc, rough finished surfaces of concrete measured flat complete all as specified and directed. |
| 16 | M & L for Form work for rough finished surfaces of concrete measured flat to sides of columns finished rough (Upto Plinth Top) complete all as specified and directed. |
| 17 | M & L for Precast cement concrete block masonry with solid blocks, exceeding 10 cm in width, type C1 (1:3:6) 20mm graded aggregate setting in CM (1:6) complete all as specified and directed. |
| 18 | M & L for RCC M-30 (Design Mix) using 20mm graded aggregate for Column from Plinth Top to Ground Floor Lintel Level complete all as specified and directed. |
| 19 | M & L for providing precast cement concrete solid building blocks or slabs 10 cm thick (with plain or interlocking joints as directed) type C1 (1:3:6) 20mm graded aggregate, built in in CM (1:4) in walls, complete all as specified and directed. |
| 20 | M & L for Form work to sides and soffits of ground floor Lintel Beam, rough finished surfaces of concrete measured flat complete all as specified and directed. |
| 21 | M & L for RCC M-30 (Design Mix) using 20mm graded aggregate for G.F Chajja complete all as specified and directed. |
| 22 | M & L for Form work to GF chajjas, rough finished surfaces of concrete measured flat complete all as specified and directed. |
| 23 | M & L to mild steel TMT bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for partition wall complete all as specified and directed. |
| 24 | M & L RCC M-30 (Design Mix) using 20mm graded aggregate for Roof Slab, Coping complete all as specified and directed. |
| 25 | M & L for Form work to Roof Slabs for rough finished surfaces of concrete measured flat for Roof Slab complete all as specified and directed. |
| 26 | M & L RCC M-30 (Design Mix) using 20mm graded aggregate for Parapet Wall & Fascias complete all as specified and directed. |
| 27 | M & L for Form work to Fascias for rough finished surfaces of concrete measured flat for Fascisa. Complete all as specified and directed. |
| 28 | M & L for Form work for Parapet Wall rough finished surfaces of concrete measured flat complete all as specified and directed |
| 29 | M & L RCC M-30 (Design Mix) using 20mm graded aggregate for Staircase excluding landing.Complete all as specified and directed |
| 30 | M & L for Form work to staircases with sloping or steppet soffits including risers and stringers (excluding landing), rough finished surfaces of concrete measured flat complete all as specified and directed. |
| 31 | M & L for TMT steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or resecuring with clips complete all as specified and directed. |
| 32 | Ditto as item no. 31, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 33 | M & L for 10mm thick Cement Plaster in CM (1:6) finished even & smooth without using extra cement complete all as specified and directed. |
| 34 | M & L for 5mm thick Cement Plaster in CM (1:3 ) finished even & smooth without using extra cement complete all as specified and directed. |
| 35 | M & L for 15mm thick Cement Plaster in Two Layers, 10mm thick in CM (1:6) over 5mm thick in CM (1:4) finished even & smooth without using extra cement complete all as specified and directed. |
| 36 | Supply only Integral Water Proofing Compound complete all as specified and directed. |
| 37 | S & F factory made 100% solid WPC (Wood Polymer Composite)- Door Frame 100 mm x 50 mm single rebated, made from wood polymer composite ( single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), calcium carbonate and natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter joint after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/cbm, having good screw holding capacity ( Screw Withdrawal strenght of ( min. 990 N0, minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of frame of class A category with property of being termite / borer proof , water / moisture proof & fore retardent & Fixed in position with SS Dash Fasteners / Hold fast of reuired dia and lenght , all as per specification drawing as directed by the engineer-in-charge, material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. |
| 38 | S&F factory made 35 mm thick 100% solid WPC ( Wood Polymer Composite)- Laminated Flush Door Shutter of required size comparising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), calcium carbonate and natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives, made from Extrusion process WPC foam sheet single Extruded ( inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity ( screw withdrawal strenght of 50 N (Face) & 1100 N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of frame of class A category with property of being termite / borer proof , water / moisture proof & fore retardent. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of vshutter and fixing stainless steel butt hinges (will be paid seperately ) of required size with necessary full body threaded star headed counter sunk SS screw. all as per specification drawing as directed by the engineer-in-charge, material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. |
| 39 | S & F Powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 40 | S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 41 | S & F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 42 | S & F 4mm thick Figured glass, pin head type and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and directed. |
| 43 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 44 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 45 | S & F Brass Door Butt Hinges fancy type 150 mm size complete all as specified and directed. |
| 46 | S & F Brass Door barrel tower bolts fancy type of extruded section 200 mm size complete all as specified and directed. |
| 47 | S & F Brass Door handle fancy type150 mm size complete all as specified and directed. |
| 48 | S & F Brass Door sliding door bolt 300 mm long fancy type, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 49 | S & F 20mm dia curtain rods anodised aluminium alloy, power coated with fixing and including brackets, stops, rollers etc complete all as specified and directed. |
| 50 | S&F 18 mm thick WPC shutter termite resistant and water proof, both side prelaminated wooden plywood one side with decorative choice lamination, and other side plain white lamination total thickness not more than 22 mm thick, as in cup board shutters & frame , including piano hinges, wardrobe/ finch lock & PVC lipping on all exposed edges of same texture and shade, with complete all as specified. Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) Thickness of laminated not less than 1mm for inside plain white type & 1.5 mm for outer decorative type. The laminate shall be fixed to base with approved adhesive as per manufacturer's instructions and machine pressed to ensure proper bonding with base ply and avoid air pockets. 3) Frame to be fixed to walls, soffits & base of cupboard with fasterners complete all as specified and directed. |
| 51 | S & F Continuous (piano) hinges, of brass, bright finish or electrogalvanised and avg width 40 mm for fixing of shutters complete all as specified and directed. |
| 52 | S & F 125mm hasp & Staple, safty type, aluminium anodised with mild steel hinge pin including bolts to hinge plate and fixing with screw complete all as specified and directed. |
| 53 | S & F 50 mm magnetic catches and fixed complete all as specified and directed. |
| 54 | S & F MS work such as Bands, Straps, Hold fast, Clamps, Hooks & similar Fe-410-O or Fe-310-O complete all as specified and directed. |
| 55 | M & L for preparation of new or previously untreated surface of wall of any description over 10cm girth or width and applying one coat of plastic emulsion paint over one coat of priming paints plaster coat and 3mm thick wall care putty giving a textured finish for interior complete all as specified and directed. |
| 56 | M & L for preparing new surfaces and applying one coat of alkali resistant priming paint over two Coats of oil bound distemper emulsion on ceiling complete all as specified and directed. |
| 57 | M&L including preparation of new surface of wall by filling crack fill paste of Asian Paints or equivalent make and making good surface by applying two coat of white birla / JK wall care putty in complete area and smoothen surface by sand paper and applying two coat of first quality premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay technology, excellent dirt pick up resistance of Asian Paints Ltd or equivalent of other approved make with low VOC less than 50gm/litre as per the LEEDS specification complete all as specified and directed. Make:-Berger Weather coat glow/ Asian Paints Apex Ultima |
| 58 | M & L for preparation of new surfaces and applying two Coat of Synthetic Enamel Paint Over One Coat of pink primer for wooden surfaces complete all as specified and directed. |
| 59 | M & L for Hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. |
| 60 | M & L for 75mm thick Cement concrete Type D-2, (1:4:8) 40mm graded aggregate as in sub floors, sub bases, floors and pavings etc complete all as specified and directed. |
| 61 | M&L for GREs tough HD polished Double charged vitrified tiles 10 to 11mm (light shade of square/ rectangular), area of each tiles not exceeding 0.72 sqm in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) laying floor finished complete all as specified and directed. |
| 62 | M&L for GREs tough HD polished Double charged vitrified tiles10 to 11mm (light shade of square/ rectangular) polished, area of each tiles not exc 0.36 sqm in walls skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick rendering in CM 1:4 on fair faces of brick/concrete surfaces as in backing coat for tiles complete all as specified and directed. |
| 63 | M&L for Non-skid ceramic tiles 600X600 (Coloured) 7 to 8mm thick rectangular area of each tiles in floors etc,.set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:4) laying floor finished complete all as specified and directed. |
| 64 | M & L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 65 | M & L for 18-20 mm thick Mirror Polished Italian Marble Flooring complete all as specified and directed. |
| 66 | M & L for Bedding layer of mortar 20 mm thick in CM (1:4) for laying floor finishes complete all as specified and directed. |
| 67 | M&L for glazed ceramic coloured tiles 600x300mmx7mm thick in vertical surfaces such as skirting/dado and risers to steps and including over 10mm thick rendering in CM 1:3 on fair faces of brick/concrete surfaces as in backing coat for tiles. etc, all as specified and directed. |
| 68 | M & L for 10mm thick screed bed CM (1:3) for laying floor finishes complete all as specified and directed. |
| 69 | M & Lfor Mirror Polished Italian Marble 18 to 20 mm thick in set and jointed in cement mortaar Skirting complete all as specified and directed. |
| 70 | M & L for 75mm thick Plinth Protection PCC (1:3:6) type C-2 using 20mm graded aggregate (0.75 m wide) and making joints complete all as specified and directed. |
| 71 | M&L for application of Roof treatment including surface preparation opening of cracks and application of cement based coat as per manufacturers instruction having min service life of 10 years warranty and complete all as specified & directed by Engr -in-charge. Make ;- Themacool or Dr Fixit or Asian Paint or techno commercial equivalent as approved by GE. |
| 72 | M & L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed, set jointed and pointed in neat cement slurry with grey cement and no pigment in floors, and cut and polished complete all as specified and directed. |
| 73 | M & L Bedding layer of mortar 20 mm thick CM (1:4) for laying floor finishes complete all as specified and directed. |
| 74 | Supply Only Bituminous Paint complete all as specified and directed. |
| 75 | S & F Rimless Single piece WC with UF soft close seat cover, Hinges, Dual flush cistern fitting, fixing accessories and accessories set, size 385*720*710 mm, S Trap 300 mm including making good to floor complete all as specified and directed. Make Jaguar cat no ONS-WHT-10853S300UFSM or equivalent make as approved by GE. |
| 76 | S & F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 77 | S&F Toilet paper holder with shelf including bracket with complete fittings complete all as specified and directed. MAKE : Jaguar CAT no AKP-CHR-35757P or equivalent make as approved by GE. |
| 78 | S & F fancy type sheet glass shelf assembly with CP bracket gaurd and railling 60 cm long complete all as specified and directed. Make Jaguar Cat no CPA-CHR-1171 or equivalent make as approved by GE. |
| 79 | S&F fancy type glass corner with CP railing fixed with screws fancy type complete all as specified and directed. Make: Jaguar Cat no CPA-CHR-1173 or equivalent make as approved by GE. |
| 80 | S&F fancy type stainless steel towel rack size 600mm long without lower hanger but with 3 hooks including brass bracket complete all as specified and directed. Make Jaguar cat no CPA-CHR-1181FH or equivalent make as approved by GE. |
| 81 | S&F counter sunk wash hand basin, vitreous china white of size 700x 435x135mm, 32mm waste fitting and waste pipe of 32 mm bore, brass, chromium plated for glazed ware wash basin and 15mm dia pillar taps chromium plated fancy type etc complete all as specified and directed. Make Jaguar cat no ARS-WHT-39903 or equivalent make as approved by GE. |
| 82 | S & F C.P. Rubber or vulcanite plug (waste) with rings and fitting and fixing complete all as specified and directed. |
| 83 | S & F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 84 | S&F swivel mirror 630x445mm rectangular shape complete all as specfied and directed. MAKE : Jaguar,CAT no AKP-CHR-35795 or equivalent make as approved by GE. |
| 85 | S&F brass chromium plated towel rail 20mm dia 'D' type 600mm long between flanges, of with and including chromium plated brass screws etc complete all as specified and directed. Make Jaguar cat no CPA-CHR-1111 or equivalent make as approved by GE. |
| 86 | S & F Brass CP overhead Shower with 200 mm Dia and all as specified and directed. Make Jaguar Cat no OHS 1613 or equivalent as approved by GE. |
| 87 | S&F Brass chromium plated moca wall mixer 3 in 1 fusion , 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed MAKE : Jaguar CAT no FUS-CHR-29281 or equivalent makeas approved by GE. |
| 88 | S&F soap dish holder including bracket with complete fittings all as specified and directed. MAKE : Jaguar,CAT no AKP-CHR-35731P or equivalent make as approved by GE. |
| 89 | S & F Brass CP Hand Shower with 1.2 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed. Make Jaguar cat no HSH-1371 or equivalent make as approved by GE. |
| 90 | S&F CP concealed stop cock 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make Jaguar cat no FUS-CHR-29083K or equivalent make as approved by GE. |
| 91 | S&F CP angle cock 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make Jaguar cat no FUS-CHR-29053 or equivalent make as approved by GE. |
| 92 | S&F fancy type chromium plated brass two way Angle valve suitable for 15mm bore pipe complete all as specified and directed. MAKE : Jaguar,CAT no APR-101067 or equivalent make as approved by GE. |
| 93 | S&F fancy type chromium plated brass two way Bip cock suitable for 15mm bore pipe complete all as specified and directed. MAKE : Jaguar,CAT no FUS-CHR-29041 or equivalent make as approved by GE. |
| 94 | S & F ISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. MAKE : Jaguar,CAT no FUS-CHR-29023B or equivalent make as approved by GE. |
| 95 | S & F Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed.MAKE : Jaguar,CAT no ALD-CHR-565 or equivalent make as approved by GE. |
| 96 | S&F CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed. Make Jaquar or as approved by GE. MAKE : Jaguar,CAT no FUS-CHR-29037 or equivalent make as approved by GE. |
| 97 | S&F 15mm bore U-PVC pipes of pressure rating 10kg/cm2 fixed complete to walls, ceiling or in floor etc. with all fittings complete all as specified and directed. |
| 98 | S&F 20mm bore U-PVC pipes of pressure rating 10kg/cm2 fixed complete to walls, ceiling or in floor etc. with all fittings complete all as specified and directed. |
| 99 | S&F 25mm bore U- PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings completed all as specifiec and directed. |
| 100 | S&F gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and directed. |
| 101 | S & F Rotational moulded polyethylene water storage tanks 1000 litre (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. |
| 102 | S & F 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 103 | S & F Cast iron pipes with flangedends/ verticaliy cast, Class A, in any length laid on walls 150mm complete all as specified and directed. |
| 104 | S & F Cast iron pipes with flanged ends/ verticaliy cast, Class A, in any length laid in trenches or in floors 150mm Complete all as specified and directed. |
| 105 | S & F Cast iron (SWR) vent cowl suitable for 150mm complete all as specified and directed. |
| 106 | S & F 80mm Cast iron pipes with flanged ends/ verticaliy cast, Class A, in any length laid on walls complete all as specified and directed. |
| 107 | M & L Cast Iron (SWR) gully trap 125/150 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 108 | S & F 80mm Cast iron pipes with flanged ends/ verticaliy cast, Class A, in any length laid in trenches or in floors complete all as specified and directed. |
| 109 | S & F 110mm bore PVC (SWR) Rainwater pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 110 | S & F110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 111 | S & F CI (SWR) bends any radius 75mm with access door complete all as specified and directed. |
| 112 | M & L for Site Clearance in soft/loose soil complete all as specified and directed. |
| 113 | S & F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 114 | S&F 12 mm thick toughned glass door with powder coated aluminium frame hollow sections members of size 100x44x1.48mm / 150x44x1.44mm thick with rawl plug including SS patch lock bottom type, Decorative long handle up to 30 inch etc with double action floor spring in each shutter and provide locking system. complete as requirement of site with suitable height and any type of etching designed on tougned glass, off cuts complete with finishing wall in CM (1:4), designed approved by GE complete all as specified and directed. |
| 115 | S&F 12 mm thick toughned glass partiion with powder coated aluminium frame hollow sections members of size 63.50mmx38mmx1.48mm with any type of etching designed on tougned glass, off cuts complete as requirement of site with arrangement for suitable height with off cuts complete all as specified and directed. |
| 116 | S&F Godrej Mortise Lock with Handle Lock (14.5L x 5.4W Centimeters) Set for Main & Bedroom Door|HDH 10 Rossette Home Decor Handle|Matte Antique Brass gold Finish|9 Inch Lockbody|70 mm 1CK Cylinder - Knob from Inside & 3 Keys complete all as specified and directed. |
| 117 | S&F Godrej Cylindrical Lock| for Toilet and Bathroom doors with 3 Keys ,for Left & Right Handed & Inside/Outside Opening | Brass Finish size 200 x 80 x 150 Centimeters complete all as specified and directed. |
| 118 | S&F for Stainless steel railing special alloy (grade 304) pipe 1.50 mm thick and any dia of pipe, incl necessary cutting, notching organ welding , grinding and drlling counter sunk holes and bending required shape by mechanical means in factory as per requirement withou forming wrinkles and butting polishing complete all as specified and directed. |
| 119 | Tree cutting (a) type of tree suru, total qty (02), qty as per girth (3 feet 7 inch in one number & 6 feet 1 inch in one number).(b) type of tree Badam, total qty (01), qty as per girth (2 feet 9 inch in one number). (c) type of tree Karanj, total qty (03), qty as per girth (4 feet 6 inch in one number, 3 feet 4 inch in one number & 6 feet in one number ) |
| 120 | M&L for application of wall treatment incl surface preparation opening of cracks and application of cement based coat as per manufacturing instruction having min service life of 5 years warranty and complete all as specified & directed. Make:- Themacool or Dr Fixit or Asian Paint or techno commercial equivalent as approved by GE. |
| 121 | M & L for Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc not exceeding 10 sqm on plan and getting out soft/loose soil complete all as specified and directed. |
| 122 | M&L for cement concrete (1:4:8) type D-2 as in foundation fillings and mass concrete complete all as specified and directed. |
| 123 | M&L for precast cement concrete solid block masonry (1:3:6) type C1, setting in CM (1:4) exceeding 10 cm in width complete all as specified and directed. |
| 124 | M&L for providing cement concrete (1:3:6) type C-1 using 20mm graded stone aggregates as in coping, benching and like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 125 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) in surface channels or drains, including necessary formwork, finished to required shape complete all as specified and directed. |
| 126 | M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 127 | M&L for providing precast cement concrete (1:2:4) type B-1, using 20mm graded stone aggregates as in cover slabs (Manhole covers) & drain cover and similar articles with plain faces set in cement mortar (1:4) complete all as specified and directed. |
| 128 | M&L for 15mm thick rendering in cement mortar (1:4) finishing the surfaces even and smooth without using extra cement on fair faces of brick work with using water proofing compound as per manufacturers instructions complete all as specified and directed.(WPC shall be paid separately) |
| 129 | M&L for 150 mm dia for reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed |
| 130 | M & L for cement concrete 1:4:8 Type D-2 as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes of 150mm dia pipes after they are laid and tested complete all as specified and directed. |
| 131 | Removing excavated material exceeding 1.50 km but not exceeding 5 km and depositing outside MD land complete all as specified and directed. |
| 132 | M&L for PCC (1:3:6) type C2 using 40 mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 133 | M&L for 10 mm thick cement plaster in CM (1:4) on cement concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 134 | M&L cement concrete cement concrete (1:2:4) type B2 (40 mm graded) in surface channels and drains complete all as specified and directed. |
| 135 | M&L for Extra for forming fair finished drain or channels 50 cm girth in cement concrete using extra cement including forms moulds mitred/sopeed ends etc. complete all as specified and directed |
| 136 | M & L for Reinforced concrete pipes, class NP2, 450 mm laid and jointed complete with collars complete all as specified and directed. |
| 137 | Surface excavation not exceeding 30cm deep and averaging 30 cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 138 | Excavation over areas not exceeding 1.5m deep and getting out in hard/dense soil complete all as specified and directed. |
| 139 | M&L for soling (or sub base) 150 mm thick (spread thickness) with broken boulders or quarried stone hand packed tightly, interstices filled, surface formed and rolled and consolidated with power roller 8 to 12 tonne capacity to required gradient and camber etc., complete all as specified and directed. |
| 140 | M&L for WBM 75 mm thick (in two layers) with broken boulders or quarried stone hand packed tightly, interstices filled, surface formed and rolled and consolidated with power roller 8 to 12 tonne capacity to required gradient and camber etc., complete all as specified and directed. |
| 141 | M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in subbase 100mm thick finished to receive floor treatment with and inclusive of formwork etc complete all as specified and as directed. |
| 142 | M & L for 250 mm thick RCC M30 in pavement/hard-standing complete all as specified and directed. |
| 143 | M & L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, grade A filled with sealing compound etc complete all as specified and directed. |
| 144 | M & L for forming 20 mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’, complete all as specified and directed |
| 145 | Finishing the surface of concrete pavement by brooming complete all as specified and directed. |
| 146 | Removing excavated material exceeding 32 Km and depositing where directed complete all as specified and directed. |
| 147 | Supply and fixing in trenches for suction pipe jointing GI tubing medium grade 25mm dia including all fittings such as bends, elbows, tees, union, short pieces connectors check nut, cap plugs etc for the size complete all as specified and directed. Note : Excavation and earthwork will be measured and paid seperately under relevant items. |
| 148 | Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe for 25mm complete all as specified and directed. |
| 149 | M & L for drilling and taping cast iron water mains (in position) for branch connection of the internal dia 25mm comnplete all as specified and directed. |
| 150 | Supply, lay, testing and commissioning LT XLPE cable insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 volts grade of size 25sqmm, 3.5 core complete all as specified and directed. |
| 151 | Supply and laying DWC HDPE pipes of pressure rating 6 kgf/cm2 (PE-63 grade) of size 32mm bore laid in trenches for passing of cable complete all as specified and directed. |
| 152 | Material and Labour for concealed point wiring using approved colour coding as per IS ,1100 volts grade, 1.5sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, part II, drawn in and including PVC conduit (minimum 20mm dia) concealed in wall etc (also including cutting chiseling in wall and making good the same in CM 1:3 to match with the adjoining surfaces) with all accessories, fittings, PVC junction boxes etc, also including 1.5sqmm, PVC insulated, connected to common earth dolly complete all as specified and directed for one light point/ fan / bell point controlled by one one way switch, complete all as specified and directed |
| 153 | Description all as item No. 152 above but for One 2 pin/ 3 pin socket outlet 5 Amps on independent board. |
| 154 | Description all as item No. 152 above but for One 2 pin/ 3 pin socket outlet 5 Amps on same board. |
| 155 | Description all as per Item No 152 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point, 6 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly all as specified and as directed Note for Item 155 : (i) Cutting chases for conduits and sinking's for PVC switch boxes and making good to walls in cement mortar 1:3 to match with existing surfaces shall be carried out by the contractor without any extra cost from the department.(ii) Partially partly wiring in casing caping with all fittings accessories PVC junction boxes whereever concealed wiring is not possible on the surfaces of RCC slab / ceiling /columns / beams etc shall deemed to be included in the unit rate quoated against item. |
| 156 | M & L for point wiring with 4sqmm PVC insulated unsheathed 1100 volts grade cable stranded copper conductor single core drawn through and including concealed on rigid PVC conduit and conduit accessories of 20/25mm complete with sunk iron pressed steel terminal box concealed in wall for fitting mounting switch/sockets regulators etc with laminated sheet 3mm thick cover and with 4sqmm PVC insulated copper conductor earth wire and connected to earth dolly for one 15 amp socket point for connecting water coolers/ AC/ Geysers etc |
| 157 | S & F ceiling rose three terminals AC 240 volts 50Hz complete all as specified and directed. |
| 158 | S & F switch modular one way 6/5 amps 1 module complete all as specified and directed. |
| 159 | S & F switch modular one way 16/20 amps 1 module complete all as specified and directed. |
| 160 | S & F socket modular 6 amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 161 | S & F socket modular 16/20 amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 162 | Supply and fixing bell ding dong 240 volt AC 50 Hz complete all as specified and directed. |
| 163 | S&F modular bell push 6amp 1 module complete all as specified and directed. |
| 164 | S & F sheet metal enclosure powder coated for MCB DB SPN 12 way double door with din rail and 200 amp bus bar complete all as specified and directed. |
| 165 | Supply and fix MCB SP 240 volts 6 to 32 amps breaking capacity 10 KA, B curve rating complete all as specified and directed |
| 166 | Supply and fix MCB SPN 240 Volts 6 to 32 Amps breaking capacity 10 KA, B curve rating complete all as specified and directed. |
| 167 | Supply and fixing modular metal flush box 1/2 module complete all as specified and directed. |
| 168 | Supply and fixing modular metal flush box 3 module complete all as specified and directed. |
| 169 | Supply and fixing modular metal flush box 8 module complete all as specified and directed. |
| 170 | Supply and fixing modular white cover plate with frame 1/2 module complete all as specified and directed. |
| 171 | Supply and fixing modular white cover plate with frame 3 module complete all as specified and directed. |
| 172 | Supply and fixing modular white cover plate with frame 8 module complete all as specified and directed. |
| 173 | S & F tube light fitting LED 20 watt with decorative end caps made out of CRCA sheet powder coated complete with housing with aluminium heat sink on back of leds, power factor > 0.9, having inbuilt surge protection device for overvoltage protection with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceiling rose / PVC connector to light fitting and shall be fitted on new plastic square/round block complete all as specified and directed. |
| 174 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote complete all as specified and directed. |
| 175 | Supply and fixing LED security light fitting 35 watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 176 | Supply anf fix exhaust fan, steel body AC single phase, 230V of size upto 300mm sweep with blades and frame complete all as specified and directed. Please Enable Macros to View BoQ information |
