|
| 1 | Construction of embankment /patri with material obtained from borropit cartage 5.00km . Construction of embankment / patri with material obtained from borropits cartage 2.00 km . Construction of embankment /patri with approved material obtained from borrow pits with all lift and leads transporting to site spreading grading to required slope and compacting to meet requirement of table 300.2 |
| 2 | Earth work in excavation by mechanical means (hydraullic excavator ) / manual over area (exceeding 30cm in depth 1.5 m in width as well as 10 sqm on plan ) including getting out and disposal excavated earth lead upto 50m and lift up to 1.5m in comp position D.S.R 2023 SI NO 2.6.1 |
| 3 | brick work with common brunt clay f.p.s (non modular )bricks of classdesigin 7.5 in super stucture above plinth level in (1;4) motor DSR 2023 SI. NO 6.4.1 |
| 4 | brick work with common brunt clay f.p.s (non modular )bricks of classdesigin 7.5 in super stucture above plinth level in (1;4) motor DSR 2023 SI. NO 6.4.1 |
| 5 | 12 mm thick plaster in (1:4) mortar with cement and f/sand on brick work in comp position DSR 2023 SI NO 13.4.1 |
| 6 | Rcc work in (1:1;5;3) mortar in plinth beam with 2cm gauge stone grit cement c/sand including all material labour tools etc in comp.position DSR 2023 SI NO 5.2.2 |
| 7 | mild steel in rcc work in comp.position (s.i-504) |
| 8 | CC in (1:2:4)mortor on brick work top with approved stone grit cement and c/sand in comp.position DSR2023 SI. NO . 4.1.3 |
| 9 | STEEL WORK WELDED IN BUILT UP SECTIONS / FRAMED WORK INCLUDING CUTTING HOISTING FIXING IN POSITION AND APPLYING A PRIMING COAT OF APPROVED STEEL PRIMER USING STRUCTURAL STEEL ETC AS REQUIRED . IN GRADING FRAMES GUARD BAR LADDER RALLING BRACKETS GATES AND SIMILAR WORKS INcluding leaser cutting in complete/ possition in DSR 10.25 .2 |
| 10 | providing wall putty on new surface with approvel quality material of berger /j.k./birla/or similar make 2 coats, DSR SI NO 13.8 |
| 11 | finishing wall with Acrylic smooth exterior paint of required shade new work (two or more coat applied). DSR 13.46.1 |
| 12 | painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coat on new work over an under coat of uitable shade with ordinary paint of approved brand and manufacture 2023 si no 13.61.1 |
| 13 | s/fixing 6mm thick china white glazed tile in flooring or in skirting or in dado laid with 1:3 cement and approved c/sand mortar finished white cencnt slurry ,jointing and polishing comp.position (s.i-628) |
| 14 | Providing and laying \\"brick coba\\"12mm thik laid with M-150 class brick bats coba 7.5cm thick with gap of 15mm to each other ,over 20mm thick base of cement mortar (1:4) mortar mixed with water proofing compound spreading cement sullery mixed with aerelic cement concrete with water proofing compound in comp.position (s.i-new item ) |
| 15 | White vitreous china orissa pattern W.C pan of size 580x440mm Hindware or equpment with intergral type foot rest and 1 piece construction white vitreous china squatting plate with an intergal longitudinal flushing pipe with 5.0liter P,V,Cautomatic flushing cistern in comp.position (s.i- |
| 16 | Providing and fixING WHITE vetreous china pedestal type water EUROPEAN TYPE standarad size ISI marked hindware or equivalent with seal and lid c.p flush bend |
| 17 | Providing and fixing white vitreous china flate back or wall corner type lipped front urinal basin of 30x26x350 mm and 340x410x265 mm size respectively with automatic 5 ltr pvc flushing cistern with standard flush pipe and C.P brass in comp positon including wall cutting with repair in comp.position (s.i-new item 21.14 |
| 18 | Providing and placing on terrace (at all floor levels) polyethylene water stroge tank ISI mark (sintex or equivalent) with cover and suitable loking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fitting and the base support for tank in comp position s.i-new item 21.11 |
| 19 | Providing and fixing 550mmx400mm hand basin white glazed earthen 1\\"qulity I.S.I marked (Hindstan ,nayyer care make )with R.S bracket painted white 15mm dia brass piller cock parco make with mattel matel handle I.S.I including all material labour tools etc in comp.position including fixing of 32 mm G.I waste pipe as require |
| 20 | Scraping old white or colour wash including disposal of refuse as directed by the engineer in charge within a distance of 60 metre. S.i. 708 |
| 21 | Providing and laying \\"brick coba\\"12mm thick laid with M-150 class brick bat coba 7.5cm thick with gap of 15mm to each other over 20mm thik base of cement mortar 1:4 cement and c/sand mixed with water proofing compound spreading cement slurry mix.top mashed false square 30x30cm and side wall parapet shall be rounded by brick ballast cement and c/sand masonry coba with top finished plaster mixed with acitic water proofing compound @2% by weight in comp.position (s.i-new item) |
| 22 | Supply & fixing of electric fitting in toilet in complete/ possitin |
| 23 | Supply & fixing of sainetery fitting in toilet in complete/ possitin |
| 24 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the D.S.R 2023 S.I NO 19.120.2 Please Enable Macros to View BoQ information |
