|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 2 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. ordinary rock |
| 3 | Excavation in soil in hilly area by manual means inclluding cutting sn trimming of side slopes and disposing of excavated eart with all lifts and lead upto 50 meters |
| 4 | Providing and laying hand packed stone soling in building works with clean hard selected stones all complete. |
| 5 | Providing & Laying in position cement concrete of 1:2:4 mix. (1 cement, 2 coarse sand,4 graded stone aggregate of 20mm & down size) including compacting curing etc. all complete. |
| 6 | Providing & Laying in position cement concrete of 1 : 3 : 6 (1 cement, 3 coarse sand, 6 graded stone aggregate of 20 mm and down size) including compacting curing etc. all complete. |
| 7 | Filling inside plinth in building works with 23 cm layers, consolidated to 15cm including watering, ramming etc. all complete. |
| 8 | Filling with available excavated earth in trenches, plinth and side of foundation in building works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 9 | Providing and laying Coarse Rubble Stone Masonry with hammered dressed clean hard selected stone in 1:3:6 c.c. (1 cement, 3 clean coarse sand, 6 clean hard graded stone chips of size 40 mm down nominal gauge) including bond stone, through stone of size 150 mm x 150 mm x 450 mm manufactured in 1:4:8 (1 cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) curing etc. all complete. |
| 10 | Providing and laying Random Rubble Stone Masonry with hammered dressed clean hard selected stone in 1:3:6 c.c. (1 cement, 3 clean coarse sand, 6clean hard graded stone chips of size 40 mm down nominal gauge) including bond stone, through stone of size 150 mm x 150 mm x 450 mm manufactured in 1:4:8 (1 cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) curing etc. complete, as per direction of Engineer - in - Charge excluding the cost of carriage of materials. |
| 11 | Providing hand packed filling with clean hard selected stones all complete. |
| 12 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge). |
| 13 | Providing, fixing and removing form work for casting R.C.C items as indicated below: |
| 14 | Foundation, footings, base of column etc. for mass concrete. |
| 15 | Square columns |
| 16 | Form work for beam, lintels, girders, brersumers & cantilevers. |
| 17 | Floor slab, roof slab, landing, balcony & access platform. |
| 18 | Floor slab, roof slab, landing, balcony & access platform. |
| 19 | Supplying, bending and placing in position of Tor steel reinforcement in all R.C.C works i/c cost of binding wires all complete. |
| 20 | Supplying, bending and placing in position of Tor steel reinforcement in all R.C.C works i/c cost of binding wires all complete. |
| 21 | Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 50% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge. |
| 22 | Providing box drain of 30 cm (ht.) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (1cement, 2 clean coarse sand, 4 clean hard selected stone chips of size 20 mm and down nominal gauge) in side walls thickness of 23 cm ( hill side) and 30 cm (road side) and 1:3:6 c.c mix (1cement, 3 clean coarse sand, 6 clean hard selected stone chips of size 20 mm and down nominal gauge) base concrete of thickness of 15 cm with standard specification over 15 cmm stone soling including providing & laying guard stones complete, as per the direction of Engineer-in-charge. |
| 23 | Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction ofEngineer in Charge including curing etc all complete. |
| 24 | Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. (1:3 Mix) |
| 25 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 26 | Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 27 | Providing and Laying 20mm thick granite stone in Risers of steps, skirting and pads, walls, pillars etc laid on 10mm thick base c.m. 1:3 joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 28 | Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 200mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 29 | Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm luster printed ( loreno, bronzo, colubia or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 30 | Providing/ fitting/ fixing of dressed sal timber in all types of frames complete.( With locally available timber) |
| 31 | Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete. |
| 32 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) |
| 33 | Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing 12Kg/sqm as per the direction of Engineer - in- Charge all complete |
| 34 | Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts, fasteners |
| 35 | Providing & fixing brass bright finished butt hinges with necessary screws etc. complete. |
| 36 | Providing, fitting & fixing sliding door bolts of size 300mm x 16mm with nuts and screws etc. complete. |
| 37 | Providing, fitting & fixing Tower bolts 300mm x 10 mm with necessary screws etc. complete. |
| 38 | Providing, fitting & fixing Handles 125 mm size with necessary screws etc. complete. |
| 39 | Providing Fitting and Fixing of MS Steel Railing including applying of priming coat and painting all complete as per the direction of engineer incharge |
| 40 | Supplying, fabricating, fitting and fixing tubular truss including putty, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc complete in curve shaped Sikkim- style roofing as per the standard specification and design and as per the direction of Engineer - in- Charge all complete |
| 41 | Providing, fitting, fixing of 24 BWG Pre-painted HULAS sheet roofing with lapping of 150mm (two corrugation) with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete. |
| 42 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULAS Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 43 | Providing fitting and fixing 30cm deep 24BWG Pre-painted HULAS sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets all complete. |
| 44 | Providing & fixing 15cm wide 45cm overall semicircular pre-painted (HULLAS) sheet (Class I) gutter with iron brackets 40x3mm size, bolts filled with epoxy in each bolts, nuts (8 to 10 gm per bolt), washers etc including making, connection with rain water pipes. |
| 45 | Providing / Fitting / Fixing 25mm ceiling in wooden frames panisaz or equivalent including frame work excluding the cost of polishing and priming all complete. |
| 46 | Providing / Fitting / Fixing of PVC Ceiling Work including making of channel in steel frame all complete as per the direction of engineer incharge. |
| 47 | Providing, fitting and fixing of Optra Acoustical Sound Proof Ceiling panels- (Armstrong) of glass wool/rock wool ceiling for high acoustic spaces with glass wool/rock wool as core material.Size options tiles 600x600mm and 1200 x 1200mm, Planks (with concealed edge options) 450 x 1200 upto 450 x 2700mm 650 x 1200 upto 600x2700mm.Thickness15mm, 20mm, 25mm and 30mm. Edge details Butt, Tengular, Microlook and concealed - SL2 Surface finish Classic, Pearl and Pebble, all complete. |
| 48 | Providing, fitting and fixing of Optra Acoustical Sound Proofing Wall panels- (Armstrong) of glass wool/rock wool ceiling for high acoustic spaces with glass wool/rock wool as core material.Size options tiles 600x600mm and 1200 x 1200mm, Planks (with concealed edge options) 450 x 1200 upto 450 x 2700mm 650 x 1200 upto 600x2700mm.Thickness15mm, 20mm, 25mm and 30mm. Edge details Butt, Tengular, Microlook and concealed - SL2 Surface finish Classic, Pearl and Pebble, all complete. |
| 49 | Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete |
| 50 | Providing and painting with Plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. |
| 51 | Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface. |
| 52 | Providing and French spirit polishing two or more coats including cleaning of the surface to make smooth and free from dirt and dust and sand papering etc. on new look complete. |
| 53 | Providing & applying priming coat with ready mixed Red oxide, zinccromate primer on steel/galvanized Iron steel works including preparation of the surface complete. |
| 54 | Providing and painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade including cleaning the surface complete on new surface. |
| 55 | Providing and Laying of Stone Cladding in approved texture from the competent authority in cement sand mixed with 1:3 mixed with chemical all complete as per the direction of engineer incharge |
| 56 | Provision for props, hoisting aparatus, curtains and other Stage flooring, decors audio video screens and output instruments all complete as per the direction of engineer incharge (To be paid as per actual) |
| 57 | Provision for Exavating temporary approach road to transportation of materials and men |
| 58 | Providing, fitting & fixing of Glass reinforced concrete of traditional works like cornices,Zhu, Drey-Zhu, Tashi Daygay, Namju Wangdel, Kachen Pattern making of scaffolding i/c the cost of all required paints. etc. as per the design & direction of the Engineer-in-charge all complete. |
| 59 | Providing and Painting on wall surface with traditional decorations (Dhapri painting), all complete. |
| 60 | Providing and fixing anodized aluminum works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading for glazing / paneling CP brass / stainless screws, all complete as per design and drawings andthe direction of the Engineer - in - Charge. |
| 61 | Providing and fixing glazing in Al. doors and windows ventilaor shutters and partitions etc. with PVC / neosprene gasket with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge. |
| 62 | Provision for preparing temporary site office, Labour Huts and Approach road etc all complete. (To be paid as per actuals) |
| 63 | Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compacting and the cost of fittings) all complete |
| 64 | 40mm dia GI Pipe |
| 65 | 15mm dia GI Pipe |
| 66 | Cost of Fittings |
| 67 | Provision for Internal accessories i/c fitting and fixing all complete |
| 68 | Haulage for stock material via Surfaced Road for the distance of 60 km excluding loading and unloading all complete. |
| 69 | Loading and Unloading of Cement or Steel by Manual Means and Stacking. |
| 70 | Haulage for Fine aggregate via surfaced road for the distance of 50km excluding loading and unloading all complete. (Sand) |
| 71 | Haulage for Coarse aggregate, via Surfaced Road for the distance of 50km excluding loading and unloading all complete. (Stonechips) |
| 72 | Cost of Haulage Excluding Loading and Unloading of Stone within 50 km all complete. |
| 73 | Haulage for throwing away of excavated earth via Surfaced Road for the distance of 15 km excluding loading and unloading all complete. |
| 74 | Cost of Haulage Excluding Loading and Unloading of excavated earth within 20 km radius all complete. |
| 75 | Loading and Unloading of Fine aggregate,Coarse aggregate, Stone Boulder, excavated earth. |
| 76 | Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kanker/Moorum. |
| 77 | Provision for Internal and External Electrification |
| 78 | Provision for Furniture and Furnishing Please Enable Macros to View BoQ information |
