Tender For Construction Of New 100 Seated Hostel Building At Pendrani Maha Vidyalaya, Umerkote Under Umerkote Block, Nabarangpur-Odisha

TDR : 55682923

Tender Notice
BOQ

13 Days Left

Nabarangpur , Odisha

Tender Brief : Tender For Construction Of New 100 Seated Hostel Building At Pendrani Maha Vidyalaya, Umerkote Under Umerkote Block

Document Fees
₹ 10000 /-

EMD
₹ 317100.0 /-

Tender Value
₹ 3.17 Crore /-

Submission Date
09-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	CIVIL WORKEarth work in excavation of foundation in all kinds of soil in foundation within 50M initially lead and 1.50M initially lifts including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.03Mtr in depth & levelling bed etc complete as directed by the Engineer-in-Charges.
2	Filling foundation and plinth with sand including watering and ramming including cost, conveyance and royality and taxes of all materials and labour with T&P required for the work etc. complete as per specification and direction of Engineer-in-Charge.
3	Supplying diluting and preparing chemical emulsion like CHLORYPHYIRIPHOS OR other chemicals approved by central insectiside boards or as per directed by the menufacturier and spraying the mixture uniformly by sprayer as per constructional antytormat treatment and creating a chemical barier under and around wall trenches ,basement ,excavation top surface of plinth filling ,unction of wall and floors along with external perimeter of the building surrounding the pipes and conduits etc. complete at the rate of 7.5 liter or as direction by the manufacture per Sqm on vertical and 5.0 liter per sqm on Horizontal surface .50% of the emulsion to be filled in the holes mode in trenches at 150 mm center to center etc. complete as oer IS:6313/1981 Part-11 and as per the direction of Engineer in Charge including all cost of materials labour,taxes etc all complete.
4	Cement concrete in (1:3:6) using 40mm size Hard Granite Crusher Broken metal including watering and curing,cost,conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete and as per specification and direction of Engineer in Charge.
5	Fly Ash Brick Masonry work in C.M. (1:6) in F&P using 23cm x 11cm x 8cm size Fly Ash Brick including watering and curing, cost, conveyance,taxes and royalties and labour etc complete.
6	Fly Ash. Brick Masonry in C.M. (1:4) in Foundation using 23cm x 11cm x 8cm size Fly Ash Brick including watering and curing, cost, conveyance,taxes and royalties and labour require for the work etc complete.
7	Rigid and smooth centering and shuttering for RCC works including false works and dismantling them after casting including cost of materials complete in ground floor
8	RCC work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips incuding watering and curing etc. complete as per direction of Engineer-in charge. A) GROUND FLOORa) Columns Footing
9	b) Plinth Beam
10	c) Columns
11	d) Lintel Bend
12	e) Chajja
13	f) Stair case
14	g) Roof Slab
15	h) Roof Beam
16	B) FIRST FLOORa) Columns
17	b) Lintel Bend
18	c) Chajja
19	d) Stair case
20	e) Roof Slab
21	f) Roof Beam
22	C) SECOND FLOORa) Columns
23	b) Lintel Bend
24	c) Chajja
25	d) Roof Slab
26	e) Roof Beam
27	Supplying, fitting and placing uncoated HYSD bars reinforcement tying the grills, straighten placing them in position including cost of bindings wire 18 to 20mm gauge including cost of HYSD bar with conveyance and royalty etc. complete and as per technical specification and direction of Engineer-in charge. A) GROUND FLOOR
28	B) FIRST FLOOR
29	C) SECOND FLOOR
30	Fly Ash. Brick Masonry in C.M. (1:6) in Superstructure using 23cm x 11cm x 8cm size Fly Ash Brick including watering and curing, cost, conveyance,taxes and royalties and labour require for the work etc complete.A) GROUND FLOOR
31	B) FIRST FLOOR
32	C)SECOND FLOOR
33	Fly Ash. Brick Masonry in C.M. (1:4) in Superstructure using 23cm x 11cm x 8cm size Fly Ash Brick including watering and curing, cost, conveyance,taxes and royalties and labour require for the work etc complete.A) GROUND FLOOR
34	B) FIRST FLOOR
35	12mm thick Cement Plaster in C.M. (1:6) over brick work including watering and curing, cost, conveyance,taxes and royalties and labour with required for the work etc complete.A) GROUND FLOOR
36	B)FIRST FLOOR
37	C)SECOND FLOOR
38	16mm thick Cement Plaster in C.M. (1:6) over brick work including watering and curing, cost, conveyance,taxes and royalties and labour with required for the work etc complete.A) GROUND FLOOR
39	B)FIRST FLOOR
40	C)SECOND FLOOR
41	6mm (1/4”) thick Cement Plaster in C.M. (1:4) finished smooth to RCC Surface including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges.A) GROUND FLOOR
42	B) FIRST FLOOR
43	C) SECOND FLOOR
44	12mm thick cement plaster (1:3) on brick work including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges.
45	Cement Punning including watering and curing, etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges.
46	Supplying fitting and fixing of vitrified tile in floors of size 600mmx600mm of approved make conforming to IS:13755 laid on 210mm thick Cement Mortar (1:4) (1 Cement : 4 Course Sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of Engineer-in-ChargeA) GROUND FLOOR
47	B)FIRST FLOOR
48	Providing fitting & fixing Vetrified tiles in dados ,skirtings and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including all cost, conveyance,taxes,royalities etc. complete.A) GROUND FLOOR
49	B)FIRST FLOOR
50	Providing fitting & fixing of granite tiles in floor including cost, conveyance etc complete.A) GROUND FLOOR
51	B)FIRST FLOOR
52	Fixing of Kota tiles in floors tread or steps and landing on 25mm thick bed on CM(1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, conveyance and tax of tile etc complete.A) GROUND FLOOR
53	Providing & fixing of Floor Tiles in floors treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the shade including rubbing and polishing as per the design & drawing with cost of all materials, labour, conveyance, taxes , T&P etc. complete as per the direction of Engineering -in-charge. A) GROUND FLOOR
54	B)FIRST FLOOR
55	Fixing of wall tiles in dados, skirting riser of steps on 12mm thick cement plaster CM(1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, conveyance and tax of tile etc complete.A) GROUND FLOOR
56	B)FIRST FLOOR
57	2.5cm (1”) thick Grading Concrete over roof slab in Cement Concrete (1:2:2) 6mm (1/4”) size Clean hard black crusher broken granite Chips of approved quality from approved quarry including hosting lowering and laying in layers ramming watering and curing etc complete including all cost, conveyance, taxes and royalties of materials and labour with T&P required for the work etc complete. A)GROUND FLOOR
58	B)FIRST FLOOR
59	B)SECOND FLOOR
60	Providing and fixing ISI marked 35mm thick flush door shutter confirming to IS:2202 (Part-1) decorative type ,core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete as per the direction of Engineer -in-charge.A) GROUND FLOOR & FIRST FLOOR
61	Manufacturing and supplying of M.S. Doors, windows, grills, vantilotors , collarseble gate and doors frame with pannel shuter made out of structural steel plates and bars conferming to IS spesification as per drawing, design, including with all cost, laour, T&P etc complete as per direction of Engineer-in-charge.A) GROUND FLOOR
62	B)FIRST FLOOR
63	Supplying ,Fitting and fixing of ISI Marked two track UPVC Sliding Window of approved make with 6mm thick glass of approved quality complete with frame ,shutter and all fitting and fixtures etc. complete as per the direction of Engineer -in-charge.A) GROUND FLOOR & FIRST FLOOR
64	Cement concrete in (1:2:4) using 12mm size Hard Granite Crusher Broken chipss including watering and curing,cost,conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete and as per specification and direction of Engineer in Charge. A) GROUND FLOOR
65	Finishing surface of walls with Cement based Wall Putty (Water Based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes labour T&P required for the work etc. completeA) GROUND FLOOR
66	B) FIRST FLOOR
67	C)SECOND FLOOR
68	Providing & Painting with two coats to the entire inside surface with Plastic Emulsion Paint of any approved make to the outer surface after scraping and cleaning the surface over Water Bound Cement Primer including all cost of materials, scaffolding, labour T&P etc complete as per direction of Engineer-in-charge.A) GROUND FLOOR
69	B) FIRST FLOOR
70	C) SECOND FLOOR
71	Weathering two coat with any approved Weather coat on new work after scraping and cleaning the surface over one coat of water bound wall primer including watering and curring all cost of materials, scaffolding, labour with T&P etc. complete as per direction of Engineer-in-charge.A) GROUND FLOOR
72	B) FIRST FLOOR
73	C) SECOND FLOOR
74	Painting Two coats (Enamel Paint) with any approved shade on new/Old Doors and windows including all cost, conveyance,tax of materials and labour with T&P required for the work etc complete.A) GROUND FLOOR
75	B) FIRST FLOOR
76	C)SECOND FLOOR
77	Supplying fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @0.90mtr.C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing,polishing etc with cost. conveyance, taxes of all materials ,T&P etc. required for the complete as per direction of Engineer in Charge.A) GROUND FLOOR AND FIRST FLOOR
78	Filling F & P With Excavated materials (2/3 Quantity of Excavation ) including cost and conveyance of all materials ,labour T&P ,Hire charges of machine ,all ,taxes and etc all completes all respects as per direction of Engineer charge.
79	Provision for Display Board etc.
80	INTERNAL ELECTRIFICATIONRecessed wiring to Light points/fan points/ Exhaust fan/ Call bell in 20mm dia non- metalic flexible Polythine conduit, confir-ming to IS-6946/1973 with 1.5mm² 1.1KV in- sulated, S.C.multistrand HR FR copper wire of ISI markedGround FloorGroup A
81	Group B
82	Group C
83	First FloorGroup A
84	Group B
85	Group C
86	Recessed wiring to 5/6Amps.socket outlet with 2x1.5mm² F.R. PVC Insulated single core multi-strand copper conductor of ISI marked in with 20mm dia non-metalic PVC flexible conduit with 6A. Ground FloorGroup A
87	b) On Existing Board
88	First FloorGroup A
89	b) On Existing Board
90	Supplying and fixing of metal box of 180X100Xmm deep (nominal size) on surface or recess with suitable size of phenolic modular sheet cover in front including proving and fixing of 3pin 15/16Amps modular socket outlet and 15/16a modular switch connection painting etc as requiredGround Floor
91	First Floor
92	Recessed wiring to submain in following size of FR PVC insulated Single core multistrand copper conductor of ISI marked confirming to IS-694/1900 in 20mm dia non-metalic heavy duty flexible conduit 1.5mm thick alongwith FR PVC insulated S.C.multistrand copper conductor as earth wire as required. (Make of wire-Finolex/am Anchor/ Havels/ Polycab) (a) 1x1.5mm2 for Inverter wiring.Ground Floor1x 1.5mm2 for inverter wiring
93	2 x 1.5mm2 + 1 x 1.5mm2(Extra wire for Group-b 7 Group-c)
94	2 x 2.5mm2 + 1 x 1.5mm2
95	2 x 4mm2 + 1 x 1.5mm2
96	First Floor1.5mm2 for invert wiring
97	2 x 1.5mm2 + 1 x 1.5mm2(Extra wire for Group-b 7 Group-c)
98	2 x 2.5mm2 + 1 x 1.5mm2
99	2 x 4mm2 + 1 x 1.5mm2
100	3 x 6mm2 + 2x 2.5mm2
101	Supplying and fixing of batten holder /B.K Angle holder of ISI markeed including connection etc as requiredGround Floor
102	First Floor
103	S/F. of 8Way double door D.Box with 1x40A.DP + 6X6A-32A. S.P.MCB of Havells/L&T/C&S/Legrand make.Ground Floor
104	First Floor
105	S/F. of 48\\" 1200mm Usha-Aure Ivory/Havels-ES Plus (2 Star)/C.G G-Entrust-50 1 Star/Bajaja-Shimmer BBD Pearl Bianco CF makeGround Floor
106	First Floor
107	S/F. of 150mm Vantilator/Exhaust fans of Bahar 150 mm Metallic Grey Dom Make.Ground Floor
108	First Floor
109	S/F. of step type Electronic fan regulator of cona/Anchor makeGround Floor
110	First Floor
111	S/F. of 20Wt LED Tube light fitting of Havels -Lumiline NEO/Crompton-20Wt Laser Ray make.Ground Floor
112	First Floor
113	S/F. of 18Wt LED Surafe mounting down lights of Havels-Teim Cosmo Surface Round/Bajaj-SLEEK SURFACE LED make.First Floor
114	Ground Floor
115	Supply & Fixing of 9Wt LED Lamps of ISI MarkedGround Floor
116	First Floor
117	S/F. of 45Wt. LED Street light fitting of Havels ENDURAPEARLNESOSL/Bajaj-EDGE BRTFG/ Crompton-FREEDOM NEO LSTS-45-CDL-M makeGround Floor
118	S/F. of 45Wt Surface mounting light of Havels make-PLUTO PANEL (SURFACE)/Bajaj/C.G.LED 2X2 LED fittings:Ground Floor
119	S/F. of 63A.415V.TPN Main Switch of Havels /L&T/C&S make including all accessories & connection.First Floor
120	S/F. of 63A.415v.4WAY Copper Bus Bar of Havels make including all connections.First Floor
121	S/F. of 100A Cubicle Panel board made out of 16SWG C.R.C.A Sheet with power coats & following items:a) 100A.25kA.4pOLE mccb of Havels/L&T/C&S Make-01No.b)Suitable size of Bus Bar complete:-01 nos© 40A.D.P MCB of Havels/L&T/C&S make:;-06 nos(d) Digital volt meter Ammeter-------etc CompleteGround Floor
122	Providing and Fixing of 4.5 Kgs Capacity CO2 gas type ISI MARKED FIRE EXTINGUISHER (is:15683) fitted with high pressure 1mtr.long diacharge hose & horn complete with refill gas carrying handle and wall mounting bracket tec as required make safex/Fireshield/CeasefireGround Floor
123	First Floor
124	S/F. of Standard earthing confirming to IS-3043/1987 including S/F. of 38mm/40mm dia heavy duty G.I. pipe 3mtr long confirming to IS-1239/Part-1/1990. The pipe shall have 12mm dia perforated holes at 15cm Interval centre to centre upto 2.5mtr height from the bottom to upper end threaded and fitted with 38mm/40 mm dia G.l. flangeGround Floor
125	First Floor
126	Supply & Laying of No.8G.I wire for extension of Earth continuity (To be run from Gr.Gloor to 1st Floor )
127	S/F OF 2500VA U.P.S of MICROTEK/Livfast makeGround Floor
128	First Floor
129	S/F OF Tubular Battery of Exide-FE01 6EL TUBULAR-200AH/MAXTT 2466 210AH 200AH/Luminus-UCTT 25066 12V makeGround Floor
130	First Floor
131	PH WORKProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, inluding all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in Charge20mm dia CPVC SDR-11 pipeGround Floor
132	1st Floor
133	25mm dia CPVC SDR-11 pipeGround Floor
134	1st Floor
135	32mm dia CPVC SDR-11 pipeGround Floor
136	1st Floor
137	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge15mm dia CP angle stop cock (Cera / Parryware / Hindware Make)
138	15mm dia CP short Body bib cock (Cera / Parryware/ Hindware Make)
139	15mm dia CP long Body bib cock (Cera / Parryware/ Hindware Make)
140	15mm dia CP Two way bib cock (Cera / Parryware / Hindware Make)
141	15mm dia CP Pillar cock
142	20mm dia CP consealed stop cock (Cera / Parryware / Hindware Make)
143	15mm dia CP Health Faucet (Cera / Parryware/ Hindware Make)
144	25 mm dia brass/ gunmetal Fullway Valve
145	32 mm dia brass/ gunmetal Fullway Valve
146	15mm CP Extension piece
147	125mm CP grating
148	15mm size C.P. flange
149	Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cemnent mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite, payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in charge 2000 liters capacity PVC water storage tank roof of First Floor
150	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fitings/ P.V.C. pipes and fittings including watering, curing cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.
151	Supplying all materials, labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge
152	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.l./P.V.C. pipes and making good the damages including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
153	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 3592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
154	110mm U-PVC P Trap (Ori Plast/Finolex/Supreme Make Type-B)
155	110mm U-PVC P Door bend(Ori Plast/Finolex/Supreme Make Type-B)
156	110mm UPVC offset without ear(Ori Plast/Finolex/Supreme Make)
157	110mm UPVC Plain bend (Ori Plast/Finolex/Supreme Make)
158	110mm UPVC Cowl(Ori Plast/Finolex/Supreme Make)
159	110mm UPVC plain tee (Ori Plast/Finolex/Supreme Make)
160	110mm UPVC Door tee (Ori Plast/Finolex/Supreme Make)
161	110mm UPVC Socket (Ori Plast/Finolex/Supreme Make)
162	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan incuding jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 580mm size Orissa pan (Cera / Parryware / Hindware Make)
163	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattem squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages . cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per PH specification and direction of the EICEWC (Hindware/Parryware/Neycer make) S Trap
164	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe incuding cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification an direction of the Engineer-in-charge 10 ltr. Capacity pvc L.L. cistern with 32mm. CP long flush bend (Slimline-white Parryware make)
165	Supplying all materials, labour T&P and fixing basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge550mmx400mm W.H.basin(Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make)
166	Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets& mortar including supply of cement concrete etc. all complete. 24\\" x 18\\" x 10\\" sink(Odinary)
167	Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H.specification and direction of Engineer-in charge
168	Supplying all materials, labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings incuding making good the damages etc. all complete as per P.H. specification and direction of Engineer-in charge
169	External PHSupplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 0.60mpa ) including jointing with supply of approved solvent cement by non eat application method/as per manufacture's specification, provoding and laying in trench ement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge110mm dia u-pvc pipe alround concrete
170	160mm dia u-pvc pipe alround concrete
171	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the dods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
172	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft.1 x6.50 x 3.50x 0.60=
173	Supplying all materials labor T&P flling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge..1 x6.50 x 3.50x 0.15=
174	Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete...1 x6.50 x 3.50x 0.15=
175	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.2 x6.50 x3.50x 0.10=
176	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge..1 x 5.75 x 2.75 x 0.15 =
177	Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe 500 grade for RCC work including cutting,bending,binding and tying the grills and placing n position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
178	Supplyíng all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works incuding false work and dísmantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-charge
179	Supplying all materials. labour. T&P and providing brick work in foundation and plinth with 23cmx11cmx8cm size Fly Ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerancet 8% in cement mortar (1:3) incuding watering, 15.58 curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
180	materials,labour, T&P and providing 12mm thick cement plaster(1:3) on brick work incuding watering,curing,cost of Supplying all all materials, conveyance of all materials to worksite,payment of royalty,all taxes etcall complete as per PWD specification and direction of the Engineer-in-charge.
181	Supplying all materials,labour,T&P providing 16mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to 31.11 worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge
182	Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge
183	Supplying all labor T&P & filling foundationand plinth with excavated materials wellwatered & rammed etc. all complete as per direction of EIC.
184	Construction of 1nos production wells including scíentific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all accessories Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor cluding lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore onlyDrilling of 200mm dia bore
185	Drilling of 150mm dia bore
186	Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 200mm dia P.V.C casing pipes
187	Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
188	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all ecessary equípment and labour as per direction of the Engineer in charge By DTH Rig
189	Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: Rocky terrain with boulder formation for 300m depth
190	Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) 1 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 LP.M With outlet dia 25 mm (keeping 100% standby)
191	DOL Control panel
192	40mm dia steel short piece
193	Well cap
194	50mm size CI bracket
195	2.50sqmm flat cable
196	20mm dia rigid UPVC pipes
197	Steel rope with cover
198	Labour charges for lowering including transportation
199	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge 32mm HDPE pipes (Finolex/Supreme make) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of New 100 Seated Hostel Building At Pendrani Maha Vidyalaya, Umerkote Under Umerkote Block, Nabarangpur-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of New 100 Seated Hostel Building At Pendrani Maha Vidyalaya, Umerkote Under Umerkote Block, Nabarangpur-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us