|
| 1 | Earth work excavation in foundation in Hard of soil including hard moorum, stoney earth mixed with boulders ( except sheet rocks and boulders requiring blasting) with all leads and lifts including rough dressing the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P required for the work complete as per direction of the Engineer-in-charge. |
| 2 | CC ROAD |
| 3 | COMPOUND WALL |
| 4 | Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 5 | CC ROAD |
| 6 | COMPOUND WALL |
| 7 | Cement Concrete (1:3:6) in foundation and floors using 4cm size black broken granite aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceding 15cm (6\\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royalty, taxes of all materials and labour with T&P required for the work etc. complete as per direction of the Engineer in charge. |
| 8 | CC ROAD |
| 9 | COMPOUND WALL |
| 10 | Cement concrete (1:1.5:3) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete. |
| 11 | CC ROAD |
| 12 | RCC work of M 25 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying. |
| 13 | footing |
| 14 | column up to plinth level |
| 15 | COMPOUND WALL |
| 16 | plinth beam |
| 17 | COMPOUND WALL |
| 18 | column |
| 19 | COMPOUND WALL |
| 20 | Roof beam |
| 21 | Lintel |
| 22 | Roof slab |
| 23 | Stair case |
| 24 | Chhaja |
| 25 | Providing HYSD bars including cutting, bending, binding and tying the grills and placing in position including cost, conveyance and royalty of all materials and cost of all labour etc. complete |
| 26 | COMPOUND WALL |
| 27 | Fly ash masonary with C.M (1:6) in foundation and plinth including cost ,conveyance, royalty & taxex of all materials, labour, T&P etc. complete including watering and curing for required period as per the direction of the Engineer in charge. |
| 28 | COMPOUND WALL |
| 29 | Fly ash Brick masonary with C.M (1:6) in Superstructure including cost ,conveyance, royalty & taxex of all materials, labour, T&P etc. complete including watering and curing for required period as per the direction of the Engineer in charge. |
| 30 | COMPOUND WALL |
| 31 | 20mm thick cement plaster in C.M (1:4) including punning over walls, finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the |
| 32 | Coal taring two coats including cost of coal tar and tar paper with all cost, conveyance, labour, T&P and cess etc. complete as per specifications and direction of the Engineer-in-charge |
| 33 | 16mm thick inside plastering with cement mortar(1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge. |
| 34 | 12mm thick outside Plastering with cement mortar (1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge. |
| 35 | COMPOUND WALL |
| 36 | 2.5 cm. thick grading concrete (1:2:2) on roof slab with 6mm. size hard granite chips on new work.(HR) |
| 37 | Supplying, fitting and fixing of Vetrified tile of size 60cm x 60cm in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge. |
| 38 | Supplying, fitting and fixing of Vitrified tile (In dados / skirting) of premium grade having thickness 8mm to 10mm conforming to IS 13756 of size 60cm x 60cm plain (Ivory) in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge. |
| 39 | Supplying, fitting and fixing of Ceramic tile (In dados / skirting) of premium grade having thickness 8mm to 10mm conforming to IS 13756 of size 60cm x 60cm plain (Ivory) in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge. |
| 40 | Providing and fixing Kadappa. (up to 10 sqm ) tiles in dados, skirtings and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge |
| 41 | Providing and fixing Chequred tiles in floors, treads of steps and landing on 25mm th bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 42 | Finishing walls with weather seal coat (two coats) over a coat of cement primer to outer walls surface including cost and conveyance of all materials to site, and all labour charges complete as per direction of Engineer in Charge. |
| 43 | COMPOUND WALL |
| 44 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint |
| 45 | Distempering two coats over interior wall surface with Distemper of approved shade including cost and conveyance of all materials to site and all lobour charges complete as per direction of E.I.C. |
| 46 | Finishing wall surface of wall with Acrylic Wall Putty (Water based) of approved make and finished smooth and even surface to receive painting including cost conveyance and royalties of all materials etc complete as per direction of the Engineer in Charge. |
| 47 | Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge. |
| 48 | Providing & Fixing of M.S. window Grills including cost and conveyance of all materials to site, and all labour charges etc complet as per direction of E.I.C. |
| 49 | COMPOUND WALL |
| 50 | Labour for fixing of M.S doors and windows shutters of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 51 | COMPOUND WALL |
| 52 | Supplying and fitting-fixing of Un-plasticised poly Vinyl Chloride (UPVC) (FENESTA/ NCL VEKA LTD) .Casement Window with top fixed- 60-. Series duly manufactured using UPVC reinforced profiles of 60.mm x 55 mm x 2.5mm for outer frames 75 mm x 60 mm x 2.25 mm for casement Door Sash profile and 74 mm x 60 mm x 2.5 mm mullion profile Capable of mounting single glazing system , structurally reinforced with hot dip. galvanised lipto 50 microns of minimum thickness of • 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT - GOBAIN make duly fixed. with EPDM weathering seal resistant accessories like clipping locking system made of alurninimum I No, per set of sashes and the system is to be installed at the site using anchor fasteners I, silicon rubber sealant easy glazingidegtazing at site etc, including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASDM.D 638-14, EN 477-95 |
| 53 | Painting two coats over wood and iron work with approved Enamel paint over a coat of priming including cost and conveyance of all materials to site and all labour charges complete as per direction of E.I.C. |
| 54 | COMPOUND WALL |
| 55 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 56 | Providing fitting fixing of RCC ventilator of size 0.45 m X 0.30 m including all cost conveyance etc. completed. |
| 57 | Providing and fixing rain water down pipe with necessary bend shoes and heads including cost of 75mm dia earthen pipe, clamps and nails etc. with all cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge (HR) Please Enable Macros to View BoQ information |
