|
| 1 | Part - A ( Material)Following Material Supplied by the Contractor:- |
| 2 | Stone Pad |
| 3 | I Hook |
| 4 | Dead End clamp with I Hook |
| 5 | D Box Clamp |
| 6 | Nut & Bolt |
| 7 | Aluminum Jointing Sleeves |
| 8 | F- Clamp for PCC Pole |
| 9 | X- Arm Holding clamp with Nut & Bolt |
| 10 | The work of safe carriage of the following material with loading/unloading from store centre Darshan Nagar to site of work. (Approx. Distance 0 to 80 Km.) |
| 11 | PCC Pole 8.5 Mtr. Long |
| 12 | 33 KV Line Isolator 800 amp. |
| 13 | 33 KV Bus Isolator 800 A |
| 14 | Lightening Arrestor 33 KV |
| 15 | Battery Set |
| 16 | Battery Charger |
| 17 | LT XLPE Cable 3.5x240 sqmm |
| 18 | AB Cable 3x50 |
| 19 | AB Cable 1x16 |
| 20 | ACSR Weasel Conductor |
| 21 | Transformer 25 KVA |
| 22 | Distribution Box Three Phase |
| 23 | Other matching Materials |
| 24 | Dragging of PCC from dump site to pit site |
| 25 | Fabrication and Errection of Double Pole Support on PCC 8.5 Mtr. including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor) |
| 26 | Fabrication and Errection of Single Pole Support on PCC 8.5 Mtr. including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor) |
| 27 | Stringing, Sagging, Binding and jumpering of ACSR Conductor as per RESSPO Norms |
| 28 | Stringing, Sagging, Binding and jumpering of AB Cable (3x50) & (1x16) Conductor as per RESSPO Norms |
| 29 | Grouting and Binding of Stay with in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms |
| 30 | Earthing of Poles as per RESPO Norms |
| 31 | Mounting of 25 KVA Transformer as per perposed Norms. |
| 32 | Providing and Replacement of Relay |
| 33 | Installation of 33 KV Bus Isolator 800 A |
| 34 | Installation of 33 KV Line Isolator 800 amp. |
| 35 | Installation of Lightening Arrestor 33 KV |
| 36 | Insatalling of Battery & Baterry Charger No |
| 37 | Erection & Commissioning of of 3 Phase/Single Phase Distribution Box with help of clamps (Cost of clamp & Bolt & Nuts shall be borne by contactor ) as per Norms. |
| 38 | Laying of LT XLPE Cable 3.5x240 sqmm in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable) |
| 39 | Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3.5x240 sqmm cable as per RESSPO Norms (cost of all accessories will be borne by contractor) |
| 40 | Construction of Transformer Plinth including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms |
| 41 | Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc. |
| 42 | Earthing by way of boring and lowering of \\"B\\" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.) |
| 43 | Supply and Installation of G.I. Pipe 6'' dia |
| 44 | Connection of L.T. XLPE Cable Different Size |
| 45 | Old and used Control Pannel Site to Store Center Please Enable Macros to View BoQ information |
