|
| 1 | Supply and lay pipe galvanized, “Medium class”, including welding & fittings 80 mm (3”) dia complete all as specified and directed. |
| 2 | Supply and fix Valves, Sluice, flanged of class 1.6 PN, 80 mm (3”) dia complete all as specified and directed. |
| 3 | Supply and fix Non Return Sluice Valve 80 mm dia complete all as specified and directed. |
| 4 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting outgetting out complete all as specified and directed. |
| 5 | Excavation in tranches in hard soil not exceeding 1.5mtr wide and not exceeding 1.5 mtr in depth for laying of pipes in trenches and getting out including levelling of bottom surface and trimming of sides after removal of existing GI/HDPE pipes and fittings complete all as specified and directed. |
| 6 | Returning filling in including spearing levelling, watering and well ramming in layers not exceeding 25 cm thick each excavated soft/hard soil in trenches after the pipes havew been laid and tested complete all as specified and directed. |
| 7 | Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge |
| 8 | Construction of brick masonary valve pit of size 1200x1200x1200mm (Internal dimension) incl necessary earth work and MS sheet 3 mm thick cover with angle iron frame 40 mm x 40 mm x 6mm including provision of suitable hold fasts to hold the frame, locking arrangement and lifting handle, duly painted with two coats of synthetic enamel paint over a coat of red oxide primer all as shown in drg held with GE office incl of tapping of 100 mm GI pipeline from existing 150 mm GI pipeline complete all as specified directed. |
| 9 | S&F Open well horizontal Submersible pump, electric driven 415 V, TP suitable for open sump complete of capacity 10 HP all as specified and directed. Model-KOS-1040+, Make-Kirloskar brother Limited or equivalent in crompton, Kirloskar, KSB. |
| 10 | S&F multistage horizontal Centrifugal pump, electric driven 415 V, TP suitable for 200 metre head and 415 LPM complete all as specified and directed. Make-Kirloskar brother Limited or equivalent in crompton, Kirloskar, KSB. |
| 11 | Supply and fixing fully automatic star delta starter suitable for openwell submersible pump 10 HP capacity, complete all as specified and directed. |
| 12 | Supply and fixing fully automatic star delta starter suitable for multistage horizontal Centrifugal pump set 415 Volts 200 mtr head and 45 LPM, complete all as specified and directed |
| 13 | Providing and fixing Hot compressed molded SMC (sheet molding compound) panel tanks of 50,000 Ltr capacity of size 5.00 m X 5.00 m X 2.00 m of Brand SINTEX, AMITEX, DEVI POLYMERS as per BIS: 14399 Part-I & Part-II. ISI Marked SMC Panel tanks of approved brands. Roof & Base of SMC Panel tanks having panels of size 1.00 m x 1.00 m, 1.00 m x 0.5 m. Side Walls of tanks shall be constructed using SMC panels of size 1.00 m x 1.00 m panel as per site requirement. One manhole of diameter 600mm should be provided on the roof of tank with lockable lid and aluminium ladder above 1mtr height inside & outside the tank for access. Tanks must have vertical iron posts lied firmly with Tie rods. The panel should withstand Hydrostatic pressure of atleast 4 times the working load and should be provided with HDG bolts, nuts, washers, food grade foam gasket, cleats, including PVC pipe support of 110mm dia for the roof of top panels. Tank shall be erected on steel base at site as per manufacurer's specifications & design. Provision of holes for inlet and outlet, overflow should be made as per direction of Engineer-in-Charge and including connecting with 9\\" long thread end Nipple complete all as specified & directed by Engr in Charge. The Tank installation work will be carried out at roof of building/ ground level. Note:- (a) The tanks, panels must be printed with ISI Logo, ISI certification Number, CML Number, Batch Number etc(b) Steel work i.e. Channels used for base frame shall be measured & paid separately. |
| 14 | PCC 1:3:6 type C-2 using 40mm stone agg as in foundation, filling and mass concrete on retaining walls complete all as specified and directed by Engr-in-Charge. |
| 15 | Material and labour for providing PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in platform, filling and mass concrete, complete all as specified ansd as directed. |
| 16 | S&F for pre-painted galvalume aluminum zinc coating GI based plain mild steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed), complete all as specified and directed. |
| 17 | Pre-cast cement concrete hollow block masonry type 1:3;6, exc. 10 cm in width and setting in cement mortar 1:6,complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L rendering 15mm thick on Brick masonary in internal surfaces in CM 1:4 finished even and smooth with sagol finish complete all as specified and directed. |
| 19 | Supply conecting and testing and comissioning complete electric cable PVC insulated and PVC sheathed water proof 3 phase 3 core AC 1100 volts grade 16 sqmm starnded copper conductor suitable for submersible pump including making connection to pump set as well as to control panel complete including taking out old cable all as directed. |
| 20 | Supply conecting and testing and comissioning complete electric cable PVC insulated and PVC sheathed water proof 3 phase 3 core AC 1100 volts grade 10 sqmm starnded copper conductor suitable for submersible pump including making connection to pump set as well as to control panel complete including taking out old cable all as directed. |
| 21 | S&F Rolled sections (Beam, tee, angle, channel or flat sections) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, cleats etc confirming to Fe 410-W (Gde-E- 250) quality-A. complete all as specified. |
| 22 | S&F of HDPE pipe of 75 mm outer dia PN 10 of approved colour with fittings complete all as directed. |
| 23 | S&F of double wall corrugated duct pipe for cable proction 63 mm of approved colour with fittings complete all as directed. |
| 24 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core. |
| 25 | Excavation in tranches in hard soil not exceeding 1.5mtr wide and not exceeding 1.5 mtr in depth for laying of pipes in tranches and getting out including levelling of bottom surface and trimming of sides after removal of existing GI/HDPE pipes and fittings complted all as specified and directed. Note rate of removal of existing GE/HDPE pipes find fitting shall be included in the above items. |
| 26 | Returning filling in including spearing levelling, waering and well ramming in layers not exceeding 25 cm thick each excavated soft/hard soil in trenches after the pipes havew been laid and tested competed all as specified and directed. |
| 27 | Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge |
| 28 | M&L for Sand cushioning on under ground cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable complete all as specified and directed |
| 29 | Supply and lay well burnt class ‘B’ bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench all as specified and directed |
| 30 | M & L for Tubes, 'light grade' 80 mm dia, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors |
| 31 | M&L for Earthing in replacement / renewal complete with galvanised steel earth plate electrode 600x600x6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised strip of size 32 x 6 mm earth continuity coductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR-I 2009, connected to main switch board all as specified. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs, complete all as specified and directed by Engineer - in - Charge. (Earthing for LT Panel) |
| 32 | Supply, install, testing and commissioning LT cubical Panel of outdoor type factory made dust/vermin proof made out of CRCA sheet 3.15 mm thick CPRI approved duly powder coated having opening and locking arrangement both in front and rear side(independent door for each item on front side) mounted on 4 Nos angle iron 50x50x6 mm, 45 cm long embedded in PCC 1:3:6 type C2 complete with aluminium bus bar of rating 1.5 times the rated capacity of incomer, IP 65 protection, suitable cable gland for incomming and outgoing cables with lugs and connections etc required nuts ,bolts and washer incl complete control wiring with suitable size PVC copper conductor cable and provn of cable lugs etc, provision of fixing 02 nos starter for motors. Including provision of following accessories/eqpt incl cable gland etc and suitable for fixing of under mentioned items:-Incommer:-(a) MCCB 250 A, 415 V , 4pole with over load short circuit protection, breaking capacity 35 KA -01(b) On Load Change over switch 250 A, 415 V , 4pole with over load short circuit protection, breaking capacity 35 KA -01(c) Multi function meter for measuring V,A,F,kW,KVA including CTs of suitable capacity -01(d) LED Phase Indication lamp (RYB) -01 Set(e) Single phase preventer(f) Water level autocut for motorOutgoing :-(a) MCCB 100 A, 415 V, 4 pole with over load short circuit protection, breaking capacity 25 KA -02(b) MCCB 63 A, 415 V, 4 pole with over load short circuit protection, breaking capacity 25 KA -02(c) Wiring of above accessory with suitable size of copper conductor cable |
| 33 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 34 | M &L for 25 mm thick PCC 1:2:4 type BO (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge |
| 35 | M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite complete all as specified and directed . |
| 36 | M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed . |
| 37 | M&L PCC (1:3:6) type C-2 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement complete all as specified and directed . |
| 38 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed . |
| 39 | S&F Pre- painted galvatume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 40 | Dismantling structural steel work in cluding doors, gates but excluding framed truss etc complete all as specified and directed. |
| 41 | M&L Roof trusses (framed),trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including Fe 410-W (Gde E- 250) quality A complete all as specified . |
| 42 | Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed. |
| 43 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed. |
| 44 | Taking down chowkhats or frames with shutters not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified & directed. |
| 45 | S and F Steel windows for industrial buildings, fixed type, with glazing bars complete all as specified |
| 46 | S&F Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 47 | M&L for preparation of new painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed. |
| 48 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed. |
| 49 | S & F 35mm second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 50 | Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. complete all as specified |
| 51 | S&F 300mm long aluminium anodised sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple. |
| 52 | S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified |
| 53 | S&F 150mm long aluminium anodised handle fabricated type complete all as specified and as directed by Engineer-In-Charge. |
| 54 | S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by Engineer-In-Charge. |
| 55 | Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed. |
| 56 | S&F 3mm thick glass sheet any size oridinary qlty in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc. |
| 57 | S&F in repairs for Wash basins, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed. |
| 58 | S&F PVC waste pipe 32mm bore with cup and washers for WHB complete on new or old locations. |
| 59 | S&F in repair brass CP Stop cock/ Angle cock 15 mm fancy type choromium platedetc, complete all as specified and as directed. |
| 60 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 61 | S&F in repairs mirror glass of size 0.60X0.450m bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with cromium plated brass screw and cup washer etc complete all as specified and as directed. |
| 62 | S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type,one pair of fixing brackets , 60cm long between flanges complete all as specified and directed. |
| 63 | S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws Soap dish, vitreous China white, ap proximate size 160x 160x90 all as specified and directed. |
| 64 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. |
| 65 | S&F in repairs pillar taps 15mm dia cast copper alloy capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipe and fixed bore of pipe 15mm complete all as specified and direrected. |
| 66 | S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia complete all as specified and as directed. |
| 67 | S&F in repair C.P. grating 100mm square/round with or without hole, complete,all as specified and directed. |
| 68 | S&F in repairs of UPVC floor trap, plain with grating, diameter of outlet in 75mm including jointing to waste pipe fixed with solvent cement. |
| 69 | Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to all store as specified and directed |
| 70 | S & F 500 Ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 71 | S & F in repair 20mm bore of pipe PP-R Ball valves (brass insert) as per requirement of the site, complete, all as as specified and directed. |
| 72 | S & F in repair 20mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site, complete, all as as specified and directed. |
| 73 | Taking up or down 15 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 74 | Taking up or down 20 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 75 | Taking up or down 25 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 76 | S&F 16mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 77 | S&F 20mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 78 | S&F 25mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 79 | Dismantling of cast iron ,PVC or reinforced concrete pipes 110 mm/ 75mm dia bore jointed in cement mortar and taking out of trenches if reqd of any dia |
| 80 | S & F 75mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed. |
| 81 | S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed. |
| 82 | S & F 75 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 83 | S & F 110 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 84 | S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed. |
| 85 | S & F 75 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed. |
| 86 | S & F 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls |
| 87 | S & F 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls |
| 88 | Demolition of precast concrete block walling built in cement morter complete all as directed. |
| 89 | M&L for precast cement concrete block masonary walling type C-I 1:3:6 using 20mm graded aggregate with solid blocks, exc. 10 cm in width and setting in CM 1:6 complete. |
| 90 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 91 | M & L for rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed. |
| 92 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 93 | M & L for preparation of old plaster surfaces of wall any description, not otherwise described and applying two coats of distemper with distemper oil emulsion complete all as specified and directed. |
| 94 | M & L for preparation of old plaster surfaces of any description, not otherwise described, applying two coat of cement base paint (first quality) complete all as specified and directed. |
| 95 | Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc including making good to the disturbed surfaces of wall, roof and floor etc to match with the existing surfaces complete all as specified and directed by Engineer-in-Charge. |
| 96 | M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc. all as specified for one light point/ fan Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 97 | All as per Srl item No 96 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 98 | All as per Srl item No 96 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 99 | All as per Srl item No 96 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with other switches with cable 2.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 100 | Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, Make :ANCHOR or equivalent. |
| 101 | Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge. Make :ANCHOR or equivalent |
| 102 | Supply and fixing switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, Make :ANCHOR or equivalent |
| 103 | Supply and fixing socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge. Make :ANCHOR or equivalent |
| 104 | M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. Make :ANCHOR or equivalent. |
| 105 | S/F in replacement LED integrated batten tube light fittings 20W 4 Feet long complete with twin core twisted flexible copper conductor cable complete all as specfied and directed. Make Crompton Model -Trimline LDL-20CDL or equivalent in Philips/Bajaj / Wipro. |
| 106 | Supply and fix Bajaj LED Bulk head light fittings, 10 W cool white, color temperature 3500-4100K wall mounting type complete all as specifed and directed of equavalent make : CG/Philips/wipro etc. |
| 107 | M & L lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting type complete all as specifed and directed of equavalent make : CG/Philips/wipro etc. |
| 108 | Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and directed by Engineer-in-Charge . |
| 109 | Supply and fixing in replacement of isolator SPN 40 amps 230V complete all as specified and direct by Engineer-in-Charge . |
| 110 | S&F in replacement of MCB SP 6 Amp to 32 Amp, 240 Volts , 10 KA. Make : Havells / Legrand/ Sehneider/L&T or equavalent approved Make. |
| 111 | Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm complete |
| 112 | M & L for Earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia earth continuity coductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR-I 2009, connected to main switch board all as specified and including testing on completion. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20 mm dia GI Pipe medium grade, funnel with wire mesh and lugs GI Pipe of 15 mm dia of light grade upto 7.5M for protection of earth wire complete all as specified and directed by Engineer - in - Charge. |
| 113 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm → |
| 114 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. → |
| 115 | Schedule of Credit Please Enable Macros to View BoQ information |
