|
| 1 | Dismantling roof treatment of any description including cement mortar bedding(But not backing)cleaning the surface by blowing,washing and rubbish off the premises complete all as directed. |
| 2 | M&L App based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforment with polyster non woven fabric (wt reinforcement not less than 150 gms/sqm) laid on primed surfaced application complete all as apecified and directed (Primer should be measured and paid as per Item above). |
| 3 | M&L for10 mm thick rendering on fair faces of brick works / Concrete surfaces finished even and smooth without using extra cement in cement mortar 1: 3complete all as specified and as directed |
| 4 | M&L for priming evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sq.m including cleaning the surface. |
| 5 | M&L applaying two coat of Aluminium paint over APP Membrane complete all as apecified and directed. |
| 6 | Cutting out cracks to V section in existing roofs or terracing ,cleaning out ,wetting, grouting with cement and sand slurry 1:3 |
| 7 | M&L for 25mm thick PCC type B0 (1:2:4) using 12.5 mm graded crushed aggregate in padding concrete and the like all as specified and directed. |
| 8 | Dismantling plain or corrugated steel /fibre/AC sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed |
| 9 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 10 | S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed. |
| 11 | S&F MS Wind ties for roof including securing bolts, posts & struts including cutting tops to shapes as directed,including all necessary drilling,bolting or reveting etc and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed. |
| 12 | S&F Pre- painted galvalume aluminium zinc coating GI based seme corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall ,fixe with self tapping screws and all as specified and as directed. |
| 13 | S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall ,fixe with self tapping screws and all as specified and as directed. |
| 14 | M&L applying two coats of synthetic enamel painting to new surfaces steel of any description surface over a coat of red oxide primer exc. 10 cm width/girth complete all as specified and directed |
| 15 | Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed |
| 16 | M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:4 all as Specified |
| 17 | Taking down cement plaster any description on brick/stone or concrete walls, etc including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 18 | M&L for 10mm thick rendering on fair faces of brick works finished even and fair without using extra cement in cement mortar 1: 4 complete all as specified and as directed |
| 19 | Supply only Liquid water proofing copmpund in respect of the Item above. |
| 20 | M&L for 15 mm thick rendering on unfair faces of brick works finished even andfair without using extra cement in cement mortar 1:6 complete all as specified and as directed |
| 21 | M&L for preperation of new plastered wall surface of any description and applayng two coats of cement based paint over a coat of primer complete all as specified and as directed. |
| 22 | M&L for preperation of new concrete /plastered surface of any description, two coat of destemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed. |
| 23 | Demolition of cement concrete in ground floor and pavings n'exc 15cm thickness (below or above ground level complete all as specified and as directed). |
| 24 | M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement |
| 25 | M&L Forming Contraction (Dummy) joints 75 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'B' in plinth protection |
| 26 | M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in sub floor or hard standing rough finished surface all as specified and directed |
| 27 | M & L for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded aggregate as in floors or hard standing rough finished surface all as specified and directed |
| 28 | Demolition of stone slabs and chequered tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar. |
| 29 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises |
| 30 | M & L for 25mm thick PCC 1:2:4, type B-0, (using 12.50 mm graded stone aggregate) as in under layer of tile flooring & finishing the surfaces rough to receive screed bed complete as specified and directed. |
| 31 | M&L for Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. |
| 32 | M&L for glazed ceramic coloured tiles in vertical surfaces of size 350X250X7/450X350X7 mm thick set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as dado/skirting and facea of side bldg over & including 10mm thick rendering in CM(1:4) complete all as specified and as directed. |
| 33 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in floor, over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. |
| 34 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in skirting, over 10mm thick screed bed in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. |
| 35 | M&L for machine cut mirror polish kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed. |
| 36 | M&L for machine cut mirror polish kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed. |
| 37 | M & L for rendering 10mm thick in cement mortar (1:3) on fair faces of brick work and finishing the surface even and smooth with WPC without using extra cement as in sunken floor and wall complete all as specified and as directed. |
| 38 | Supply only integral water proofing compound |
| 39 | M & L for applying two coats of water proofing coating by using super latex manufactured by pidilite industries limited (or equivalent product manufactured by Sika/fosroc/choksey chemical), water and cement ratio 1:4:7 or the ratio as instructed by manufacturer on sunken floor and wall complete all as specified and as directed. |
| 40 | Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed |
| 41 | M&L Anodised aluminium snap grid frame work for false ceiling of grid size 605 x 605 mm including necessary hanger wires as per manufacturers specification complete all as specified |
| 42 | Providing and fixing Gypsum Board 600 x 600x10mm thick in ceiling fixed with screw as per manufacturers instructions |
| 43 | Taking down steel tubing ( 15mm bore) and connections in any position including cleaning for refixing or removal to store complete all as directed by Engr-in-charge. |
| 44 | Taking down steel tubing ( 20mm bore) and connections in any position including cleaning for refixing or removal to store complete all as directed by Engr-in-charge. |
| 45 | Supply and laying and concealed for 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc) on walls/ceiling or laying in floors complete all as specified and directed |
| 46 | S&F GI tubing of 20mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by the Engr-in-C. |
| 47 | Refixing 15mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) |
| 48 | Refixing 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) |
| 49 | Cutting chase, pinning in making good to faceing where required and pointing in cement mortar 1:3 to ends or edges of landing, and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10cm but n exc 20cm. |
| 50 | S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) 500 Ltr capacity hoisted and fixed in position including removal of existing damaged water tanks all as specified in SSR Part I |
| 51 | S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) 1000 Ltr capacity hoisted and fixed in position including removal of existing damaged water tanks all as specified in SSR Part I |
| 52 | S & F in repairs 20 mmBrass valves ,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed |
| 53 | S&F in repairs bib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap). |
| 54 | S & F in repairs 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe..(Cat pat No- F100001 of Hindware) |
| 55 | S&F in repairs Angle stope valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated with long shank and cup (concealed type), 15mm bore dia of pipe. complete all as directed by Engr-in-charge. |
| 56 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 57 | S & F in repair Vitreous China wash basin, white, flat back, size 550 x 450mm including brackets all as specified and directed. |
| 58 | S&F in repairs Vitreous China bowl Urinal, flat back, size of 465x355x265mm white with grating and union for discharge pipe and PTMT waste coupling with waste pipe (excluding flushing cistern, flush pipe and waste pipe) |
| 59 | S&F in repairs Vitreous china wash down water closet scouting pattern, white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device including trap set and necessary concrete complete. |
| 60 | S&F in repairs Vitreous China Sqatting pan Orissa Pattern Indian Type Size 580 x 440 with integral foot rest (excluding flushing cistern and flush pipe). Colour as desided by Engneer-in Charge. |
| 61 | S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed. |
| 62 | S&F in repairs waste pipe of polyethylene of low or high density or PVC ,32 mmdia for urinal/wash basin/Kitchen sink/ flush tank complete all as directed by Engr-in-charge. |
| 63 | S&F in repairs PVC connection pipe suitable for connecting flushing cistern and WHB etc 450mm long complete all as specified and directed. |
| 64 | S & F in repairs, waste coupling of PTMT 32mm bore for urinal / wash basin (Half or full threaded ) (Minimum Weight 45 grams) |
| 65 | S & F in repairs floor gratings 100mm dia with o without waste hole of PTMT (mim waight 40 grms) all as directed by the Engr-in-Charge |
| 66 | S&F in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with cromium plated brass screws and cup washers complete all as specified. |
| 67 | S&F in repairs 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement |
| 68 | S&F in repairs 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors all as specified |
| 69 | S&F in repairs 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints fixed to wall including necessary MS flat Iron clamps of size (40 x 4mm) all as specified and as directed by the Engineer - in - Charge. |
| 70 | S&F 75 mm bore. PVC (SWR) bends |
| 71 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches |
| 72 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including necessary MS flat Iron clamps of size (40 x 4mm) all as specified and as directed by the Engineer - in - Charge. |
| 73 | S&F 110 mm PVC (SWR) bend any radius |
| 74 | S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access door |
| 75 | S & F in repair stainless steel kitchen sink 1mm thick over all size 495 x 420mm bowl size 410 x 330x 160mm. |
| 76 | S&F in repairs 20 mm dia, harrison rails, Anodised aluminium alloy with fixing brackets, stops, rollers etc complete as specified and directed. |
| 77 | S&F in repairs Stainless steel Kitchen Sink coupling 100/125mm dia all as specified and directed |
| 78 | S&F in repairs PVC syphon with rod, flushing wiser, for low level flushing cistern incl PVC handle with adjustable lever (flushing cistern kit )complete all as specified |
| 79 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge. |
| 80 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge. |
| 81 | Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed by Engr-in-charge. |
| 82 | Taking down shutters of any description area not exceeding 1 Sqm each complete all as directed by Engr-in-charge. |
| 83 | Taking down shutters of any description area not exceeding 1 Sqm each easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge. |
| 84 | Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each easing & adjusting and refixing in the same opening complete all as directed by Engr-in-charge. |
| 85 | S&F 2nd class hard wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete(Glass shall be measured Seperately) all as directed by Engr-in-Charge. |
| 86 | S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by the Engr-in-Chage |
| 87 | Material & labour PCC (1:3:6) type B0 (using 12.5 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge. |
| 88 | Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixings lugs,excluding hinges,lock strike plate,etc,complete ,as specified ,supplied and fixed.(PCC filling of holloow section measured and paid seprately) |
| 89 | Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixings lugs,excluding hinges,lock strike plate,etc,complete ,as specified ,supplied and fixed.(PCC filling of holloow section measured and paid seprately) |
| 90 | M & L PCC type C-1,1: 3:6 (20mm graded stone aggt) for cills,hold fast filling of hollow of pressed steel door frame etc |
| 91 | S&F for 30 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats , complete all as directed by Engr-in-charge. |
| 92 | S&F 30 mm 2nd class hard wood Glazed and skelton door or window shutter, open and prapared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately) complete all as specified and as directed by the Engr-in-Charge.. |
| 93 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge. |
| 94 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge. |
| 95 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. |
| 96 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus ofelasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: including stainless steel butt hinges and necessary S Sscrews) |
| 97 | S&F MS framedwork such as grills, gratings etc with ends of bars shouldered and/or rivited or forged in spikes, framed guard bars, barred iron doors, ledders framed balsters walk ways railings frame work of water tanks and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed. |
| 98 | M&L for Powder Coated (Minimum thickness of powdercoating 50 micron) Anodised aluminium frame of standerd section for doors, windows, ventilators and partitions with double rebates including joining cleat for fixing etc. complete all as specified |
| 99 | M&L for Powder Coated (Minimum thickness of powdercoating 50 micron) Anodised aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured and paid seperately) complete all as specified |
| 100 | M&L sheet glass 4.8mm thick ordinalry quality and glazing with aluminium beeds in square exc 0.50 sqm in each pane complete all as specified and as directed |
| 101 | M&L 9mm thick Prelaminated particle board ,exterior grade having decoratie choice lamination on both sides fixed with aluminium beadings on aluminium frame work all as specified and directed. |
| 102 | S&F aluminium powder coated three track sliding window with two shutters of 5mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh including good quality of bearing handle, locks, PVC rubber lining including frame work etc complete all as specified. :-Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606,Interlocking – 20605, Top and bottom – 20604. |
| 103 | M&L for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section including glass and stainless steel wire mesh including frame work etc complete all as specified and directed by Engineer-in-Charge. |
| 104 | Hacking old broken glass (any thick ness, size, quality or description) from aluminium/steel/wooden frame work or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed . |
| 105 | M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 106 | S&FGalvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. |
| 107 | S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. |
| 108 | M&L in repairs 19/20 mm thick prelaminated particle board, exterior grade, prelimated both sides with decorative cation and fixed with screws to timber frame work including teakwood lipping 6 mm thick fixed withj nails in repairs. |
| 109 | S&F in repairs Aluminium (extruded section) door closer hydraulically regulated ,designation No.3, universal type, suitable for door shutter of 851 to 1000mm in width and of weighjt between 61 to 80 Kg all as specified and as directed. |
| 110 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box ,main body with stainless steel cover,governing pivot made of brass, other plates made of mild steel heavy duty. |
| 111 | S&F in repairs 100mm Aluminium Mortice lock 2 livers vertical type complete all as specified and as directed. |
| 112 | S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed. |
| 113 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 114 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 115 | S&F mild steel butt hinges, medium weight cold rolled 75mm size complete all as specified and as directed. |
| 116 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 117 | S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 118 | S&F in repairs mild steel ordinary rat tail rod pattern springsof size upto 300mm long including roller and roller plate complete all as specified and as directed. |
| 119 | S&F Aluminium alloy anodised ,sliding door bolt 250mm with hasp,staple(bolt type) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast, aluminium alloy complete all as specified and as directed. |
| 120 | Supply and Fixing 500/1000 ltrs tank covers (lid) all as specified and directed. |
| 121 | M&L preparing newly wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Please Enable Macros to View BoQ information |
