|
| 1 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 2 | M &L for 25 mm thick PCC 1:2:4 type BO (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge |
| 3 | M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite complete all as specified and directed . |
| 4 | M & L for Virified Ceramic tiles Light shed 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the joints and complete all as specified and as directed. |
| 5 | M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed . |
| 6 | M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed . |
| 7 | M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed . |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises |
| 9 | M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over rendering 10mm thick in cement plaster 1:6 on concrete surface/block masonary/stone masonary or other surfaces complete all as specified and as directed.Notes : Shade of the tile including colour, design and pattern shall be approved by AGE. |
| 10 | M&L PCC (1:3:6) type C-2 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement complete all as specified and directed . |
| 11 | M&L for machine cut kota stone slab flooring 20-25mm thick mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 12 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed over rendering 10mm thick in cement plaster 1:6 on concrete surface/block masonary/stone masonary or other surfaces complete all as specified and as directed. |
| 13 | M & L for 100 mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in surface of hardstanding finished even and smooth without using extra cement including spike rolling to surface or making impression of expanded metal, whilst the concrete is green complete all as specified and directed. |
| 14 | M & L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed. |
| 15 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed . |
| 16 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed . |
| 17 | S&F Pre- painted galvatume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 18 | Ditto as per above item but except sheet |
| 19 | S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roof ,walls etc with grade of zinc coating 275. complete all as specified and as directed. |
| 20 | S&F 0.63 mm thick Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) |
| 21 | Ditto as per above item but except sheet |
| 22 | Dismantling structural steel work in cluding doors, gates but excluding framed truss etc complete all as specified and directed. |
| 23 | M&L Roof trusses (framed),trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including Fe 410-W (Gde E- 250) quality A complete all as specified . |
| 24 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 (Gde-E- 250) quality-A) complete |
| 25 | S&F 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 26 | M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick including screed bed 20mm thick in (CM 1:6) , with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors. |
| 27 | Demolition of precast concrete block walling built in cement morter complete all as directed. |
| 28 | M&L for precast cement concrete block masonary walling type C-I 1:3:6 using 20mm graded aggregate with solid blocks, exc. 10 cm in width and setting in CM 1:6 complete. |
| 29 | M/L for PCC 1:2:4 type B1, using 20mm graded stone aggregated as in plinth band, lintel band, roof band , lintel bands ,copings and other similar bands etc all as directed by Engr-in-Charge at site. |
| 30 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 31 | M & L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 ,and finished even and smooth without using extra cement complete all as specified and directed. |
| 32 | M & L for rendering 15mm thick in cement plaster 1:4 on on fair faces of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed. |
| 33 | M & L for preparation of surfaces of new plaster surface of wall and applying two coats of oil emulsion distemper over a coat of chalk whiting , on plastered surfaces, preparatory to distempering complete all as specified and directed. |
| 34 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 35 | M & L for preparation of old plaster surfaces of wall any description, not otherwise described and applying two coats of distemper with distemper oil emulsion complete all as specified and directed. |
| 36 | M & L for preparation of old plaster surfaces of any description, not otherwise described, applying two coat of cement base paint (first quality) complete all as specified and directed. |
| 37 | Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed. |
| 38 | Taking down shutters of any description n. exc 1 sqm each complete all as specified & directed. |
| 39 | Taking down chowkhats or frames with shutters not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified & directed. |
| 40 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed. |
| 41 | S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete. |
| 42 | S&F Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 43 | Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required |
| 44 | S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 45 | S and F Steel windows for industrial buildings, fixed type, with glazing bars complete all as specified |
| 46 | S & F 35mm second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 47 | S & F 35mm second class hard wood Glazed and Skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified in SSR Pt-I Section 8, clause 8.24 (a) complete all as specified and directed. |
| 48 | Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. complete all as specified |
| 49 | Preparation of old or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of Synthetic enamel paint . complete all as specified |
| 50 | M&L for preparation of new painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (first quality) complete all as specified and directed. |
| 51 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed. |
| 52 | S&F power coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 53 | S&F power coated aluminium window & ventilator shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified |
| 54 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 55 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. complete all as specified |
| 56 | M&L for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed. |
| 57 | Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed. |
| 58 | S&F 3mm thick glass sheet any size oridinary qlty in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc. |
| 59 | M&L for 5.5mm thick sheet glass in squares exceeding .50 Sqm in each pane with oil putty in complete all as specified & directed. |
| 60 | S&F 300mm long aluminium anodised sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple. |
| 61 | S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified |
| 62 | S&F 150mm long aluminium anodised handle fabricated type complete all as specified and as directed by Engineer-In-Charge. |
| 63 | S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by Engineer-In-Charge. |
| 64 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, size 140 mm, complete,all as specified and directed. |
| 65 | S&F 300mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate, complete all as specified and directed. |
| 66 | S&F door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed, complete,all as specified and directed. |
| 67 | S & F in repairs 20 mm dia Aluminium alloy anodised curtain rails with brackets and bullab fixed, complete all as specified and directed. |
| 68 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness inclduding cover fillets.complete all as specified and directed by Engr-in-charge. |
| 69 | Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in framed work.complete all as specified and directed by Engr-in-charge. |
| 70 | M&L 2nd class hard wood in scantling timber framed work fixed clean sawn directed complete all as specified and directed by Engr-in-charge. |
| 71 | M&L 6 mm thick decorative veneered decorative plywood,grade 1 (with BWR resin) with decorative face veneers on one faces fixed with screws to timber frame workith screws to timber frame work in ceiling etc complete all as specified and as directed. |
| 72 | M&L for 9 mm thick decorative veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces fixed with screws to timber frame work as in wall pannelling/ceiling/cup board shutters complete all as specified & directed. |
| 73 | S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq. cm |
| 74 | S&F in repairs for Wash basins, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed. |
| 75 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed. |
| 76 | S&F in repairs vitreous china Orissa pattern size 580mm x440mm white with ‘P’ or ‘S’ trap front or back inlet and foot rest any pattern complete all as specified and directed. |
| 77 | S & F in repairs Vitreous China Half stall type urinals, white, with geating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe, complete, all as specified and directed. |
| 78 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low levelcistern complete all as specified and directed. |
| 79 | S & F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 80 | S&F PVC waste pipe 32mm bore with cup and washers for WHB / Urinal complete on new or old locations. |
| 81 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 82 | S&F in repairs mirror glass of size 0.60X0.450m bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with cromium plated brass screw and cup washer etc complete all as specified and as directed. |
| 83 | S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type,one pair of fixing brackets , 60cm long between flanges complete all as specified and directed. |
| 84 | S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws Soap dish, vitreous China white, ap proximate size 160x 160x90 all as specified and directed. |
| 85 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. |
| 86 | S&F in repair brass CP Stop cock/ Angle cock 15 mm fancy type choromium platedetc, complete all as specified and as directed. |
| 87 | S&F in repairs pillar taps 15mm dia cast copper alloy capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipe and fixed bore of pipe 15mm complete all as specified and direrected. |
| 88 | S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia complete all as specified and as directed. |
| 89 | S&F in repairs 15mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipes of make-Prayag ( min wt 90grms) |
| 90 | S&F in repairs 15mm dia pillar tap of PTMT any colour high pressure screwed for iron pipes of make-Prayag ( min wt 110grms) |
| 91 | S&F in repair C.P. grating 100mm square/round with or without hole, complete,all as specified and directed. |
| 92 | S&F in repairs of UPVC floor trap, plain with grating, diameter of outlet in 75mm including jointing to waste pipe fixed with solvent cement. |
| 93 | Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to all store as specified and directed |
| 94 | S & F 500 Ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 95 | S & F PUF insulated cylindrical tank of capacity 500 ltrs vertical type double layer duly filled with PUF insulation superior quality to resist in temperature - 30 to + 35 degree cenfigrade and hoisted on platform complete with making pipe line connection, complete, all as as specified and directed. |
| 96 | Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to all store as specified and directed |
| 97 | S & F 1000 Ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 98 | S & F PUF insulated cylindrical tank of capacity 1000 ltrs vertical type double layer duly filled with PUF insulation superior quality to resist in temperature - 30 to + 35 degree cenfigrade and hoisted on platform complete with making pipe line connection, complete, all as as specified and directed. |
| 99 | S & F in repair 20mm bore of pipe PP-R Ball valves (brass insert) as per requirement of the site, complete, all as as specified and directed. |
| 100 | S & F in repair 20mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site, complete, all as as specified and directed. |
| 101 | Taking up or down 15 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 102 | Taking up or down 20 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 103 | Taking up or down 25 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 104 | S&F 16mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 105 | S&F 20mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 106 | S&F 25mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 107 | Schedule of Credit Please Enable Macros to View BoQ information |
