|
| 1 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed. |
| 3 | Taking down shutters of any description exceeding 1 Sqm but not exc 2.0 Sqm each complete all as specified and as directed. |
| 4 | Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed |
| 5 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed. |
| 6 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed. |
| 7 | Dismantling of wall and ceiling boards (fibre, pulp, insulationetc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets Complete all as specified and as directed . |
| 8 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed. |
| 9 | M & L prepainted galvanume aluminium zine coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws complete all as specified and as directed by Engr-in-charge. |
| 10 | M & L prepainted galvanume aluminium zine coating GI based plain steel sheeting 0.50 mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws Complete all as specified and as directed by Engr-in-charge. |
| 11 | M & L for precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 12 | M & L for 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed. |
| 13 | S&F coloured non skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match shade of the tiles complete all as specified & directed.Notes : Shade of the tile including colour, design and pattern shall be approved by AGE. |
| 14 | S&F coloured non skid ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc, set and jointed in neat cement slurry and pointed in white cement to match shade of the tiles over 10 m thick rendering in CM 1:6 complete all as spd & directed. |
| 15 | M&L Non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and directed . |
| 16 | M&L coloured glazed ceramic tiles in vertical surfaces 300x 450 x7/8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including 10mm thick rendering in CM 1:4 as in backing coat complete all as specified and directed. |
| 17 | S&F hangers 6mm dia G.I. (upto 1200mm length ) adjusting level, size of grid 605mm X605mm, fixed to steel purlins or rafter with nexc 60cm long and 6mm dia adjustable as on site requirement etc complete all as specified and as directed by Engr-in-charge. |
| 18 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mmthick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. size of grid 605mm X605mm complete all as specified and directed. |
| 19 | S&F 6 mm thick non asbestos fiber cement ceiling building board (Designer ceiling board) , fixed to aluminium or MS galvanised snap grid frame work with screw in ceiling complete all as specified. |
| 20 | Taking down cement plaster any description from stone wall, brick wall parapets including raking out joints hacking for key and scrubbing down with water etc complete all as specified . |
| 21 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finish the surface even and smooth without using extra cement all as specified and as directed . |
| 22 | M & L for preparing new plastered surfaces and applying two coats of cement base paint on surfaces of walls over one coat of white wash complete all as specified and directed by engr in charge. |
| 23 | M&L preparing newly plastered surfaces of wall and applying complete wall with 1.5 mm wall putty and making smooth surfaces and applying two coats of oil bound distemper over a coat of primer all as specified and directed. |
| 24 | M&L for prepaire old decorative surface and applying two coats of oil bound distemper on walls surface etc complete all as specified and as directed . |
| 25 | Material and labour for applying one coat of synthetic enamal paint to wooden surface exceeding 10cm widht or girth including preparation of old painted wooden ceiling surfaces complete all as specified and as directed. |
| 26 | Material and labour for applying one coat of synthetic enamal paint on old steel surface of any description over 10cm widht or girth including preparation of old painted surfaces/ roof sheet complete all as specified and as directed. |
| 27 | M & L for old decorative surfaces, preparation of wall and applying two coats of cement base paint complete all as specified and as directed by Engr-in-charge. |
| 28 | M & L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat synthetic enamel paint complete all as specified. |
| 29 | M&L for 50 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of flooring finished the surface even & fair all as specified. |
| 30 | M&L for chequered cement concrete tiles 25mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement incl 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed . |
| 31 | M & L for providing cement concrete cas in situ 1:2:4, type B1 (using 20mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edge including use of formwork complete all as specified and directed by engr in charge. |
| 32 | M&L 75 mm thick cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections, finished even and smooth w/o using extra cement complete all as specified and directed. |
| 33 | S&F pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including back filling .,complete all as specified and directed . |
| 34 | Supply and fix steel windows with side hung shutters, box type hinges with steel handle and steel peg stay complete with glazing bars for glazed shutters, dovetailed or welded complete all as directed by Engineer-in-charge. |
| 35 | Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003 (Pt-I), kiln seasoned and chemically pressure treated etc. complete all as specified and as directed. |
| 36 | Supply and fix 30mm thick factory made 2nd class hard wood glazed and skeleton window shutters, open rebated and prepared to received glass / gauge etc (with sash bars) divided in squares with plain, chamfered or rounded and mitred, and rebated sash bar any number for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (b) complete all as specified and as directed. |
| 37 | M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed. |
| 38 | Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane fixed to wooden frame complete all as specified and as directed |
| 39 | Supply & fixing in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm & fixed with tinned tacks, or galvanised wire staples. & directed by Engr-in-charge. |
| 40 | S & F Mild steel butt hinges medium weight , cold rolled, 100mm, ISI marked, complete all as specified and as directed by Engr-in-charge. |
| 41 | Supply and fix 75 mm size butt hinges, medium weight, cold rolled mild steel ((ISI marked) complete all as specified and as directed. |
| 42 | M&L Aluminium anodised, barrel tower bolts of extruded section and fixed of size 200 mm complete all as specified and as directed. |
| 43 | Supply and fixed 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 44 | S&F 150 mm long aluminium anodised handles or extruded section complete all as specified and directed. |
| 45 | Supply and fix 100mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed. |
| 46 | S&F 300 mm long Aluninium alloy, anodised , sliding door bolt with hasp , staple, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 47 | S&F floor door stopper 140 mm of aluminium alloy body and tongue anodised with hard drawn steel spring complete all as directed. |
| 48 | S&F in repair 20mm dia curtain rods fancy type, mild steel chromium plated with fixing brackets, stops, rollers complete all as specified and as directed.. |
| 49 | M&L for RCC Nominal mix1:2:4 type B-1, ( using 20 mm graded stone aggregate ) as in beams, cantilevers, lintels over 1.5m span etc complete al as specified and as directed. |
| 50 | M & L for RCC Nominal Mix 1:1.5:3 type A 1(using 20 mm graded stone aggregate) in Chajjas/ slab cover etc complete all as specified & directed. |
| 51 | M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, lintels, etc. and beams in rough finished flat surface of concrete complete all as specified and directed. |
| 52 | M & L for Use and waste formwork to chajjas, through and similar items including edges, all as specified and directed. |
| 53 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 54 | M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 55 | Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.. |
| 56 | Taking up or down 20m bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed . |
| 57 | S&F 15mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or laid in floors complete all as specified and directed . |
| 58 | S&F 20mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or laid in floors complete all as specified and directed. |
| 59 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), EWC, white including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover etc complete all as specified and directed . |
| 60 | S&F in repair 10 ltr capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including brackeet and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed |
| 61 | S&F in repair vitreous china wash basin , white , flat back, size 550 x 400 mm with padestal excluding taps, waste chain and plug and porcelain stopper but including brackets , waste coupling complete all as specified and directed by engr in charge. |
| 62 | S&F in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 63 | S&F in repair 15mm dia stop valve / angle valve chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union complete all as specified and directed . |
| 64 | S&F in repair 15 mm dia pillar taps Mixture , cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with 'Hot' or 'Cold' woth long shanks and flynuts, screwed for iron pipe complete all as specified and directed . |
| 65 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as spd & directed . |
| 66 | M & L PVC floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 67 | S&F 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by engr in charge. |
| 68 | S&F 110mm PVC (SWR) bend any radius complete all as specified and directed . |
| 69 | S & F 75 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors /wall complete all as specified and directed. |
| 70 | S & F 75 mm dia bore PVC (SWR) bends any radius complete all as specified and directed. |
| 71 | M&L 75mm PVC(SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed . |
| 72 | S&F 75 mm PVC(SWR) vent cowl complete all as specified and directed. |
| 73 | S & F toilet paper holder box type fixed to wall with chromium plated brass screws complete all as specified and directed by engr in charge. |
| 74 | S&F in repair soap dish embedded in the wall.complete all as specified and directed . |
| 75 | S & F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. |
| 76 | S&F in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 77 | S & F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 78 | S & F for 600mm x 450mm bevelled edge mirror or selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chroimium plated brass screws and cup washers complete all as specified. |
| 79 | S & F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks of Fe 410W (Gde-E-250) and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, etc. complete all as specified |
| 80 | S&F 1000 ltr. capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old water tank in complete all as specified in SSR Part- I complete all as specified and directed. |
| 81 | S&F 20mm bore ball valve high pressure of PTMT with epoxy coated alluminium rod and high density plastic ball secrewed for iron pipe and fixed complete all as specified and as directed. |
| 82 | S&F 20 mm dia of pipe gun-metal, globe or gate valvees with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr In Charge. |
| 83 | Surface excavation n exc. 30 cm deep and averaging 15 cm deep and getting out hard dense soil complete |
| 84 | Sand filling under floors including watering and consolidation all as specified and directed. |
| 85 | M&L Machine pressed precast concrete interlocking coloured paver block any shape and size confirming to IS 15658-2006of 60 mm thickness, M-35 Grade joints filling with grey cement and pigment Complete all as specified and directed . |
| 86 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by Engineer-In-Charge. |
| 87 | Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith complete fittings such as switches, ceiling roses,pendents, regulators sockets, light fittings , holder, bell push, ding dong etc including making good to the disturbed suefaces of walls, floor etc to match with the existing surface complete all as specified and directed by Engineer in Charge. |
| 88 | M&L for point wiring complete with 1.5 sqmm single core PVC insulated FRLSH cable 1100 cable volts grade with multi stande copper conductor drawn through and including non metallic rigid PVC casing caping medium grade ISI Marked and all casing caping accessories fixed on wall/fixed to roof/truss/column ect and including provision of 1.5 sqmm PVC insulated copper cable FRLSH as earth continuty conductor, febricated branded modular metal flush box duly make embossed, conncealed in walls with suitable modular inner and outer plate for housing modular switches, socket outlet and fan regulator etc. all as specified for one light point/ fan Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 89 | All as per Srl item No 88 here-in-before but controlled with one 3 pin socket outlet 5 Amp, independent board with other switches with cable 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 90 | All as per Srl item No 88 here-in-before but controlled with one 3 pin socket outlet 5 Amp, Same board with other switches with cable 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 91 | All as per srl item no 88 here-in-before but controlled with one 3 pin socket 15 Amp on the independent board with other switches with cables 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply and fixing in replacement of socket modular type outlet 5 pin 5 Amp, 2 in 1 230 Volt, complete all as specified and directed by Engineer -in-Charge, |
| 93 | Supply and fixing in replacement of switch modular type 5 Amp, 230 Volt, single pole one way complete all as specified and directed by Engineer -in-Charge. |
| 94 | Supply and fixing in replacement of switch modular type 15 Amp, 230 Volt, single pole one way complete all as specified and directed by Engineer -in-Charge. |
| 95 | Supply and fixing in replacement of socket modular type outlet 5 pin 15 Amp, 2 in 1 230 Volt, complete all as specified and directed by Engineer -in-Charge, |
| 96 | Supply and fixing in replacement of surface & wall mounted LED 20 W tube light fitting 4 feet with high quality material and design, extruded aluminium housing enhances safety. High quality PC diffuser, reliable and robust housing structure, maximize the endurance over the life time slim integrated disign, easy to install efficiancy 125 limen/watt all accessories as specified and directed by Engg-in-Charge. |
| 97 | Supply and fixing in replacement LED integrated batten tube light fittings 10W 2 Feet long complete with twin core twisted flexible copper conductor cable complete all as specfied and directed. |
| 98 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 99 | Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter AC, single phase 230/240 V 300mm sweep 1200 RPM, with louvre complete all as per specified and directed by Engineer in Carge. Note : Fixing of Exhaust Fan on wall wiht suitable size anchor bolt, making hole in wall for grouing and making good the disturbed suface including plaster work shall be part of hob at no extra cost. |
| 100 | Supply and Fix in replacement of Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. |
| 101 | Supply and fixing in replacement of lamp holder, PVC/ Polycorbonate type with back plate suitable for batten fittings. |
| 102 | Supply and fixing in replacement of LED Lamp 12 Watt energy saving upto 80%, BEE rated with all accessories all as specified and directed. |
| 103 | Supply and fix in replacement of stepped type electronic fan regulator modular type 120 W 2 Module type on the existing phenolic laminted sheet etc all as specified and directed by Engr-In-Charge. |
| 104 | Supply and fix in replacement of LED Bulk head light fittings, 10 W complete. |
| 105 | Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 12 way 240 volt complete all as specified and direct by Engineer-in-Charge . |
| 106 | Supply and fixing in replacement of miniature circuit breaker (MCB) SPN 40 AMP rating 240V, 10KA complete with connection testing and commissioning |
| 107 | Supply and fixing in replacement of MCB SP 6 to 32 AMP, 10 KA Complete with connection testing and commissioning. |
| 108 | Supplying and fixing 1100 volts grade heavy duty, XLPE aluminium cable, in service connections, twin core 10 sqmm circural cable, comlete all as per soecified and directed by Engineer in Charge. |
| 109 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep and getting out in hard/dense soil for laying/jointing kit/repair of cable and erection of poles complete all as specified and directed. |
| 110 | Returning filling in including spreading, Levelling watering and well ramming in layers n.exc 25 cm in hard/dense soil all as specified and directed. Note : Surplus soil if any shall not be removed but left proud over the trench |
| 111 | M & L for sand filling floors or in foundation incl watering and Compansation |
| 112 | M & L for old size bricks common burnt clay building bricks sub class B designation 75 |
| 113 | Supply and fixing building LED street light fitting 35W 230 Volt AC outdoor type with high pressure die cast aluminium hosing and heat fesistant complete with driver lamp bracket with impact and corrosion resistant incl thermal management in multiple optics complete with IP 65/66 Protection complete, all as specified and directed. |
| 114 | M & L in replacement for earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thicj\k buried directly in ground ( earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia as earth continuty conductor by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR-I 2010, connected to main switch board all as specified and including testing on completion , necessary excation, earthwork, PCC works and GI earth pit cover with watering pipe 20 mm dia GI pipe medium grade , funeels with wire mesh and GI pipe of 15 mm dia of light grade for protection of earth wire upto 7.5 mtrs complete all as specified and directed by Engineer-in-Charge. Note:- On testing after completion if the desired resistance is not obtained the earthing shall be re- done aat no extra cost. |
| 115 | Supply and fix ceiling fans, complete with three blade, down rod, accessories 230 V, 1200mm sweep, min delivery 210 CFM with service value five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 116 | Supply & Fix of GI Pipe bracket of 40 mm dia size of 1.2 mt long bent to shape for fixing of LED Street light fittings and fixing to pole, walls etc including fixing of clamp, nut bolt ect as specified and directed. |
| 117 | Schedule of Credit Please Enable Macros to View BoQ information |