|
| 1 | R.C.C. work with cement, approved coarse sand and 20 mm gauge dalla stone aggrigate with M-20 nominal mix 1:1.5:3 in Lintel band of doors and windows excluding the supply of all reinforcement and its bending but including its fixing and binding with 24 BWGGI binding wire, centering and shuttering, supply of all materials, labour and tools and plants etc. required for proper completion of work. |
| 2 | M-150 class brick work 1:6 cement and sand of 2:25 fineness modululous mortar in super structure including supply of all material, labour and tools and plants etc. required for proper completion of work. But in super structure including necessary cutting and moulding of brick work, for one brick 230mm thick wall. |
| 3 | M-150 brick work in 1:4 cement and coarse sand in super structure including necessary cutting and moulding of brick work, but for half brick wall add for extra lbour icluding supply of all materilas,labour and T&P etc. required for proper completion of work. |
| 4 | R.C.C.Work with cement approved coarse sand and 2cm gauge stone girt in the propotion of 1:1.5:3 R.C.C. Lighter Beam. (M-20) in excluding cost of rienforcement (steel) and its banding but including fixing and banding the same with 24 B.W.G.G.I. banding wire and including necessary centering and shuttring etc.& also including supply of all materilas,labour and T&P etc. required for proper completion of work. |
| 5 | R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion 1:1.5:3 in R.C.C. Slab, excluding supply of steel and its bending but including fixing and binding the same with 24 B. W.G.G.I binding wire and including necessary centering and shuttering etc and also including s/o all materials required for proper comletion of the work. |
| 6 | Mild steel or iron work in plain work such as reinforced cement concrete (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work, supply of steel, all labour etc. required and including wastage bend, hooks and authorised over lapping shall be measured. As per s.i.no. 504 |
| 7 | Fabrication supply and fixing of M.S.Angle iron (40x40x5mm) in chaukhats for door, windows and ventilators including using flat iron etc. and 3 mm thick gusset plates at corners and junctions including supply of steel cutting, drilling holes bending, moulding requried shap and welding, supply and fixing of necessary hings for doors 125mm of 14 gauge size, window and ventilator 100mm, 16mm gauge size, with cleats and stoppers etc. and 10 mm dia bottom tie rod etc. complete. DSR 10.31 |
| 8 | Fabrication and supply of M.S. grill as per approved design and drawing including the stair case railling etc. with square bars, m.s. angle iron, and m.s. flat iron as per direction of Engineer-incharge, supply of steel and its wastage, cutting, drilling holes and welding joints where necessary including each joint tube perfectaly welded and jointed and grinded to smooth finish. DSR 10.31 |
| 9 | Z-sction windows (151 marke) or Z- tubler window made of gold rolled formed continous seam welded M.S. tubler box section made from corrosion resistant coated conforming to IS: 513=1973 size of welded tubuler Z-profile and T profile are glzing bars jointed mitred and flush but welded and lugs 100 mm long of 19 x 3 mm size embedded in cement concrete blocks 150 x 100 x 100 of 1:3:6 cement approved coarse sand and 20 mm nominal size of dalla stone aggregate or with plugs and screws required including fixing 4 mm thick glass panes with glazing and special metal sash putty of approved make complete including M.S. oxidised casement fastercer (125 mm length weighting not less than 240 gms) and box type hinges 65 mm length 2.5 mm thick galvnised pin of 6 mm dia and aplying a priming coat of approved steel primer. DSR 10.31 |
| 10 | Fixing of door, window steel chaukhat frame in position and making all arrangement etc. complete. As per N.S.No. 3 chapter 10 |
| 11 | Door chaukhat frame |
| 12 | Window chaukhat frame |
| 13 | Ventilator chaukhat frame (Half of door) |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 32mm thick |
| 15 | Providing and fixing panes of glass with Atul or equivalent I.S.I. marked quality putty. Brads and springs complete including cost of material & labpour etc. (3.8 to 4.7 mm thick) S.I.No. 812 b |
| 16 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (250x16mm) D.S.R. 9.96.2 X0.8222 |
| 17 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (300x10mm) D.S.R. No. 9.97.1 X0.8222 |
| 18 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (125 mm) D.S.R. No. 9.100.1 X0.8222 |
| 19 | 12 mm thick plaster with cement mortar inproportion of 1:6 cement and sand of 1.25 F.M. over brick work minium thickness not be less than 10 mm including supply of all materials,labour and T&P etc.required for proper, comletion of work.As per S.I.No.586 +596 |
| 20 | 12 mm thick plaster with cement mortar inproportion of 1:6 cement and sand of 1.25 F.M. over brick work minium thickness not be less than 10 mm including supply of all materials,labour and T&P etc.required for proper, comletion of work.As per S.I.No.586 |
| 21 | Making grooves 10 to 12mm wide x 8mm deep in the plaster of wall or in ceilling vertically or horizantly as required. As per s.i.no. 598 |
| 22 | Supply and fixing of 6mm thick china white glazed tiles (ceramic tiles) in flooring/ skirting/dado with 1:3 cement and approved coarse sand mortor joints finished with white cement etc. As per s.i.no. 628 |
| 23 | 40 mm thick with 20 mm nominal size stone aggregate Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. SOR 605 |
| 24 | Providing and fixing glass strips 3mm thick in joints of panels of floor at the time of laying floor flush to the finish level of floor including supply of material, labour and tile AS per (35mm depth) S.I. No. 631b |
| 25 | 20 mm thick marble chips skirting or dado rubbed and polished to granolithic finish, under layer 15mm thick in cement plaster 1:2 (1 cement 2 coarse sand) and top layer 6mm thick with white, black or white and black or gray or mixed marble chips of sizes from to 4mm normal size laid in cement marble powder mix 3:1 (3 cement (Portland) 1 marble powder by weight) in proportion of 4:7 (4 cement marble specified or directed by Engineer in charge and polished with S.I.No. 625 |
| 26 | 12mm thick cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement:3 fine sand) with water proofing material. Sor 13.7.1+13.18 |
| 27 | Painting or vernishing new iron work in small areas or new wood work with one coat of ready mixed primming paint and two coats of approved superior quality ready mixed synthetic enamal paint of approved brand such as British paint, shalimar, Asian or equipment ISI approved paint including supply of all material, labour etc. As per painting chapter |
| 28 | Distempring with oil bound distemper of approved brand manufacture and required shade on decoreted wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture complete in all respects 2 coat SI NO-649+650 |
| 29 | Finising walls with water proof cement paint of approved make and on new work with 3 coat to give an even shade including supply of all materials labour and tools and plants etc. required for proper completon of the work. (S.I. No. 660 + 661) |
| 30 | Cinder Filling As per (M.R.) |
| 31 | Providing and laying cement based water proofing treatment 10mm (average) thickness \\"Birck Coba\\" including preparation of surface as required for treatment of roofs balconies and terraces etc. consisting of following operation: |
| 32 | Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound confirming to IS: 2645 and approved by Engineer-in-charge over R.C.C. slab including adjoining walls upto 300mm height and cleaning the surface before treatment. |
| 33 | Providing and laying cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of follwing operation : a) Appling a slurry coat of neat cement using 2.75 kg/sq.m of cement admixed with waterproofing compound conferming to IS:2645 and approved by Engineer-in-charge over RCC slab including adjoining walls up to 300 mm height including cleaning the surface before treatment. b) Laying O.B. brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admised with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand admixed with water proofing compound conforming to IS : 2645 and approved by engineer in charge to required slope and treating similary the adjoining walls up to 300 mm height including rounding of junction of walls and slabs. |
| 34 | c) After two days or proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admised with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick joint less cement mortar mix 1:4 ( 1 cement : 4 course sand) admixed with waterproofing compound conforming to IS : 2645 and approved by Engineer-in-charge. e) Finishing the surfae with 20 mm thick joint less cement mortar of mix 1:4(1cement:4coarse sand admixed with water proofing compound conforming to IS:2645 and approved by egnineer incharge including laying glass fiber cloth of approved quality in top layer of plaster finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm sqm. 3mm deep) the whole |
| 35 | terrace so finished shall be flooded with water for a minimum period of two weeks for curing and so for final test. all above operation to be done in above order and as directed and specified by the engineer incharge. with average thickness of 120mm and mininim thickness at khurra as 65 mm . Note. it is suggested that this method should be adopted after insuring the structural safety the structure.As per NEW item Sl.No. 14 Chapter 11 |
| 36 | Centring and shuttering including struting proping etc and removal of for |
| 37 | A)Lintel Band |
| 38 | B) Beam |
| 39 | C) Slab |
| 40 | Sanitary fixture and Accessories |
| 41 | P/F Water closet squatting pan (indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C fushing cistern with manully controlled device ( handle lever ) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the wall and floors for ever white vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 42 | P/F white vitreous china flat back wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern including painting of fitting and brackets, cutting and making good the walls wherever Flat back washbasin size 550X400mm with single 15mm C.P. brass Pillar tap. |
| 43 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : without Drain Board |
| 44 | 610x460 mm bowl depth 200 mm |
| 45 | Providing and fixing flexible PVC waste pipe for sink or wash basin including PVC waste fitting 32mm dia (for wash besin) |
| 46 | Providing & fixing 600 x 450 mm bevelled edge mirror fo superior glass (of approved quality0 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 47 | Proving & fixing 60x2 cm brass tower rail complete with C.P. brass brackerts fixed to wooden cleats with C.P. brass screw. |
| 48 | Soil Waste Fixing Soil Waste Pipes And Fittings |
| 49 | Providing & fixing soil, waste and vent pipes. |
| 50 | 100 mm dia sand cast S & S Pipe |
| 51 | 75 mm dia sand cast iron S & S pipe |
| 52 | Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. |
| 53 | 100 mm |
| 54 | 75 mm |
| 55 | Providing & fixing sand cast iron trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm coplete , including cost of cutting & making good the walls & floors. |
| 56 | 100 mm inlent & 75 mm outlet |
| 57 | Providing & fixing sand cast iron coller. |
| 58 | 100 mm |
| 59 | 75 mm |
| 60 | Providing & fixing plain sand cast iron S & s bend of required degree. |
| 61 | 100 mm dia |
| 62 | Providing & fixing heel rest sand cast iron S & S sanitary Bend. |
| 63 | 100 mm dia |
| 64 | Water Supply Pipes And Fittings |
| 65 | Providing & fixing G.I. pipes complete with G.I. fitting and clamp including cutting and making good the walls etc. |
| 66 | 15 mm dia nominal bore |
| 67 | 20 mm dia nominal bore |
| 68 | 25 mm dia nominal bore |
| 69 | Providing & fixing brass gate valve with CI wheel of approved quality ( screwed end) |
| 70 | 25 mm nominal bore |
| 71 | Providing & fixing 45 cm long unplasticised PVC connection pipe with brass unions. |
| 72 | 15 mm nominal bore. |
| 73 | Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 |
| 74 | 15 mm nominal bore |
| 75 | Providing & Fixing CP brass long body bib cock of approved quality conforming to IS standards and weighting not less than 690gms |
| 76 | 15 mm nominal bore |
| 77 | Providing & fixing CP brass stop cock (conealed) of standard design and of approved make conforming to IS : 8931. |
| 78 | 15 mm nominal bore |
| 79 | Providing & fixing CP brass angle valve for basis mixer and gyser points of approved quality conforming to IS 8931. |
| 80 | 15 mm nominal bore |
| 81 | Providing & fixing CP brass shower rose with 15 or 20 mm inlet. |
| 82 | 100 mm diameter. |
| 83 | Providing & fixing stainless steel jali (grating) with or without hole for waste pipe for floor/ nahani trap. |
| 84 | 100 mm dia weight not less than 100 gms. |
| 85 | Providing & Placing on terrace(at all floor lvls) polythlene water storage tank of approved brand and manufacture with cover suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fitting and base support for tank. |
| 86 | 1000*6 liters capacity. |
| 87 | External Sewerage System |
| 88 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides ramming of bottoms depth upto 1.50 m including getting out the excavated soil & them returning the soil as required. In layer’s in layers not excedding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & discposing of surplus excavated soil as directed within a lead of 50 m. |
| 89 | Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. |
| 90 | Providing ,laying and jointing glazed stone ware pipes grade ‘A’ with stiff mixture of cement mortar in the propertion of 1:1 ( 1 cement : 1 fine sand )including testing of joints etc. complete. |
| 91 | 100 mm diameter |
| 92 | 150 mm diameter |
| 93 | Providing & laying cement 1:5:10 ( 1 cement : 5 coarse san : 10 graded stone aggregate 40 mm nominal size) alroudn S.W. Pipes including bed concrete as per standard design |
| 94 | 100 mm diameter S.W. Pipe |
| 95 | 150 mm diameter S.W. Pipe |
| 96 | Constructing brick masonary manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 ( 1 cement : 4 coarse) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 40 mm nominal size ) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard desing. |
| 97 | Inside size 90 x 80 cm & 45 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimension total wt. of cover frame to be not less than 38 kg ( wt. of cover 23 kg & wt. of frame 15 kg) |
| 98 | Extra for depth for manhole with F.P.S. bricks |
| 99 | size 90 x 80 cm |
| 100 | Provinding and fixing square mouth S.W Gully trap grade 'A' complete with C.I grating brick masonary chamber with bricks and water tight CI cover with frame of 300 X 300mm size (inside) the weight of cover to be less than 4.50 Kg and frame to be not less than 2.70Kg as per standard design. |
| 101 | External Water Supply System |
| 102 | Providing & fixing G.I. pipes complete with G.I. fitting including trenching and refilling etc. ( external work) |
| 103 | 32 mm dia nominal bore |
| 104 | Providing & fixing brass full way valve with CI wheel of approved quality |
| 105 | 32 mm nominal bore |
| 106 | Constructing masonry chamber 300 x 300 x class designation 500 mm inside with 75 class designation F.P.S. brick work in cement mortar 1:5 ( 1 cement : 5 Fine sand) for stop Cock with C.I. surface box 100 x 100 x 75 mm ( inside) with hinged cover fixing R.C.C. top slab with 1:2:4 mix ( 1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 2 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design. |
| 107 | Internal Wiring |
| 108 | Wiring Points |
| 109 | Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, Complete with & SWG GI |
| 110 | earth continuity wire and piano type switch etc. complete in all respects. |
| 111 | Same as item No.(1) but for fan and light duty exhaust fan. |
| 112 | Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc. |
| 113 | As in item 221 (B) but in 20 mm dia (2mmthick) PVC conduit with one no. 2.5 sq. mm for PVC insulated multisrand copper conductor cable as earth wire drawn inside the conduit Make- Anchor/havels |
| 114 | Supply and laying of 20 mm dia heavy guage 16 SWG (2 mm thick) PVC Conduit of complete |
| 115 | Supply and fixing of flush/surface mounting distribution boards complete in all respects.(b) 6 Way TPN |
| 116 | 6 Ways CAT A |
| 117 | Supply and fixing of 6/10/16/20/25/32 amp. SP MCB (10 KA) Make- MDS/ABB |
| 118 | Fluorescent Tube Light Fitting |
| 119 | Supply & Fixing single light wall bracket on matching MDFEG board base etc complete in all respects. |
| 120 | Supply & Fixing LED light 9 watt |
| 121 | Supply and wiring of submain 2X4 SQMM in PVC insulated 1100 V grade single core Copper conductor cable in heavy gauge rigid PVC conduit partly laid in slab along with reinforcement before concreting with 8 SWG GI earth continuity wire etc. complete in all respects. |
| 122 | Supply and wiring of 2 number 6 Sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in heavy duty (2mm thick) PVC conduit as earth continuity wire drawn in conduit. |
| 123 | Luminairs |
| 124 | Erection and testing of ceiling fan and regulator etc. excluding supply and down rod, complete in all respect. |
| 125 | Erection and testing of exhaust fan on the existing hole with suitable size of bolts, nuts and washers etc. complete in all respect. |
| 126 | Miscellaneous |
| 127 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. |
| 128 | Supply and fixing of electronic fan dimmer, 300/400 watt, ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer-in-charge of work. |
| 129 | Non Scheduled Items (As per Market Rate) |
| 130 | Supply of AC 230/250 volts, 50 HZ ceiling fan with standard down road, blades, 2 Nos. caps etc. Complete |
| 131 | (Make : Bajaj/Crompton Greavs)1400 mm Sweep |
| 132 | Supply of AC 230/250 volts, 50 HZ fresh air fan including providing nuts, bolts, mounting frame and other accessories etc. Complete |
| 133 | (Make : Bajaj/Crompton Greavs) 300 mm Sweep |
| 134 | Supply & laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 volts grade at a depth of 750mm below ground level over a sushin of 75mm thick sand all around and protected with burnt bircks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the Engineer-in-charge, complete in all respect. The armouring of the cable shall be propoerly connected with the earth conductor by clamps etc. |
| 135 | (i) 50 sqmm 3-1/2 core |
| 136 | Supply & burying of 600mm X 600 mm X 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one No- 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of GI pipe and copper wire will be extra) 30 cm square CI frame with hinged cover masonry housing alternate layers of charcol/coke and salt at least 150 mm thick alround etc complete in all respect. |
| 137 | Supply and laying of 25mm X 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects. |
| 138 | Supply & fixing of one number 6 SWG GI wire in 15mm dia G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement sand, labour, T&P other material required for proper completion of the work as directed at site. |
| 139 | Supply and erection of factory Fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse swictches with fuses and instrument chamber etc. complete in all respects. The instrument chember shall be separate and shall comprise of flush type ammeter,voltmeter,selector switches for ammeter and voltmeter,instrument fuses,current transoermer etc. The board shall have suitable capicity electroytic aluminum busbar as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic support such as CMC/DMC support with deteachable side cover and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entry boxex in case of padestal type,cable sockets,compression glands and indicating lamp on incomming etc. |
| 140 | Providing filling brick bats mm brick ballast S.I.No.2 (a) |
| 141 | Providing filling 45-63 mm brick ballast S.I.No.2 (b) |
| 142 | Providing filling 40 mm brick bats S.I.No.1 (c) |
| 143 | Excavation in foundation in ordinary soil (loam, clay or sand) including lift upto 1.50m and lead upto 30m. and including filling, watering and ramming of excavated earth in to the space between the building and side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by engineer in charge.S.I. No. 251 |
| 144 | Concrete with 40mm gauge approved Stone ballast, fine sand and cement in proportion of 8:4:1 in foundation and floor including supply of all materials labour and tools and plants etc. required for proper completion of work. S.I. No. 281 |
| 145 | M-150 class brick work in 1:4 and fine sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools plants etc. required for proper completion of wrok. S.I. No. 305 |
| 146 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. D.S.R. 11.3.1 |
| 147 | Cast cement concrete as in baffle wall slab precast with cement approved coarse sand and 20mm gauge approved coarse sand and in proportion of 1:1.5:3 As per S.I. No. 283A |
| 148 | Providing and fixing 100 x 100 x100 mm single equal plain junction of required degree :Sand cost iron of 100 mm diameter. As per IS: 3989. D.S.R 17.44.1 X 0.8345 |
| 149 | Providing and fixing 100 mm dia Sand cast iron Pipe for in let and out let trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : As per IS: 3989.D.S.R 17.60.1.1 X 0.8345 |
| 150 | Providing and fixing plain Sand cast iron 100 mm diameter bend of required degree. as per IS : 3989. D.S.R. 17.39.1.2 X 0.8345 |
| 151 | Providing and fixing waste and vent pipe 100 mm diameter of 1.80m. Lenth sand cost iron S&S pipe .17.35.1.1X 0.8345 |
| 152 | Providing and fixing sand cast iron terminal guard (Cowl) 75mm diameter As per IS.No. 17.56.1.1X 0.8345 |
| 153 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : D.S.R. 17.58.1 & D.S.R. 17.58.3 |
| 154 | 100 mm |
| 155 | Providing and fixing cast iron Manhole cover of 600x600mm with frame weighting not lessthan 32 kg. S.I.No. 53 (Sanatry materials) |
| 156 | Fixing sand cast spigot and socket, soil waste and ventilating pipes of nominal size 50mm diameter (leasd) caulked joint to be measured and paid separatly N.B.O. No.23.79 (a) |
| 157 | 50mm dia pipe |
| 158 | Providing and fixing M.S. Stays and clamps for S.C.I. ventilating pipe as per stardand design clams made of 30x3mm flat iron with two bolts and nuts 12mm dia M.S. Slaty 900mm long in beded in cement Concrete block 230x230x 150mm in 1:2:4 Cement approved coarse sand and cement N.S. |
| 159 | Supply, Installation and boring 6\\" dia 50 mtr. Deep with 110mm dia pvc pipe(45mtr pvc pipe and 15 mtr slotted pvc pipe with 2 HP submersible pump including all T&P. etc. |
| 160 | GST Extra As per Applicable Please Enable Macros to View BoQ information |
