|
| 1 | M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices, complete all as specified and as directed. |
| 2 | M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on ceilings including cornices complete all as specified and as directed. |
| 3 | M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of colour wash on walls including cornices complete all as specified and as directed. |
| 4 | M&L washing rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper, complete all as specified and as directed. |
| 5 | M&L Complete removal of existing treatment of wall suface and applying two coats of oil bound distemper, over 01 mm thick wall care putty, complete all as specified and as directed. |
| 6 | M&L washing rubbing down and stopping of distempered and painted surfaces and applying one coat of cement based paint on wall surfaces including proper curing, complete all as specified and as directed. |
| 7 | Complete Removal of existing treatment of walls applying two coats of cement based paint over one coat of chalk whitining on plastered surfaces, complete all as specified and as directed. |
| 8 | M&L for preparation of wall surface with 3 mm thick wall care putty interior/exterior on wall surfaces finished smooth and even, Complete all as specified and directed by Engineer in Charge |
| 9 | Applying one coat of Acerlic Exterior Emulsion on walls including preparation of old decorated plaster surfaces on wall as specified and directed by Engr-in-charge. |
| 10 | M&L for preparation of old wood or wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 11 | M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 12 | Demolition of brick work built in cement mortar of any specification any size and in any position, complete all as specified and directed. |
| 13 | M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius, complete all as specified and directed. |
| 14 | All as per item no 13 above but reuse bricks in any specification and in any position retrieved from demolition including cleaning and removal of mortar from old bricks, complete all as specified and directed. |
| 15 | M & L for brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4, complete all as specified and directed. |
| 16 | M&L for Rendering/plastering, 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth (without using extra cement) including Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer, complete all as specified and directed. |
| 17 | M&L for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer, complete all as specified and directed. |
| 18 | M&L for Rendering/plastering, 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth (without using extra cement) including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer, complete all as specified and directed. |
| 19 | M&L for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer, complete all as specified and directed. |
| 20 | M&L Rendering 5mm thick in cement mortar (1:3) on any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement, in ceiling, soffits of chajja or similar location etc including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces and applying two coats of white wash on ceiling surface complete all as specified & directred. |
| 21 | M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed. |
| 22 | M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in CM 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and as directed. |
| 23 | S/F of Glazed coloured and cereamic tiles in vertical surfaces 300X200X7mm/ 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, all as specified and directed |
| 24 | S&F Vitrified ceramic tiles 9-10mm thick (Square/rectangular)polished area of each tiles n.exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specified and directed |
| 25 | M&L for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 15mm thick screed in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specified and directed |
| 26 | Complete removal of existing treatment on terra- cotta floor surfaces like a pathway pavers , Chequered, inlerlocking tile, roof tiles surfaces etc including necessary preparation of surfaces and applying two coats of expoxy exterior emulsion paint over a coat of primer complete all as spd and directed by Engineer in Charge |
| 27 | Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc, complete all as specified and directed. |
| 28 | M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade with grey cement and no pigment used, excluding laying of sand cushioning complete all as specified and as directed. Note :- Sand will be measured and paid seperately |
| 29 | M&L sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 30 | M&L Chequered cement concrete coloured tiles 30 cm x 30 cm x 25 mm thick using grey cement and no pigment set over & including 20 mm thick screed bed or bedding layer in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified and directed. |
| 31 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite, complete all as specified and directed. |
| 32 | Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats, bed blocks, coping etc including necessary form work, complete all as specified and directed. |
| 33 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified and directed. |
| 34 | All as per item No 33 herein before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each, complete all as specified and directed. |
| 35 | Taking down shutters of any description and refixing in the same opening exc 1 sqm and not exc 2 sqm each including easing/ adjusting with necessary screws etc complete all as specified and directed. |
| 36 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed. |
| 37 | S&F for Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed. |
| 38 | All as per item no 37 above here-in-before but size 125x60mm with double rebate complete all as specified and directed. . |
| 39 | Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 of MES Schedule Part-II (2020). |
| 40 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2020) complete all as specified and directed. |
| 41 | PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed. |
| 42 | PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed. |
| 43 | PTMT handle 125mm long fixed with steel screws complete all as specified and directed. |
| 44 | S& F second class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good disturbed surfaces of wall complete all as specified and directed |
| 45 | S&F 30mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers and fitted to chowkats complete all as specified and directed. |
| 46 | S&F 30mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed. |
| 47 | S & F Factory made double rebate box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle, with & Without glazing bars, one side wiremesh shutter without glazing bar & other side glass shutter with glazing bar including 6mm mild steel guard bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.Note : Wiremesh and glass will be measured seperately |
| 48 | S&F Factory made box type steel ventilator with glazing bars dovetailed or welded,grills/guard bars shouldered with steel ventilator frames and with one shop coat of zinc chromate primer complete all as specified and directed. |
| 49 | M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed |
| 50 | M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 51 | S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work, including dismantling of boarding, any description,, fixed in any position complete all as specified and directed |
| 52 | M&L for plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads as fixed in cupboards and shelves, section area n. Exc 3 Sq.cm in hard wood complete all as specified and directed |
| 53 | S & F in repair 14-16 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shutters & shelves including dismantling of boarding, any description complete all as spd and directed by Engineer in charge. Make : Rajshree, Echon or equallent as approved by GE |
| 54 | S&F for continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws, complete all as specified and directed. |
| 55 | S&F for hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws, complete all as specified and directed. |
| 56 | S &F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 57 | S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm, complete all as specified and directed. |
| 58 | S & F Galvanised mild steel wire cloth 0.48 mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed. |
| 59 | S &F in repair to 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm incl. including hacking out old broken glass and putty/beading, complete all as specified and directed. |
| 60 | S &F in repair Galvanised mild steel wire cloth 0.48 mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed. |
| 61 | S&F in repair 20mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc all as specified and directed by Engineer-In-Charge. |
| 62 | S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge. |
| 63 | S&F 100mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge. |
| 64 | S&F Aluminium alloy, anodised, sliding door bolt 250mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 65 | S&F 140 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed. |
| 66 | S&F in repair Aluminium body hydraulically regulated Door closer universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and directed. |
| 67 | S&F in repair 300mm mild steel ordinary rat rail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 68 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers in repairs and all as specified and directed by Engineer-in- charge |
| 69 | S&F PVC body toilet cabinet (box type) 600 x 450mm x 125mm size with mirror of selected quality glass having 5.5mm thickness and fixed to walls with screws and wooden/rawl plugs as in repair, complete all as specified and directed. |
| 70 | S&F CP tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed in repairs and all as specified and directed. |
| 71 | S&F CP Soapdish Oval /square type as fixed in repairs and all as specified and directed. |
| 72 | S&F CP Toilet Paper Holder with Flap as fixed in repairs and all as specified and directed. |
| 73 | S &F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 74 | S&F in repair 1mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & cantilever brackets embedded in cement and sand mortar in wall , overall size of sink 495mmx420mm, bowl size 410mmx330mmx 160mm, complete all as specified and directed. (Make: Prayag/ Shakti/ Nirali) |
| 75 | S&F in repair 1.00mm thick stainless steel plate racks of size 900X750X250 mm all as specified and directed. |
| 76 | Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 77 | S & F for hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge . |
| 78 | S & F for gypsum Board 8 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement including dismantling of ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer in Charge. Note:-The hanging stay wire shall not be less than 3.00mm thick all are included in the above mentioned item only. |
| 79 | S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge. |
| 80 | S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge. |
| 81 | Taking up or down 15 mm existing steel tubing and connections and re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed. |
| 82 | All as per item No.81 here in before but 20mm dia, complete all as specified and directed. |
| 83 | S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed, complete all as specified and directed. Make: Cera/Parryware/Hindustan/Prayag |
| 84 | S&F in repair 15mm bore CP brass stop valves of cast copper alloy (concealed type), screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup, complete all as specified and directed. (Make: Jaquar/ Cera/Prayag ) |
| 85 | S&F in repair 15mm bore CP brass stop valves/ angle valve CP of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup, complete all as specified and directed. (Make: Jaquar/ Cera/Prayag ) |
| 86 | S&F in repair 125mm dia CP brass shower rose with or without swivel joints, any size including fixing to steel pipe or union, complete all as specified and directed.(Make: Jaquar/ Cera/Shakti ) |
| 87 | S&F in repair long body CP Brass bib tap, 15mm bore, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. (Make: Jaquar/ Cera/Prayag ) |
| 88 | S&F in repair 15mm bore long body CP Brass pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed. (Make: Jaquar/ Cera/Prayag ) |
| 89 | Supply & fixed replacement of pressure JET for EWC including PVC connection and CP fitting as fixed in repairs and all as specified and directed. (Make: Jaquar/ Cera/Prayag ) |
| 90 | S&F in repair Rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 15mm PVC float valve high pressure with polythene float valve & taking down old PVC water tank complete all as specified and as directed. (Make : Sintex, Sheetal, Polycon ) |
| 91 | S&F in repair Rotational moulded Polyethylene water storage tank of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm PVC float valve high pressure with polythene float valve & taking down old PVC water tank complete all as specified and as directed. (Make : Sintex, Sheetal, Polycon ) |
| 92 | S&F in repair Vitreous china white wash down water closet including PVC sheet cover, Jet and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, complete all as specified and directed. (Make: Cera/Parryware/Hindustan ) |
| 93 | S&F in repair Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified and directed. |
| 94 | S&F in repair Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing, complete all as specified and directed. (Make: Cera/Parryware/Hindustan ) |
| 95 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls including taking down eaves gutters and rain water pipes (any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and directed. |
| 96 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches including taking down eaves gutters and rain water pipes (any size or pattern),including all fittings heads shoes bends swan-necks etc complete all as specified and directed. |
| 97 | S&F in repair 75mm dia PVC (SWR)with access door bends any radius complete all as specified and directed. |
| 98 | S&F in repair 110 mm dia PVC (SWR)with access door bends any radius complete all as specified and directed. |
| 99 | S&F in repair 15mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 100 | S/F in repair gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed. |
| 101 | S&F for 15mm dia brass spindle half turn for 15 mm CP brass fancy Bib/Pillar tap/ angle cock/Stop Cock etc as fixed in repairs and all as specified and directed |
| 102 | S&F in repair PVC connection both end brass union and length 450 mm long for 15 mm bore pipe complete all as specified and directed. |
| 103 | S&F in repair PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs complete all specified and directed. |
| 104 | M&L waste coupling brass CP for glazed sinks, basins etc with long shanks and fly nuts, flange embeded in cement and oehr and fixed 32mm bore, complete all as specified and directed. |
| 105 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern) white/ coloured cascade type 655 X 355 X 735mm (monolithic flush cistern type) single picece wc with soft slim close seat cover ,Hinges fixing accessories set including flush cistern with S-Trap of size 220mm all as per manufacturing instructions and all as specified and directed. (Make:Cera/Jaquar/Parryware ) |
| 106 | S& F in repair Syphon Kit including EPDM rubber washer for Monolithic or Cascade type of flush cistern for vitreous china 10 ltr capacity complete all as specified and directed. |
| 107 | S&F in repair table top Wash hand basin vitreous china (white) wall mounted with box type wash basin vanity including CP waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, & making good disturbed surfaces to match with the existing, complete all as specified and directed. Make:Jaquar/Parryware/Prayag/Cera ) |
| 108 | S & F in repair to CP WHB mixer (Cera cat No: F2002461 Basin Mixer ) 15mm bore. With out popup waste system with 450mm long braided hoses Complete all as specified and directed by Engineer in Charge. (Make: Cera/ Jaquar/Parryware ) |
| 109 | S&F chromium plated fancy type15mm bore dia hot and cold wall mixer with telephonic shower (Cera Cat No: F2002404) with provision forover head with 115mm long bend pipe one upper side connecting legs and wall flanges all as specified and directed. (Make: Cera/ Jaquar/Parryware ) |
| 110 | Cleaning & Removing all scale and dirt etc from 500 ltr capacity tanks and from mouths of circulating pipes etc incl mension date of cleaning with paint, complete all as specified and directed. |
| 111 | Cleaning & Removing all scale and dirt etc from exc 500 and n. Exc 1000 ltr capacity tanks and from mouths of circulating pipes etc incl mension date of cleaning with paint, complete all as specified and directed. |
| 112 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. Please Enable Macros to View BoQ information |
