|
| 1 | S&F anodised Aluminium snap grid frame work of size 605 x 605mm for seamless ceiling, and hangers 6 mm dia G.I. ( Upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. Flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete and including supply and fixing 6mm thick non asbestos fibre cement building boards as per manufacturers instructions and jointing and finishing to a flush finish of tapered and square edges other board any other joints with recommended jointing compound over jointing tapes including dismantling of existing ceiling, complete all as specified and directed. |
| 2 | S&F in repairs 6mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber /GI / aluminium framework with screws to ceiling flat or sloping, complete all as specified and directed. |
| 3 | S&F in repair 6mm thick non asbestos fibre cement building boards one side aluminium foil coated fixed or laid / inserted to aluminium frame work with screws, complete all as specified and directed. |
| 4 | Preparation of new or previously untreated plaster/ AC sheet / Gypsum board surfaces of ceiling including cornices and applying two coats of oil bound distemper colour / tint, complete all as specified and directed. |
| 5 | S&F in repairs 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work, complete all as specified and directed. |
| 6 | S&F in repairs 12mm thick wooden wall panelling of second class softwood with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or sectional area exc 13 Sqcm and n exc 25 Sqcm at n exc 90 cm centre to centre in both direction and including two or more coats of French polishing on all the exposed surfaces wooden panelling including taking down existing electrical fittings and re-fixing the same, complete all as specified and directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 8 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not etc. 50m and making good surface, work in soft/loose soil, complete all as specified and directed. |
| 9 | M&L for structural steel work as in truss, rafter purling, made out of angle / Hollow pipe / tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc. conforming to Fe 410-W (gde-E-250) Quality, confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed. |
| 10 | M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings conforming to Fe-290 (GdeE165) (exclusive or steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing, complete all as specified and directed. |
| 11 | M&L for plain cement concrete 1:2:4, type B-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed. |
| 12 | Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed. |
| 13 | Preparation of old painted steel & iron surfaces of any description over 10cm width or girth and applying One coat synthetic enamel paint, complete all as specified and directed. |
| 14 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 15 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 16 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 17 | S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating, complete all as specified and directed. |
| 18 | All as per Ser item No 17.00 here in before but except Sheets. |
| 19 | S&F 0.63mm thick, galvanised, plain mild steel sheeting (ISI Marked) grade 'O' with minimum 120 grams/Sqm for zinc coating in ridges, hips, valley gutters, drip and straight flashings, fixed with coatch screws and washers complete all as specified and as directed |
| 20 | M&L strong silicone sealant suitable for roof leak hole, metal leak, gap filling etc hole size n exc 5x5mm including necessary fitting and scrafolfing height upto 15 m complete all as specified and directed. |
| 21 | Preparing new zinc (or galvanised) surfaces to receive painting of any description over 10cm width or girth, by coating with mordant solution including washing and cleaning, etc. steel and iron surfaces and applying two coats of synthetic enamel paint in camouflaging CCD pattern as approved, complete all as specified and directed. |
| 22 | M&L for Preparation of old zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 23 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 24 | M&L for 75mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base complete all as spciified and directed |
| 25 | M&L for 100mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 26 | M&L for 10mm thick Glazed dado/Floor vitrified parking tiles heavy duty, exterior grade, textured finished of size 300X300mm over and including 15mm thick Screed bed or bedding layer in CM 1:4, complete all as specified and directed. |
| 27 | M&L for chequered cement concrete tiles size 300 mm x 300 mm x 22-25mm thick with grey cement and pigment , rubber moulded with laquer polish for extra shine, ISI marked, coloured, set jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 28 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and direction. |
| 29 | M&L for brick tiles of size 230x75x20mm thick and incl 10mm thick screed bede in cm(1:3) set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of wall including taking down old bricks tiles complete all as specified and directed by GE. |
| 30 | M&L for plain cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in edges of interlocking tiles / chequered tiles, roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed. |
| 31 | S&F aluminium powder coated aluminium window having three track (minimum thickness of powder coating 50 micron) with aluminium section 92mm X 31.75mm (Weight bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40mm X 18mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rm mounted on bearing to slide on tracks plain anodized in approved shade including supply and fixing of 5mm thick plain glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc. including taking down old, complete all as specified and directed. |
| 32 | S&F powder coated aluminium grill (Thickness or powder coating not less than 50 micron) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, complete all as specified and directed. |
| 33 | S&F aluminium powder coated ventilator (minimum thickness of powder coating 50 micron) having fixed glass with aluminium section having section 50.80mm x 25.40mm (weight 0.489 kg/m) glazing clear section (weight 0.109 kg/m) with plain anodized including supply and fixing of 5mm thick sun / heat reflected glass making frame and glass water tightening making it good etc. including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc. including taking down old, complete all as specified and directed |
| 34 | S&F Box type steel window double frame (glazed & gauged) made of ERW tube P- section of size 60mm x 25mm double rebated outer frame comprise glazed Skelton shutter door frame of ERW tube P-section size 50mm x 20mm with two No's openable leaf consisting of two No's of sash bar of T-sec 20mm x 3mm welded to frame with one No vertical mullion of ERW of ERW box type T-section size of 60mm x25mm FI 2mm thick welded / screwed to frame for fixing of wire gauge/glass and 10mm Sqr Bar security grill with 100mm spacing including fixture and fitting like as handle, tower bolt stopper , cleat, pintail hinges, holdfast primer etc. including taking down old window and repair damaged portion complete all as specified and directed.(Note- 3mm thick sheet glass, wire mess will be include and window will be measured one side only) |
| 35 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 36 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying and fixing in opening, complete all as specified and directed. |
| 37 | S&F 30mm thick Factory made Solid Panel PVC Door Shutter (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 38 | S&F 100mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.. |
| 39 | S&F 150mm size Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 40 | S&F 150mm size Aluminium handles, cast type, anodised, complete all as specified and directed. |
| 41 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 42 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 43 | M&L for Glazed ceramic tile 300x600x06-7mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 44 | M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as completed all as specified and directed. |
| 45 | M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed. |
| 46 | M&L for Light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat CM 1:4, complete all as specified and directed. |
| 47 | S&F in repairs 12mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required, complete all as specified and directed. |
| 48 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel over, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed. |
| 49 | S&F in repairs stainless steel handle 450mm size & 25mm dia suitable for toughened glass door, complete all as specified and directed. |
| 50 | S&F in repairs 2 levers stainless steel floor lock suitable for toughened glass door, complete all as specified and directed |
| 51 | S&F in repairs 5mm thick coloured ACP Sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC wall lining, and solid partitions inclusive of Solvent cement and fixing at site in high quality colour of sheet, complete all as specified and directed. |
| 52 | S&F in repairs 20mm dia stainless steel drapery curtain rods including brackets, end finials (Latoo), for curtain rails fancy decorative type and fix with brass screws to walls approved quality etc., complete all as specified and directed. |
| 53 | Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc of capacity upto 500 litres and refixing the float valve with plugging including writing letter i.e. \\"TANK CLEANED ON ....(Date)\\" not exc. 100mm height with synthetic enamel paint and wash tank in every 3 months, complete all as specified and directed. |
| 54 | Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc of capacity 500 litres to 1000 litres and refixing the float valve with plugging including writing letter i.e. \\"TANK CLEANED ON ....(Date)\\" not exc. 100mm height with synthetic enamel paint and wash tank in every 3 months, complete all as specified and directed. |
| 55 | S&F in repairs Vitreous china squatting pan, Orissa pattern, size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, complete all as specified and directed. |
| 56 | S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed. |
| 57 | S&F in repairs 15 mm size WHB / sink/ wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed. |
| 58 | S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed. |
| 59 | S&F in repairs 20mm to 25mm thick second class softwood weather boarding, clean sawn, rebated on thick edge to give 20mm laps and fixed in eaves board etc. upto 15m height, complete all as specified and directed. |
| 60 | S&F in repairs aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified and directed. |
| 61 | S&F in repairs 15mm bore Stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with capstan head, complete all as specified and directed. |
| 62 | S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 63 | S&F in repairs one piece EWC (cascade type) water closet with in built cistern white in colour including slim soft close seat cover, health faucet fixing, P or S trap complete as per manufacture direction, complete all as specified and directed. |
| 64 | Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismantling / taking down items) worth Rs 2,01,785.00 during AOC.(Note :- Tenderers shall not quote for this Schedule) Please Enable Macros to View BoQ information |
