|
| 1 | Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified and directed by Engineer-in-Charge. |
| 2 | Demolition of mud phuska on roof any thickness complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material & labour for Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & labour for Cutting grooves in brick wall, 50mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material & labour for PCC 1:3:6, type C-0 using 12.5mm graded stone agg as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100 complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material & labour for Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over and including bitumen primer @ 0.30 kg / sqm by forced application complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material & labour for cement concrete tiles, factory made, 22 mm thick, of size 250 mm x 250 mm, machine pressed and cut polished and set jointed and pointed in neat cement slurry and fabricated using grey cement & no pigments. over and including 15 mm thick cement mortar (1:4) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified and directed by Engineer-in-Charge.Note: WPC will be measered and paid separately |
| 8 | Material & labour for PCC 1:2:4, type B-0 using 12.5mm graded stone agg as in roof kerb, benching, mud stops, steps, coping and the like items slightly rounded or chamfered on the edges complete all as specified and directed by Engineer-in-Charge. |
| 9 | Supply & fixing for PVC(HDPE) rain water pipes, 150 mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts washing, nuts etc including taking down existing damaged CI rain water pipe complete all as specified and as directed |
| 10 | Supply & fixing PVC (SWR) bends/tees of any radius for 150mm bore as in repair complete all as specified. |
| 11 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for cement plastering 15mm thick in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately. |
| 13 | Supply only integral water proofing compound complete all as specified & as directed by Engineer-in-Charge. |
| 14 | M&L for cement plastering 10 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 15 | M&L for cement plastering 5mm thick in cement mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. |
| 17 | Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. |
| 18 | Material & labour for Preparation of plastered surfaces of walls and applying two coats of cement base paint over a coat of primer and preperation of plastered surface, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Applying 02 coats of exterior emulsion weather proof paint (light shade) to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer as recommended for under coat by manufacturer of exterior emulsion and primer complete all as specified and directed. |
| 20 | M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed |
| 21 | Applying 02 coats of interior oil bound distemper (light shade) to wall surfaces over & including a coat of interior wall primer as recommended for under coat by manufacturer of OBD and primer complete all as specified and directed. |
| 22 | Material & labour for preparation of plastered/old plastered surfaces of ceiling and applying three coats of white wash , complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified |
| 24 | Material & labour for Preparation of new wood surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified |
| 25 | Material & labour for Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 25mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed. |
| 26 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified. |
| 27 | Material & labour for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius bulit in C:M 1:6 all as specified. |
| 28 | Demolition of reinforced cement concrete of any description for roof,colums ,beam of any type etc complete all as specified and directed. |
| 29 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 30 | Supply & fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, concrete complete all as specified . |
| 31 | M & L for Framed brackets of angles or tees for cooler stand with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets complete all as specified & directed complete. Please Enable Macros to View BoQ information |
