|
| 1 | M&L for Preparation of old decorated surfaces of wall and applying one coat of white lime wash (white washing) on walls including corneces, pillars, complete all as specified and directed. |
| 2 | M&L for Preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed. |
| 3 | M&L for Preparation of old decorated surface of wall and applying one coat of cement based paint including corneces, pillars etc complete all as specified and directed. |
| 4 | Applying one coat of Acerlic Exterior Emulsion on walls including preparation of old decorated plaster surfaces on wall as specified and directed by Engr-in-charge. |
| 5 | Complete Removal of existing treatment of walls applying two coats of cement based paint over one coat of chalk whitining on plastered surfaces all as specified and directed. |
| 6 | M&L for Preparation of old decorated surfaces on ceiling and applying one coat of white lime wash including cornice and pillars etc, complete all as specified and directed. |
| 7 | M&L for Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 8 | M&L for Preparation of old decorated surface of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 9 | M&L Cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete, as in filling under sunken floor portion including Demolation of unreinforcement cement concrete in any description and in any position, complete all as specified and directed. |
| 10 | M&L for Rendering/plastering, 10 mm thick in cement mortar (1:3) on concrete surfaces of sunken floor with WPC compound and applying bitumen blown any grade applied two coats to concrete surface / rendering at the rate of 1.5 kg per sqm per coat and treating the sunken floor complete all as specified and directed |
| 11 | M&L APP modified polymeric membrane with mineral finish on top min 3 mm thick & weighing n. less than 3.5kgs/sqm with mineral reinforced with polyster non-woven fabric(wt n.less than 150gm/m2) laid over cold bituminous primer by torch application method with min overlap of 75mm on longitudinal direction & 100m in the transverse direction complete all as specified and directed |
| 12 | Supply only integral water proofing compound (ISI Marked), complete all as specified and directed. |
| 13 | M&L for 25mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate as in sub base in flooring complete all as specified and directed. |
| 14 | M&L Glazed ceramic coloured tiles in vertical surfaces 300x450x7mm/ 200x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces including dismentling of wall tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified & directed |
| 15 | M&L Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 15 mm thick screed bed in cement mortar (1:6) including dismentling of floor tiling withcement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 16 | M&L Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.11 Sqm but nexc 0.18 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 15 mm thick screed bed in cement mortar (1:6) including dismentling of floor tiling withcement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 17 | M&L for Glazed ceramic tiles, coloured (light colour as approved),7 to 8 mm thick (square) area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm, on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles including dismentling of floor tiling incl cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises, complete all as specified and directed. |
| 18 | S&F Vitrified ceramic tiles 9-10mm thick (Square/rectangular)polished area of each tiles n.exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade) cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specified and directed |
| 19 | M&L for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 15mm thick screed in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specified and directed |
| 20 | Demolition of un-reinforced cement concrete in any position complete all as specified and directed |
| 21 | M&L for 75 mm thick PCC (1:2:4) type B-1 using 20 mm graded crushed stone agg.as in floor sub bases, hard standing and roof sub bases finished complete all as specified and directed |
| 22 | Dismantling of brick tiles or terracing tiles single layer laid on roof jointed & pointed in cement mortar complete all as specified and directed |
| 23 | Demolition mud phuska in roofs, any thickness, including plastering and leeping etc complete all as specified and directed |
| 24 | Roughening surfaces of old concrete floor/ roof for removing old bitumen coat/ any other type of treatment etc., by picking, sweeping clean and washing down with water to remove dirt/ dust etc, including rendering 10 mm thick cement plaster on roof surfaces in cement mortar (1:4) and applying evenly a tack coat of industrial bitumen 85/25 @ 1.5 kg per sqm over a coat of bitumen primer @ 0.30 ltr per sqm including preparation of roof surfaces, complete all as specified and directed. |
| 25 | M&L for polythene film, 150 micron thick, laid on roofs with 150 mm overlaps laid on roofs & 80 mm thick average consolidated thickness mud phuska on flat roofs including 25 mm thick mud plaster and 3 mm thick leeping plaster etc complete all as specified and as directed. |
| 26 | M&L 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement, on mud phuska complete all as specified and directed |
| 27 | All as per srl item No 26 here-in-before but using old brick tiles retrieved from dismantling (item No 22 above here-in-before) including cleaning and removal of mortar from tiles complete all as specified and directed |
| 28 | M & L PCC (1:2:4) type B-O using 12.5mm graded stone agg as in haunching ,kerb in roof or similar work compl all as specified & directed. |
| 29 | Taking down cement plaster & rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair & even and applying two coats of cement based paint over chalk whitining on walls incl preparation of new surfaces complete all as specified and directed |
| 30 | Taking down cement plaster & rendering 10 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished eben and smooth without using extra cement and applying two coats of white lime wash (white washing) incl preparation of new surfaces on walls complete all as specified and directed |
| 31 | Taking down cement plaster on ceiling surfaces & rendering 5 mm thick in cement mortar (1:3) finished even & smooth without using extra cement and applying two coats of white wash incl preparation of surfaces complete all as specified and directed |
| 32 | M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) incl demolition of brick work or stone/boulder masonary built in cement mortor complete all as specified and directed |
| 33 | Demolition of brick work built in cement mortar of any specification and in any position and using old bricks in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius retrieved from dismentling including cleaning and removal of mortar from old bricks. |
| 34 | M&L rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair & even and applying two coats of cement based paint over chak whitining on walls incl preparation of new surfaces complete all as specified and directed |
| 35 | M&L for Rendering/plastering, 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth (without using extra cement) including Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer, complete all as specified and directed. |
| 36 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm but n.exc 4 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise, complete all as specified and directed. |
| 37 | S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint ccomplete all as specified and directed |
| 38 | S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (125X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint complete all as specified and directed |
| 39 | M&L for PCC (1:3:6) type C-1 using 20 mm graded stone agg .as in filling steel frames etc including necessary form work complete all as specified and directed |
| 40 | Material and labour for PCC (1:2:4) type B1 with using 20 mm graded stone agg as in bed block hold fast block complete all as specified and directed |
| 41 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each or otherwise, complete all as specified and directed. |
| 42 | S&F 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-II, complete all as specified and directed. |
| 43 | S&F 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed |
| 44 | S&F 200 mm mild steel barrel tower bolt, stove enamelled black, with bright bolt complete all as specified and directed |
| 45 | S&F 150 mm mild steel pressed handles, oval type stove enamelled black complete all as specified and directed |
| 46 | S&F for 250 mm Mild Steel sliding door bolts plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed |
| 47 | S&F 300mm, Mild steel ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed |
| 48 | M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 49 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified and directed. |
| 50 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed |
| 51 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC \\"C\\"channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; on either side & as gap insert for top rail;panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed |
| 52 | S&F PTMT butt hinges, 100 mm long and fixed with steel screws, complete all as specified and directed. |
| 53 | S&F PTMT tower bolts, 150 mm long and fixed with steel screws, complete all as specified and directed. |
| 54 | S&F PTMT door handle, 150 mm long and fixed with steel screws, complete all as specified and directed. |
| 55 | S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each including hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, complete all as specified and directed. |
| 56 | S&Fstainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed |
| 57 | S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed |
| 58 | M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint including one coat of red oxide primer complete all as specified and directed |
| 59 | S&F in repair Mild steel curtain rod chromium plated with fixing side brackets, end cups and fixed with PVC rawl plugs & steel screws, complete all as specified and directed. |
| 60 | S&F for anodised aluminium frame for doors, windows, ventilators and patations with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 61 | S&F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 62 | S&F in repair Aluminium body hydraulically regulated Door closer universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and directed. |
| 63 | S&F 20 mm thick 2nd class hardwood boarding planed one side with butt joints fixed in shelves; Partitions, shutters and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work, including dismantling boarding of any description complete all as specified and directed |
| 64 | S&F 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed |
| 65 | S&F Mild steel butt hinge, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed |
| 66 | S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including taking up or down existing steel water tubing complete all as specified and directed |
| 67 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all connected PVC fittings and including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge. |
| 68 | S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including taking up or down existing steel water tubing complete all as specified and directed |
| 69 | Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation and fixing only, after cleaning old steel water tubing in new or old position using new fittings complete all as specified and directed |
| 70 | Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation and fixing only, after cleaning in new or old position using new fittingscomplete all as specified and directed |
| 71 | S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified and directed |
| 72 | S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed |
| 73 | S&F in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed |
| 74 | S&F in repair Vitrous china (White) flat back urinal of size 465x355x265mm with grating, union for discharge pipe, spreader, 40mm dia PVC waste pipe upto floor trap, , flush pipe, union for discharge pipe, complete all as specified and directed. |
| 75 | S&F in repairs vitreous china wash basin,white flat back,size (450X300) mm including waste coupling PTMT 32 mm,low density polylethylene pipes (LDPE) 32 mm dia 80 cm long, PVC conection 15 mm dia 450 mm long, and bracket complete all as specified and directed |
| 76 | S&F in repair 600x450 mm bevelled edge mirror of selected quality mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed |
| 77 | S&F in repair 15 mm bore Bip tap cast copper alloy chomium plated with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule. complete all as specified and directed |
| 78 | S&F in repairs 15 mm bib tap standard of PTMT any colour high pressure screwed for iron pipe (Min wt 90 Gms). complete all as specified and directed |
| 79 | S&F in repairs 15 mm stop valve of PTMT any colour high pressure screwed for iron pipe (Min wt. 90 gms). complete all as specified and directed |
| 80 | S&F in repairs 15 mm Stop valve/Angle valve cast copper alloy screwed down, high pressure screwed for iron pipe complete all as specified and directed |
| 81 | S&F for 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and including dismantling water tanks and removing to store, complete all as specified and directed. |
| 82 | S&F for 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and including dismantling water tanks and removing to store, complete all as specified and directed. |
| 83 | S&F in repairs 15 mm pillar taps, cast copper alloy, with capastan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed |
| 84 | S&F in repairs 15 ball valve, high pressure, of PTMT with epoxy coated aluminium rod and high density plastic ball,screwed for iron pipe ( min wt 142 gms) complete all as specified and directed. |
| 85 | S&F Vitreous china wash down water closet pan (pedestal pattern)white/coloured cascade type 655X355X735mm (monolithic flush cistern type) CERA Cat No: S1013207s or equivalent single picece wc with soft slim close seat cover, Hinges fixing accessories set including flush cistern with S-Trap of size 220mm all as per manufacturing instructions and all as specified and directed. (Make:Cera/Jaquar/Parryware) |
| 86 | S & F in repair to CP WHB mixer (Cera cat No: F2002461 Basin Mixer or equivalent) 15mm bore. With out popup waste system with 450mm long braided hoses Complete all as specified and directed by Engineer in Charge. (Make:Cera/ Jaquar/Parryware) |
| 87 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed |
| 88 | S&F in 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes including taking down eaves gutters and RWP complete all as specified and directed |
| 89 | S&F in 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes including taking down eaves gutters and RWP complete all as specified and directed |
| 90 | S&F in repair 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed |
| 91 | S&F in repair 75 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed |
| 92 | S&F in repair PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs complete all as specified and directed. |
| 93 | Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 94 | S & F in Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge . |
| 95 | S & F in Gypsum Board 8 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed. |
| 96 | Demolition of un-reinforced cement concrete and M&L for Cement concrete type D-2, 1:4:8 in foundations, filling and mass-concrete, complete all as specified and directed. |
| 97 | M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified & directed. |
| 98 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade with grey cement & no pigment including demolition of Stone slabs and tiles of any description laid bedded and pointed in any mortar complete all as specified and directed. |
| 99 | S&F Granite (of any type) work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of Stone slabs and tiles of any descriptionlaid bedded and pointed in any mortar complete all as specified & directed. |
| 100 | M & L Machine cut kota stone slab flooring 18-20mm thick over 15 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including demolition of Stone slabs and tiles of any descriptionlaid bedded and pointed in any mortar, complete all as specified and directed. |
| 101 | Dismantling asbestos cement (corrugated or semi corrugated) sheets and S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws in roofing complete all as specified and directed. |
| 102 | Dismantling asbestos cement (corrugated or semi corrugated) sheets and S&F for 2mm thick fibre glass reinforced translucent plain/ corrugated sheeting with two side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 103 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 104 | M&L Steel work in tubular trusses, frames, posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-24, complete all as specified and directed. |
| 105 | S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed |
| 106 | S&F in repair 20 mm gun metal,globe or gate valve, with iron wheel head , screwed both ends for iron pipe complete all as specified and directed |
| 107 | S&F in repair brass Chromium plated shower roses 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed |
| 108 | S&F in repairs brass choromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. Please Enable Macros to View BoQ information |
