|
| 1 | Demolition of Cement Concrete (Unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 2 | Material and labour for 75mm thick plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection/pavement complete all as specified and as directed. |
| 3 | Taking down cement plaster on brick or stone masonry surfaces etc including racking out joints hacking for keys, scrubbing down wth water etc. complete all as specified and as directed. |
| 4 | Material and labour for 15mm thick rendering in cement mortar 1:4, on fair faces of brick work/concrete surfaces using water proofing compound @3% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound shall be measured separately. |
| 5 | Supply only Integral water proofing compound |
| 6 | Material and labour for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 7 | Material and labour for 10mm thick rendering in cement mortar 1:4, on fair faces of brick work/concrete surfaces, finished even and smooth without using extra cement all as specified and as directed. |
| 8 | Material and labour for preparing newly plastered wall surfaces and applying two coats of oil emulsion distember paint over a coat of primer complete all as specified and as directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing materials and rubbish off the premises complete all as specified and as directed. |
| 10 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in floors and pavings etc finished even and smooth without using extra cement complete all as specified and as directed. |
| 11 | Material and labour for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 12 | Material and labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not excceding 0.11 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in cement mortar 1:6 complete all as specified and as directed. |
| 13 | Material and labour for glazed ceramic coloured tiles of size 350mm x 250mm x 7mm/450mm x 350mm x 7mm, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles on vertical surface complete including 10mm thick back coat in CM 1:4 complete all as specified and as directed. |
| 14 | Material and labour for granite 20 mm thick of any type work, table rubbed and polished, for wall lining, veneering to wall, 12mm thick in CM 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry bedded and pointed in any mortar complete all as specified and as directed. |
| 15 | Material and labour for granite 20 mm thick of any type work, table rubbed and polished, for steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4, pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including screed bed 15mm thick in cement mortar 1:4 including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry bedded and pointed in any mortar complete all as specified and as directed. |
| 16 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets all as directed. |
| 17 | Supply and fixing 'E' board (Everest make) 605 x 605 x 4 mm thick white prelaminated set & embosed, reinforced, designer ceiling board tiles of approved texture fixed at all height laid on hot dipped galvanised iron imposed grid with 24 mm wide T-section exposed flanges which shall be powder coated, white, the frame work shall comprises of main runner made from 0.33 mm thick galvanised steel sheet and of size 24 x 32 x 300 mm and spaced at 1200 mm center to center fixed to be structural soffits by approved hangers at 1200 mm rawl center, hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and fasteners and screws etc., the last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall, flush fitting of 120 mm long cross tee (with double stiching) to be interlocked between main runners at 600 mm center to center, size 1200 x 600 mm modules, cross tee longer than 600 mm to be supported independently on 600 x 600 mm moduler to be formed by fitting 600 mm long cross tee centrally between the 1200 mm cross tee. Tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19 x 19 mm and 300 mm long of white colour all as per manufacturer's instructions complete all as specified and as directed by Engr-in-Charge. |
| 18 | Supply and fix 12mm thick pre-laminated particle board, interior grade, one side with decorative choice lamination and other side balancing white, fixed with screws to timber/MS frame work complete all as specified and as directed. |
| 19 | Supply and fixing 5mm thick printed PVC sheet PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partitions inclusive of solvent cement and fixing at site complete all as specified and as directed. |
| 20 | Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed. |
| 21 | Supply and fixing 8mm thick Non-asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium frame work with screws complete all as specified and as directed. |
| 22 | Dismantling plain or corrugated steel sheet of any gauge thickness including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 23 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of 0.50mm thickness of any colour having tensile strength of 550 Mpa with coating thickness fixed with GI self taping screws as in roof covering/cladding to wall, ridges, valley gutters fixed to frame work all as per manufacturers instructions complete all as specified and as directed. |
| 24 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet of 0.50mm thickness of any colour having tensile strength of 550 Mpa with coating thickness fixed with GI self taping screws as in roof covering/cladding to wall, ridges, valley gutters fixed to frame work all as per manufacturers instructions all as specified and as directed. |
| 25 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as per specified and as directed. |
| 26 | Supply and fix roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing using mild steel section of Fe-290 Gde-E-165, beam, tee, angles, channels or flat sections including distance pieces, cleats etc complete all as specified and as directed. |
| 27 | Supply and fix wind ties for roof, cladding angle/ flat sections including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Grade E-165 complete all as specified and as directed. |
| 28 | Material and labour for preparation of surfaces of new iron and steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 29 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and precast concrete articles, removing debris material to outside MD land complete all as specified and as directed. |
| 30 | Material and labour for precast PCC 1:2:4 type B1 using 20mm graded aggregate solid block masonry exceeding 10cm width, built in cement mortar 1:4 complete all as specified and as directed. |
| 31 | Material and labour for walling of random rubble, masonary (harder stones), uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed. |
| 32 | Material and labour for 10mm thick rendering in CM 1:6 on fair faces of brick work/ concrete surfaces finished even and smooth without using extra cement including dubbing coat if required complete all as specified and as directed.Note: No extra payement will be paid for dubbing coat |
| 33 | Material and labour for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 34 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm and not exc 4 sqm & removing from site complete all as specified and as directed |
| 35 | Taking down chowkats or frames with shutters not exc 1.5Sqm each without taking off shutter from the frame & removing from site complete all as specified and as directed. |
| 36 | Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated in the solid, rounded or chamfered put together with glue, pinned at joints complete all as specified and as directed. |
| 37 | Supply and fix 30mm thick flush shutters, solid core construction, with paerticle board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 38 | Material and labour for preparation of new or previously untreated wooden surfaces of any description exceeding 10cm width or grith not otherwise specified and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 39 | Supply and fix aluminium powder coated of three track sliding window outer frame top & sides (section no-20831) of size 92.0x31.75x1.5mm weighing 1.06 Kg/m, frame bottom (section no 20832) of size 92.0x31.75x1.5mm weighing 1.248Kg/m , shutter to plain vertical (section no 21093) of size 39x18x1.5mm weighing 0.634 Kg/m, shutter interlock vertical frame (section 21094) of size 39x18x1.55 weighing 0.734 Kg/m, shutter bottom horizontal frame (section no 20551) size 40x20x1.5mm weighing 0.484 Kg/m, sliding type with out sash bars, 4mm thickness colour glass, rubber packing, snap beading screws with stainless steel wire mesh, including taking down existing window with chowkats of any size, complete all as specified and as directed by Engr-in-charge. |
| 40 | Note: i) Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.ii) Glass panel shall be measured and paid separately.iii) Thickness of powder coating shall be minimum 50 micron. |
| 41 | Supply and fix powder coated aluminium frame for windows, doors & ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and as directed.Note: Thickness of powder coating shall be minimum 50 micron |
| 42 | Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, hydraulic door closure and floor spring, handles 2 Nos in each doors, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed. Note:-Glazing/gauzing and particle board work shall be measured and paid separately. |
| 43 | Supply and fix 9mm thick pre-laminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to aluminium frame work complete all as specified and as directed. |
| 44 | Supply and fix 4mm thick coloured tinted float glass in squares and glazing with oil putty exceeding 0.5Sqm in each pane with glazing clips complete all as specified and as directed. |
| 45 | Supply and fix factory made UPVC three track sliding Window frame having 2 tracks for glass shutter and 1 track for mosquito sash made of upvc profile section of size 73mm x 42mm (wxh) having outer wall thickness of 2.0mm(+/-0.2mm). Sliding glass shutter shall be made of UPVC section of size 55mm x 33mm and sliding wire mesh shutter shall be made of UPVC section of size 40mm x 22mm. All section of the frame, sash, transom & mullion, as applicable, shall be duly reinforced with G/J/U/O shape galvanised mild steel section of required thickness considering structural /wind load requirement. System shall be provided with the suitable upvc bead for glazing of the system & fitted with inner & outer EPDM seal gaskets. clear glass of Saint Gobain/ Modiguard make with thickness of 4mm and stainless steel wire cloth of 0.19mm nominal dia. All welded joints are to be neatly trimmed & feature grooved/raised nib finish so make the finished product free from all sharp edges & burrs. All the corner /mullion /transom joints of the frame and sash shall be mitered cut & fusion welded without any mechanical joining. System shall have adequate drainage mechanism to permit the escape of water from horizontal member beneath each sealed unit. System is to be provided with proper operating & locking hardware mechanism. Window locking system will be either both side push lock system or semi-circle locking system in centre. Complete window shall be fixed in to the existing pre finished aperture, by drilling and fixing through the outer frame using quality fasteners & silicon glue is applied to fill up the crevice between wall and window frame for leak proof installation including taking down existing one complete all as specified. |
| 46 | Supply and fix solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. |
| 47 | Supply and fix factory made solid PVC moulded door shutter, 30mm thick, style, consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site complete all as specified and as directed. |
| 48 | Supply and fix 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 49 | Supply and fix 300mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing and sliding bolt of extruded section and fixed to shutter with screw complete all as specified and as directed. |
| 50 | Supply and fix 100mm butt hinges, mild steel, cold rolled, medium weight and fixed complete all as specified and as directed. |
| 51 | Supply and fix 150mm long anodised, aluminium door handle cast type fixed to shutter with screw complete all as specified and as directed. |
| 52 | Supply and fix in repairs aluminium extruded body door closer hydraulically regulated, designation No. 2 universal type with aluminium (die cast) body, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed. |
| 53 | Material and labour for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel covert governing pivot made of brass, other parts made of mild steel heavy duty including taking down existing one complete all as specified and as directed. |
| 54 | Supply and fix in repairs 20mm dia decorative type curtain rod with rings and brackets complete all as specified and as directed. |
| 55 | Supply and fix in repairs 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 56 | Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 57 | Supply and fix in repairs 15mm bore two way bib cock, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.Make:- CAT Part No-CQT 23041 of Jaquar or equivalent in make specified in PS |
| 58 | Supply and fix CP health faucet with 1M flexible tube with 8mm bore wall Hook with N.R.V (Back Flow Preventor) including taking down existing one complete all as specified and as directed by Engineer-in-Charge.Make:- CAT Part No-ALD CHR 579 of Jaquar or equivalent in make specified in PS |
| 59 | Supply and fix in repairs 15mm size PVC connection with PTMT nuts of length 450mm complete all as specified and as directed |
| 60 | Supply and fix PVC (SWR) 75mm dia of outlet, floor trap, plain with steel grating including jointing to waste pipe fixed in solvent cement including dismantling of old trap complete all as specified and as directed. |
| 61 | Supply and fix in repairs doom grating 125mm dia with waste hole of PTMT (minimum weight 40gms) complete all as specified and as directed by Engneer-in-Charge. |
| 62 | Supply and fix stop valve, cast copper alloy, screwed down, high pressure with crunch or butterfly handle screwed both ends for union and fixed for size 15mm bore pipe complete including taking down existing one complete all as specified and as directed. |
| 63 | Supply and fix in repair toilet paper holder, vitreous china, box type fixed to walls with chromium plated brass screws complete all as specified and as directed |
| 64 | Supply and fix in repairs vitreous china wash down water closet pan pedestal pattern white with including seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, but excluding PVC flushing cistern, fixing bolts and flush pipe complete all as specified and as directed. |
| 65 | Supply and fix in repairs 10 litres, PVC, valve less syphonic action type, flushing cistern, low level, with inlet, ball valve, float, handle and inclusive of brackets and connections to pipes complete all specified and as directed. |
| 66 | Supply and fix in repairs vitreous china wash hand basin, white, flat back, size 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets, 32mm dia waste pipe, cutting and pinning in ends of brackets or erecting stand and 32mm dia waste fittings, brass, chromium plated, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed. |
| 67 | Supply and fix 20mm bore dia of pipe ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule including taking down existing one complete all as specified and as directed by Engineer-in-charge. |
| 68 | Material and labour for 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including taking down existing one complete all as specified and as directed by Engineer-in-charge. |
| 69 | Supply and fix in repairs 15 mm bore chromium plated angle valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions complete all as specified and as directed |
| 70 | Supply and fix in repairs soap dish, vitreous china white, approximate size 100 x 160 x 90mm complete all as specified and as directed |
| 71 | Supply and fix in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 72 | Supply and fix in repairs tubular towel rail, brass, chromium plated, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and as directed. |
| 73 | Supply and fix in repairs 15mm bore, fancy type, chromium plated 15mm wall mixer for mixing hot & cold screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 74 | Supply and fix in repairs vitreous china urinal, flat back, size of 465 x 355 x 265mm min white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing with white cement around urinal back cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe excluding of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and as directed. |
| 75 | Supply and fix PVC (SWR) 'S' trap 110mm bore including taking down existing one complete all as specified and as directed. |
| 76 | Supply and fix brass chromium plated over head shower rose 125mm dia with with swivel joints complete all as specified and as directed. |
| 77 | Supply and fix in repairs 32mm bore waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) suitable for WHB complete all as specified and as directed. |
| 78 | Supply and fix in repairs 32mm bore waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) suitable for urinals complete all as specified and as directed. |
| 79 | Material and labour for 16mm outer dia of pipes 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., including taking down existing pipe complete all as specified and as directed. |
| 80 | Material and labour for 20mm outer dia of pipes 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., including taking down existing pipe complete all as specified and as directed. |
| 81 | Material and labour for 25mm outer dia of pipes 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., including taking down existing pipe complete all as specified and as directed. |
| 82 | Supply and fix rotational moulded polythene water storage tank ISI marked of 500 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed. |
| 83 | Supply and fix rotational moulded polythene water storage tank ISI marked of 1000 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed. |
| 84 | Supply and fix in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm, including 40 mm waste coupling brass chromium plated, discharge pipe, complete all as specified and as directed by Engineer-in-Charge |
| 85 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition) including removing the rubbish off the premises complete all as specified and as directed by Engineer-in-charge. |
| 86 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 87 | Material and labour for reinforced precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in landings, cover slabs etc with plain fair faces including setting in CM 1:4 and necessary form work complete all as specified and as directed. Note: Reinforcement will be measured seperatley |
| 88 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 89 | Material and labour for hard core (broken boulders and stones) of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick broken stone or boulders, water and rammed to a true surface complete all as specified and as directed. |
| 90 | Material and labour for cement concrete type D2 1:4:8 (40 mm graded aggregate) filling and mass concrete as in sub base complete all as specified and as directed. |
| 91 | Material and labour 100mm thick plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in sub base, sub floors, floors and pavings etc complete all as specified and as directed. |
| 92 | Material and labour for machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish, reflective type, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-40 grade complete all as specified and as directed. |
| 93 | Material and labour for machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish, reflective type, any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed. |
| 94 | Material and labour for M-sand cushioning including spreading in layers and rolled consolidated to thickness of 50mm (minimum) for receiving precast PCC interlocking blocks complete all as specified and as directed. |
| 95 | Material and labour for chequered cement concrete tiles 30cmx30cmx25mm thick set, machine pressed, heavy duty any pattern/type, chemically treated jointed and pointed in neat cement slurry in paths etc with grey cement & pigments with screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed |
| 96 | Hacking out broken glass of any thickness size, quality or description from wooden/steel frame or stone, concrete or brick surround, glazed with putty or fixed with beads complete all as specified and as directed. |
| 97 | Supply and fix plain sheet glass 4mm thick ordinary quality and glazing with oil putty not exceeding 0.5Sqm in each pane complete all as specified and as directed. |
| 98 | Supply and fix 3mm thick figured glass pin head type and glazing ordinary quality and glazing with oil putty not exceeding 0.5Sqm in each pane complete all as specified and as directed. |
| 99 | Supply and fix plain sheet glass 4mm thick ordinary quality and glazing with oil putty exceeding 0.5Sqm in each pane complete all as specified and as directed. |
| 100 | Supply and fix plain sheet glass 5.5mm thick ordinary quality and glazing with oil putty not exceeding 0.5Sqm in each pane complete all as specified and as directed. |
| 101 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc, complete all as specified and as directed. |
| 102 | Material and labour for 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes and all connected fittings complete all as specified and as directed. |
| 103 | Supply and fix floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 150mm complete all as specified and as directed. |
| 104 | Taking down carefully any type of steel rolling shutters, of size exc. 5 Sqm but n. exc. 15 Sqm each , inspecting/ notifying the defective springs, bearings, shaft, side guides, gear box, Gear box, etc including greasing and replacement of unserviceable/ defective parts and re fixing in the same and releasing the tension in the springs, lowering complete all as specified and as directed by Engineer -in-charge Please Enable Macros to View BoQ information |
| 105 | Taking down carefully any type of steel rolling shutters, of size exc. 5 Sqm but n. exc. 15 Sqm each , inspecting/ notifying the defective springs, bearings, shaft, side guides, gear box, Gear box, etc including greasing and replacement of unserviceable/ defective parts and re fixing in the same and releasing the tension in the springs, lowering complete all as specified and as directed by Engineer -in-charge Please Enable Macros to View BoQ information |
