Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Surface Dressing of the ground in any kind of soilincluding removing vegetation inequalities notexceeding 15 cm depth and disposal of the rubbishwithin a lead upto 75 m as directed. |
| 2 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 3 | Earth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layercomplete. (Payment to be made on the basis ofmeasurement of finished quantity of work)(a) With earth obtained from excavation of foundation. |
| 4 | Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) |
| 5 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 6 | Pre-Constructional Anti-termite measures:(a) Anti termite treatment to bottom surface ( in case of masonry foundation and basements) and the sides (upto a height of 300 mm. from bottom) of the excavation trenches with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. area. The work shall be carried out as per specification described in 6.2.1. of code IS- 6313 (part -II) 1981. (Mode of measurment will be the plan area of foundation treated.) |
| 7 | (d) Treatment to the back filling of R.C.C. foundation with chemical emulsion by admixing chloropyrofos emulsifiable concentrate (1% concentration) with water by weight at the rate of 7.5 ltr. per sq.m. of the vertical surface of the substructure of each side of the foundation. The work shall be carried out as per specification as described in para 6.3.1 of code IS- 6313 (part-II) 1981 (Mode of measurement will be per sq.m. of vertical area of foundation treated). |
| 8 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound s per manufacturer's specification followed by two coat of polymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required over concrete or painted surface). [Note: - Waterproofing as per item 9, polymer based paint as per item 8 (a) of subhead C of Section (C). |
| 9 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 10 | (I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)In ground floor(A) [Pakur Variety](a) 1:3:6 proportion |
| 11 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 12 | a) M-20 grade with Pakur Variety In Ground Floor and foundation |
| 13 | In First Floor |
| 14 | In Second Floor |
| 15 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, omplete as per drawing and direction. |
| 16 | (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel(JSW/JSPL/SRMB/SHYAM/SSL/ELECTROSTEEL) |
| 17 | In Ground Floor and foundation |
| 18 | In First Floor |
| 19 | In Second Floor |
| 20 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. |
| 21 | (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work |
| 22 | In Ground Floor and foundation |
| 23 | In First Floor |
| 24 | In Second Floor |
| 25 | Brick work with 1st class Bricks with cement morter (1:6)(a) In foundation and plinth |
| 26 | (b) In superstructure, ground floor |
| 27 | In First Floor |
| 28 | In Second Floor |
| 29 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 30 | In First Floor |
| 31 | In Second Floor |
| 32 | Labour for Chipping of concrete surface before taking up Plastering work. |
| 33 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and rip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] |
| 34 | (i) With 1:6 cement mortar (b) 20 mm thick plasterIn ground floor. |
| 35 | In First Floor |
| 36 | In Second Floor |
| 37 | (c) 15 mm thick plasterIn ground floor. |
| 38 | In First Floor |
| 39 | In Second Floor |
| 40 | (ii) With 1:4 cement mortar(c) 10 mm thick plasterIn ground floor. |
| 41 | In First Floor |
| 42 | In Second Floor |
| 43 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc.NOTE : Cement 0.152 cu.m. per 100 sq.m. |
| 44 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and pplicationof cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (ii) 25 mm. thick |
| 45 | In Second Floor |
| 46 | In Ground Floor Plinth Protection |
| 47 | Extra cost of labour over grey artificial stone for (i) Chequering |
| 48 | Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades. |
| 49 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I |
| 50 | (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.(B) Light Colour |
| 51 | 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment atching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m] |
| 52 | Supplying,fitting & fixing granite slab 15mm to 18mm thick in floor, lobby, stair, landing and treads etc. over 20mm (avg) thick base of cement morter (1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0 Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of all materials, labours, curing and roughening of concrete surface complete. In ground floor |
| 53 | (b) Area of each Granite slab 0.6 to 1.0 Square meter.In Ground Floor |
| 54 | In First Floor |
| 55 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by ynthetic adhesive & grout materials etc. |
| 56 | (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. |
| 57 | (a) Area of each tile upto 0.09 Sq.m(ii) Other than Coloured decorative including white |
| 58 | (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. |
| 59 | (a) Area of each tile upto 0.09 Sq.m(ii) Other than Coloured decorative including white |
| 60 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) |
| 61 | In ground floor. |
| 62 | In First Floor |
| 63 | In Second Floor |
| 64 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats |
| 65 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (b) Two Coats |
| 66 | In ground floor. |
| 67 | In First Floor |
| 68 | In Second Floor |
| 69 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. |
| 70 | In Ground floor (Two Coat)c) Super Protective 100% Acrylic Emulsion. |
| 71 | In ground floor. |
| 72 | In First Floor |
| 73 | In Second Floor |
| 74 | Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. |
| 75 | Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. |
| 76 | In ground floor. |
| 77 | In First Floor |
| 78 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. In ground floor. |
| 79 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.In Second floor. |
| 80 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. |
| 81 | (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) |
| 82 | (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 83 | In ground floor. |
| 84 | In First Floor |
| 85 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) |
| 86 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 87 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : |
| 88 | (b) On steel or other metal surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 89 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white |
| 90 | For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr. For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr. |
| 91 | Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door vertical) , glazing clip made of Aluminium Alloy Extrusions conforming to IS: 733-1983 and IS: 1285-1975, annodized conforming to IS:1868- 1983, fitted with all other accessories viz. EPDM gusket,cleat, angle screws etc. including labour charges for fitting and fixing of aluminium door with door spring,/aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-in- charge. ( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer, door stoper, handle, tower bolt and locking arrangment etc) 10-12 Micron thickness Annodizing film Natural white |
| 92 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any SI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work). |
| 93 | I) Natural whiteh) Louvered window. |
| 94 | i) Top, bottom and side member. |
| 95 | ii) Louvered Section. |
| 96 | iii) Cleat angle ( Non-annodized). |
| 97 | g) Fixed glazing.i) Top, bottom and side member. |
| 98 | ii) Mullion. |
| 99 | iii) Glazing clip. |
| 100 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm. |
| 101 | Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer- in -Charge.ii) 100 mm. |
| 102 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:- |
| 103 | (A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine r EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The ate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. |
| 104 | iv ) Fixed glazing. |
| 105 | v ) Louvered window. |
| 106 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. |
| 107 | i) 4mm thick clear glass. |
| 108 | viii) 8mm thick coloured / tinted / smoke glass. |
| 109 | Providing, fitting and fixing in position, medium density fibre board conforming to IS: 12406-1988 for plain and IS: 14587-1998 for prelaminated made of wood fibre bonded with Urea formaldehyde for interior grade and Phenol Formaldehyde for exterior grade conforming to per IS:848-1974 as per approved make and brand as per direction of Engineer-in-Charge. In Ground Floor |
| 110 | (A) Plain :(C) Both side decorative lamination(II) Interior Grade (ii) 12mm |
| 111 | In Ground Floor |
| 112 | In First Floor |
| 113 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:(a) With continuous plate base (Hexagonal/ Round rod)(iv) 125 mm grip x 10 mm dia rod. |
| 114 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: |
| 115 | (vii) 225mm long x 10mm dia. bolt. |
| 116 | (iv) 150mm long x 10mm dia. bolt. |
| 117 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.(b) 250mm long. |
| 118 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, alamoid/Bitumen/M-Seal etc) complete. |
| 119 | A) UPVC Pipes: (ii) 110 mm. Dia. |
| 120 | B) UPVC Fittings:a) Plain Tee (ii) 110 mm. Dia. |
| 121 | b) Plain Y (ii) 110 mm. Dia. |
| 122 | c) Bend 87.5 degree (ii) 110 mm. Dia. |
| 123 | d) Shoe (ii) 110 mm. Dia. |
| 124 | Sanitary & Plumbing WorksSupplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia) |
| 125 | 40 mm |
| 126 | (b) For Concealed Work(Dia) |
| 127 | 15 mm |
| 128 | 20 mm |
| 129 | 25 mm |
| 130 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). |
| 131 | (ix) 15 mm dia |
| 132 | (viii) 20 mm dia |
| 133 | (vii) 25 mm dia |
| 134 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. |
| 135 | (b) For Concealed Work (i) CPVC Pipes Class-1,SDR-1115 mm |
| 136 | Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 137 | (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 138 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer(d) 2000 litre capacity |
| 139 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 140 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 141 | Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. (ii) 550 mm X 400 mm size |
| 142 | Supplying, fitting and fixing White Vitreous China Sink in position on C.I. brackets including two coats of painting of brackets.(b) Laboratory sink with rim and overflow(i) 450 mm X 300 mm X 150 mm |
| 143 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (ii) 450 mm long |
| 144 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iii) 900 mm long |
| 145 | Supplying, fitting and fixing 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510, 510(A) and Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand). |
| 146 | Supplying, fitting and fixing pillar cock of approved make.a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 147 | Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides). (iii) 150 mm |
| 148 | Supplying, fitting and fixing with cement jointing (3:1) with jute gasket soaked in cement mortar.(a) Stoneware bend(iii) 150 mm |
| 149 | (b) Stoneware single T or Y junction(ii) 150 mm |
| 150 | Supplying, fitting and fixing C.I. round grating.(i) 100 mm |
| 151 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Length (b) 110 mm |
| 152 | Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing older bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer- in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. |
| 153 | (A) Above ground(ii) 110 mm dia. |
| 154 | (B) Under ground(ii) 110 mm dia. |
| 155 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 |
| 156 | viii) Double Y with Door (b) 110 mm |
| 157 | xi) Door Bend (T.S.) (b) 110 mm |
| 158 | xv) Vent Cowl (b) 110 mm |
| 159 | xvi) Pipe Clip (b) 110 mm |
| 160 | (ii) Plain Tee (b) 110 mm |
| 161 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap |
| 162 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).(i) 450 mm X 350 mm |
| 163 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C.(ii) Plastic (hallow type) white |
| 164 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.i) Polythene Flush Pipe |
| 165 | Supplying, fitting and fixing liquid soap container.(c) Fibre glass |
| 166 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 167 | Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass(i) 25 mm dia. and 450 mm long |
| 168 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. |
| 169 | i) With Pakur variety.(JSW.JSPL/SHYAM/SRMB/SSL/ELECTROSTEEL/BMASL) |
| 170 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. |
| 171 | (JSW.JSPL/SHYAM/SRMB/SSL/ELECTROSTEEL/BMASL) |
| 172 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. |
| 173 | (ii) For 20 usersi) With Pakur variety.(JSW.JSPL/SHYAM/SRMB/SSL/ELECTROSTEEL/BMASL) |
| 174 | (I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety](a) 1:3:6 proportion |
| 175 | Sinking of (100mm x 50mm dia) Tube WellLabour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them andlowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in betweenthe outside of the tubewell pipe and the bore. |
| 176 | (d) For depth upto 150 metre for 50 mm dia. tube well with top enlargement of 100 mm dia.(i) 50 mm dia. boring etc. |
| 177 | (ii) 100 mm dia. boring etc. top enlargement |
| 178 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239(Part - I). |
| 179 | PVC Pipes(Dia)50 mm |
| 180 | 100 mm |
| 181 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.(ii) 50 mm dia. |
| 182 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-in- charge including cost of all materials labour and equipment complete. |
| 183 | Packing annular space between the outside of the housing pipe and the bore with puddled clay balls of approved size as per direction of the Engineer-in-charge with cost of all materials and labour complete. |
| 184 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.(ii) 50 mm dia. |
| 185 | Supplying, fitting and fixing plug of approved make conforming to I.S. specifications.(ii) 50 mm |
| 186 | Supplying, fitting and fixing heavy type bell mouth reducing socket.(i) 50 mm X 100 mm |
| 187 | Supplying, fitting and fixing G.I. cap at top(i) 100 mm |
| 188 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. |
| 189 | Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete. |
| 190 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. |
| 191 | Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality. |
| 192 | Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necessary report. |
| 193 | Supplying, fitting and fixing in position G.I. pipes of TATA make for underground works with all necessary accessories,specials viz.socket, bend, tee, union, cross, elbow, nipple, short piece etc.including cost of all materials,jointing materials ,cutting pipes,making threads,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting on G.I. pipes and specials with bituminous paint complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.Payment for painting will be made seperately)(iv) 32 mm dia. medium quality |
| 194 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).(vii) 25 mm dia |
| 195 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) |
| 196 | (a) For Exposed Work PVC Pipes(Dia)32 mm |
| 197 | Supplying and Installation of 2.0I—I.P. 415V 3 Phase Bore well 2 vertical submersible pump including Control panel and labour . charges with all other incidental charges complete. |
| 198 | Supplying , fitting and fixing for 2.5sqrn1n 3 core submersible flat cable |
| 199 | Sub-Head 1-Distribution WiringDistn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3mm thick) flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC |
| 200 | Average run 6 mtr [ 2 (i) / E- 9 ] |
| 201 | Average run 7 mtr [ 2 (ii) / E- 9 ] |
| 202 | Average run 8 mtr [ 2 (iii) / E- 9 ] |
| 203 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light point with 2 no. 2 way piano key type switch fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works [PVC casingcapping on surface and Switch board concealed] 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC |
| 204 | Average run 9 mtr [ 5(a) / E- 12 ] |
| 205 | Sub-Head 2- Polythene pipe & WireSupplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required |
| 206 | 3 x (1.5 sqmm) [ 1(b) / E-9 ] |
| 207 | 2x(2.5 sqmm) + 1x(1.5 sqmm) [ 1(s) / E-9 ] [Power &20A Board] |
| 208 | 2x(4 sqmm)+1x (2.5 sqmm) [ 1(v) / E- 9 ] [AC Point] |
| 209 | 2x (6 sqmm) + 1x (4 sqmm) [1(y) / E- 9 ] ] [HTPN DB to SPNDB ] |
| 210 | 4x (10 sqmm) + 2x (6 sqmm) [1(d1) / E- 9 ] [UPS ] |
| 211 | Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction |
| 212 | 19mm dia 3mm thick [ 1 (b)/ E- 2 ] |
| 213 | 25mm dia 3mm thick [ 1 (c)/ E- 2 ] |
| 214 | Cutting Channel of size (31 mm x 31 mm) on RCC plastered ceiling by Electric operated cutting machine incl. supplying & fixing heavy gauge 13 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles |
| 215 | 19 mm dia 3 mm thick polythene pipe without earthcontinuity wire [ 8(a)/ E- 3 ] |
| 216 | Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by eans of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own ools and tackles. |
| 217 | 25 mm dia 3 mm thick polythene pipe without earthcontinuity wire [7(a) / E- 3 ] |
| 218 | Sub-Head 3- Switch board &SocketDistn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC |
| 219 | On Board [4a(i) / E- 10 ] |
| 220 | Average run 6 mtr [4a(v) / E- 10 ] |
| 221 | Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [CPU Board ] [24 / E- 7 ] |
| 222 | Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [22 / E- 6 ] |
| 223 | Supply & Fixing 240 V, 2 nos. 6A, & 2 nos. 20A plug socket with separate 2 nos. 6 A & 2 nos. 20A Piano key type switch,indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [Power Board ] [ 28 / E- 7 ] |
| 224 | Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [Ac Board ] [ 18 / E- 19 ] |
| 225 | SUB-HEAD 4: DISTRIBUTION BOARDS/BUSBAR/MAIN SWITCHSupplying and fixing double door Vertical TPN MCBDistribution board for MCCB incomer with IP-42/43protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment |
| 226 | 8 Way ( Up to 160 A ) Make - Legrand/Siemens /L&T as approved by E.I.C ] [15 / D- 11 ] |
| 227 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment |
| 228 | 6 Way Make - Legrand,/Schneider/ Crabtree/ L&T/Siemens as approved E.I.C] [ 14 / D- 10 ] |
| 229 | 8 Way Make - Legrand,/Schneider/Crabtree /L&T/Siemens as approved E.I.C] [ 14 / D- 10 ] |
| 230 | Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment |
| 231 | 6 way HTPN DB [ 16 / D- 12 ] |
| 232 | 8 way HTPN DB [ 16 / D- 12 ] |
| 233 | 8 way Vertical DB [ 16 / D- 12 ] |
| 234 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment |
| 235 | 2+16 Way [Siemens /Schneider or equivalent model of Legrand/L&T] as approved by EIC. [ELDB,LDB 2 ] [ 13 / D- 9 ] |
| 236 | 2+12 Way [Siemens /Schneider or equivalent model of Legrand/L&T] as approved by EIC. [LDB 1 ] [ 13 / D- 9 ] |
| 237 | Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment |
| 238 | 4 Way [UPS:2,MAINS:3] [ 11 / D- 9] |
| 239 | Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection [ Make - Legrand /L&T/Siemens as per direction of EIC.]. |
| 240 | 125 A [ VTPN I/C] [10/ D- 8 ] |
| 241 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [Make-Legrand/ Schneider/Siemens/Crabtree/L&T) as per direction of EIC. ] |
| 242 | 6-32A SP MCB [ NDB1,2,ELDB1,LDB1,2 O/G] [ 7 / D- 6] |
| 243 | 40A SP MCB [ NDB2 O/G-LDB 2] [ 7 / D- 6] |
| 244 | 63 A FP ISOLATOR [ NDB 1,2 I/C] [ 6 / D- 5 ] |
| 245 | 40A TP MCB [ VTPN O/G to UPS] [ 7 / D- 6] |
| 246 | 63A TP MCB [ VTPN O/G to NDB 1,2,SPARE] [ 7 / D- 6] |
| 247 | 40 A FP ISOLATOR [ 4 WAY,EDB I/C] [ 6 / D- 5 ] |
| 248 | 40 A DP ISOLATOR [ LDB2 I/C] [ 6 / D- 5 ] |
| 249 | 32 A DP ISOLATOR [ LDB1,ELDB1 I/C] [ 6 / D- 5 ] |
| 250 | SUB-HEAD 5 --MAIN SWITCHSupplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [Make-Legrand/ Schneider/Siemens/ Crabtree/ L&T ] |
| 251 | 125 A [ 4(a) / D- 3 ] |
| 252 | Supply of 2 mm thick wooden ply board of size 3ftx2 ft and fixing the same in wall by necessary nuts,bolts,incl.supply and fixing of 3 nos 100A,415V,porcelain fuse carried and base(Havells/L&T) and neutral bar at wooden |
| 253 | SUB-HEAD 6 --CHANGE OVER SWITCHSupplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc [Make-Legrand/ Schneider/Siemens/ Crabtree/ L&T] |
| 254 | 125 A [ 3(a) / D- 2 ] |
| 255 | SUB-HEAD 7 --BUSBARSupplying & fixing 415V,125A, sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl.earthing attachment and painting as required. Dimension of Al. bars [85mm long][4 x 25x5mm]and Dimension of Sheet Metal Box[500x150mm]. [19(a)/D-12] |
| 256 | Sub-Head 8- Supply &fixing of Fans etc.Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. [18(a)/E-6] |
| 257 | Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. [31/D-14] |
| 258 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [21(a)/C-3] |
| 259 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter |
| 260 | 30 cm (12\\") [28(b)/C-4] |
| 261 | Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) |
| 262 | 30 cm 12 \\" [32(a)/D-14] |
| 263 | Supplying & Fixing 240 V AC Buzzer (Ancho) on HW board incl. S&F HW board [20(b)/D-13] |
| 264 | Sub-Head 9- Supply of Fans etc.supply &delivery of sweep:48\\"(1200) AC ceiling fan,50-70 Watts,speed:->=350 RPM,Air delivery :>=220 CMM,make:(Orient PSPO NEWBREEZE or SUMMERCOOL/equivalent of EPC or USHA STRIKER PLUS or CROMPTON [NS] |
| 265 | supply &delivery of sweep:36\\"(900) AC ceiling fan,50-70 Watts,speed:->=380 RPM,Air delivery :>=145 CMM,make:(Orient PSPO NEWBREEZE or SUMMERCOOL/equivalent of EPC or USHA STRIKER swift or CROMPTON [NS] |
| 266 | supply&delivery of heavy duty Exhaust Fan of Sweep:-12\\"(300),240 volt,50 Hz,AC,50-60 Watts,Speed>900RPM,Air delivery>=1145 CMM suitable for [Make-Orient/EPC/CG] [NS] |
| 267 | Sub-Head 10-Laying on Wall / surface with Saddles / clamps Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting [2(c)/F-1] |
| 268 | Sub-Head 11 -Laying in Underground TrenchLaying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed [b/F-2] |
| 269 | Sub-Head 12- cable terminationSupplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below |
| 270 | 4 core 50 sqmm [7(c)/F-4] |
| 271 | 4 core 35 sqmm [7(c)/F-4] |
| 272 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required |
| 273 | 65 mm dia [7(e)/F-6] |
| 274 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials |
| 275 | 3½ core 50 sqmm cable [8b(xvi)/F-5] |
| 276 | 3½ core 35 sqmm cable [8b(xv)/F-5] |
| 277 | Sub-Head 13- supply of cable Supplying of 1.1 KV. Grade LT power cable ,XLPE insulated, cores laid up,PVC inner sheathed aluminium armoured conductor of the following specification : - (make: Polycab/Gloster/RR) |
| 278 | 4 core 50 sqmm (A2XWY/AXFY) [NC] |
| 279 | Supplying of 1.1 KV. Grade LT power cable ,XLPE insulated, cores laid up,PVC inner sheathed aluminium armoured conductor of the following specification : - (make: Polycab/Gloster/RR) |
| 280 | 4 core 35 sqmm (A2XWY/AXFY) [NC] |
| 281 | Sub-Head 14- EarthingEarthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: |
| 282 | By ISI-Medium GI pipe [DG Body:2,D.G.Neutral:2,VTPN DB:1 UPS:1] [2(a)/G-1] |
| 283 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [3(a)/G-2] |
| 284 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [4(a)/G-2] |
| 285 | Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. [4(c)/G-3] |
| 286 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages [4(c)/G-3] |
| 287 | No. 6 SWG [5a(ii)/G-2] |
| 288 | Sub-Head 15- Tele.TV&Data PointSupply & Fixing RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required [8(a)/E-18] |
| 289 | Supply & Fixing Telephone socket (RJ11) Modular type (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required [8(b)/E-18] |
| 290 | Sub-Head 16- Telephone and networking cableSupplying & Drawing 2-pair Telephone cables with high density polyethylene insulated solid annealed high conductivity bare copper of dia 0.5mm in prelaid PVC rigid conduit/ in polythene pipe embeded in wall [22/E-19] |
| 291 | Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) in prelaid PVC rigid conduit/ in polythene pipe embeded in wall. [21/E-19] |
| 292 | Supplying and fixing PVC casing-capping [Precision Make] on wall or ceiling, incl. necy. PVC fittings etc. and mending good damages to building works |
| 293 | 20x10mm Size [10(a)/E-13] |
| 294 | Sub-Head 17-Supply &fixing Led LightSupply & delivery of single 4ft LED tube light fittings incl.4 ft LED tube, 1200 mm,Efficacy>= 100 lm/W, THD<10%, complete with all accessories,( Mas LED tube 1200 mm)[ Philips TMC 501 P 1X T-LED 22 W P3241] or equivalent of wipro, Crompton etc. NON-Schedule |
| 295 | Supply & Delivery at site 9 watt LED Bulb, Efficacy>=90 lm/W, Base Cap:-B22 [Make-Crompton] or equivalent of wipro, Philips etc. NON-Schedule |
| 296 | Supply & Delivery of 45 watt LED Outdoor Type Luminiares along with all accessories complete as required Efficacy>=110 lm/W, Pole dia.>=32 mm [ Crompton- modelno-LSTS-45-CDL-M] or equivalentof wipro, Philips etc. NON-Schedule |
| 297 | Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener [14(b)/C-2] |
| 298 | Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length [17/C-2] |
| 299 | Fixing only lamp [11/C-2] |
| 300 | Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. [18/C-3] |
| 301 | GST @ 18%(Except item no 96 & 97) |
| 302 | L.W.C. @ 1%(Except item no 96 & 97) Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
