|
| 1 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provisionfor earthing attachment 4 way Legrand with MCB as per GS (Legrand/Schneider/ABB/L&T) |
| 2 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthingattachment.2+12 way (Legrand/Schneider/ABB/L&T) |
| 3 | Supplying and fixing 240 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. a)6-32 A SP MCB (Legrand/Schneider/ABB/L&T) |
| 4 | 63A FP MCB (Make-Legrand/Schneider/ABB/L&T) |
| 5 | Supplying and fixing 240/415 V MCB Isolator ondin rail of existing DBs and necessary connection. DP 40 A (Make-Legrand/Schneider/ABB/L&T) |
| 6 | Cutting channel of 40 mm x 40 mm size on masonary wall incl. S&F heavy guage polythene pipe dia as stated below by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. Mending good damages to building works. [For AC point (a) 19 mm dia 3 mm thick polythene pipe with out earth continuity wire. |
| 7 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. |
| 8 | a) 2 X 4sqmm. + 1 X 2.5sqmm. |
| 9 | b) 2 X 2.5sqmm. + 1 X 1.5sqmm. |
| 10 | c) 3x 22/0.3(1.5sqmm.) |
| 11 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] (Average run 8 mtr). |
| 12 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by E.I.C) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC (On Board) |
| 13 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.( for AC). |
| 14 | Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 15 | Supply & Fixing 240 V, 16/20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (For power point). |
| 16 | Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (5A. Separate plug)(for each Bed Room, kitchen,drawing room) |
| 17 | S & F Angular Holder with 9W LED lamp( make: Phillips/CG)(Analysis Enclosed) |
| 18 | S/F Double LED Tube Light fittings TMC 501 with Mas LED Tube 18W (Phillips/havells/Crompton) |
| 19 | S/F Single LED Tube Light Mas LED Tube 18W (Phillips/havells/ Crompton) |
| 20 | Supply only New 250v , 65w, A.C sweep Ceiling fan, 1400 mm,with P2 capacitor, Brown (Crompton Greaves/Usha Striker Plus) with Multi gauge steel wire protection. |
| 21 | Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc. |
| 22 | S & Fixing exhaust fan, Louver shutter after making hole in wall and mending good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia as follows (make: EPC Heavy duty) |
| 23 | a)12\\" exhaust Fan |
| 24 | S&F of required size solderless Cu socket of following Cu wires. |
| 25 | a) 4sq mm |
| 26 | b)2.5Sqmm |
| 27 | c) 1.5 sqmm |
| 28 | d) 10 sqmm |
| 29 | Opening the fans part by part for cleaning the bearing with kerosene oil ,greasing, over hauling, loop changing,heat varnishing & refitting the same and checking the speed as per direction of E.I.C. |
| 30 | S & F ball bearing the fans(FBJ/SKF/NB make) |
| 31 | a)6201 |
| 32 | b)6202 |
| 33 | S & F Bush for the fans |
| 34 | S & F 2.50 MFD Condenser. (Make Tibcon oil filled) |
| 35 | S & F fan down rod wire (changing by 23/36 cu. Wire up to 1 meter) |
| 36 | S/F Shaft of Fans |
| 37 | S & F fan jam nut, blade screw etc. |
| 38 | S & F heavy gauge split pin as per sample |
| 39 | S & F condenser carrier |
| 40 | S & F Bobbin Insulator |
| 41 | Servecing of wall fans |
| 42 | Rewinding the armature of the ceiling fans with appropriate gauge of cu. Wire with mica sheet and approved quality varnish |
| 43 | Dismantling existing damaged & unservicecable electrical installation with owns tools & takles incl. Mending good damages as per GS and clearing/removing from the site. Please Enable Macros to View BoQ information |
