|
| 1 | Construction of Community Hall |
| 2 | Layout of Building including all labours t &p required for proper completion of work as per direction of Engineer in charge. |
| 3 | Earth work Excavation in trenches for foundation. in ordinary soil (loan clay or sand) including lift up to 1.50 m and lead upto 50 m. |
| 4 | Boring with hydraulic piling rigs with power unit ,providing and ininstalling cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete ,to carry of safe working load not less than specified .excluding the cost of steel reinforcement bul including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete (length of pile for payment shall be measured upto to the bottom of pile cap) 300MM DIA |
| 5 | Extra over single under ream for providing additional bulbs in under reamed piles, under specified (only the Nos. of extra bulbs are to be paid) |
| 6 | Earth filling in plinth under floors including watering ramming, consolidating and dressing etc. complete including lead upto 30 m. and lift upto 1.5 m. including cost of supplied earth. |
| 7 | Sand filling in flooring includng watering ramming etc complete. |
| 8 | Providing and laying in cement concrete 1:4:8 (1cement:4 coarse sand:8 graded stone aggregate 40 mm nominal size and curing complete, including cost of formwork in foundation and floors. |
| 9 | First class brick work in 1:6 cement and coarse sand mortar in foundation including supply of all plants etc. required for proper completion of the work. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for :column,plinth bend,lintel,sunshade,platform & slab. |
| 11 | R.C.C. works with cement approved coarse sand and 20 mm approved stone aggregate in the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excluding supply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P Foundation |
| 12 | R.C.C. works with cement approved coarse sand and 20 mm approved stone aggregate in the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excluding supply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P Plenth beam |
| 13 | R.C.C. works with cement approved coarse sand and 20 mm approved stone aggregate in the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excluding supply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P COLUMN |
| 14 | R.C.C. works with cement approved coarse sand and 20 mm approved stone aggregate in the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excluding supply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P Lintal beam |
| 15 | R.C.C. works with cement approved coarse sand and 20 mm approved stone aggregate in the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excluding supply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P Slab Band |
| 16 | R.C.C. works with cement approved coarse sand and 20 mm approved stone aggregate in the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excluding supply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P Slab |
| 17 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. |
| 18 | First class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all plants etc. required for proper completion of the work. |
| 19 | First class brick work in 1:6 cement and coarse sand mortar in superstructure including supply of all plants etc. required for proper completion of the work. |
| 20 | First class brick work in 1:4 cement and coarse sand mortar in superstructure including supply of all plants etc. required for proper completion of the work. |
| 21 | 12/15 mm wall plaster 1:4 cement :coarse sand including cost of all material labour T&P etc.complete. |
| 22 | 6-10 mm thick ceiling plaster 1:3 cement :coarse sand including cost of all material labour T&P etc.complete. |
| 23 | Providing, fabriction and fixing of ms angle iron chaukat make of 40*40*6 mm and 35*35*5 mm angle iron including supply of all material Labour T.& P. etc. complete as per direction of Engineer in charge. |
| 24 | Providing, fabrication and fixing of Z-section windows, ventilators openable type with 10 mm sq bar grill as per approved drawing and design including supply of all material Labour T.& P. etc. complete as per direction of Engineer in charge. |
| 25 | Providing of Pcc with 1:2:4 cement coarse sand and stone aggregate for fixing of hold fast. |
| 26 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 27 | Providing and fixing ISI marked oxidised M.S sliding door bolts with nute and screws etc. complete 250mmx16mm |
| 28 | Providing and fixing ISI marked oxidised M.S handles conforming to IS: 4992 with necessary screws etc. complete 125mm |
| 29 | Providing and fixing ISI marked oxidised M.S tower bolts black finish (Barrel type) with necessary screws etc. complete 200x10 mm |
| 30 | Providing and fixing ISI marked oxidised M.S tower bolts black finish (Barrel type) with necessary screws etc. complete 150x10 mm |
| 31 | 40mm. thick in flooring 1:2:4 cement: coarse sand:20 mm. stone aggregate with floating coat of neat cement including cost of all materials Labour and T & P etc. complete |
| 32 | Fixing of glass stripsProviding and fixing glass strips in joints of terrazo/ cement concrete floors.40 mm wide and 4 mm thick |
| 33 | Providing and fixing ceramic glazed wall tiles as per direction of Engineer-in-Charge,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. |
| 34 | Providing and laying Ceramic glazed floor tiles as per direction of Engineer in charge laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc, complete. |
| 35 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4(1 cement : 4 coarse sand) : |
| 36 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound. |
| 37 | Providing and applying two coat white cement Based wall care putty of approved make over the plastered wall surface to prepared the surface evev and smooth complete. |
| 38 | Finishing walls with two coat acrylic smooth exterior paint of approved shade with in new work applied @ 1.67 litr /10 sqm over and including primimg coat of exterior primer applied @2.20 kg /10 sqm. |
| 39 | Oil Bound destermper paint inner side wall |
| 40 | Painting with synthetic enamel paint two coats of approved brand and manufacture of required colour to give an even shade. |
| 41 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes |
| 42 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes. |
| 43 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 44 | Providing and fixing precoated galvanised iron profile sheets size ,shape and pitch of corrugation as approved by Engineer -in-charge)0.50 mm(+0.05%) total coated thickness with zinc coating,120 grams per Sqm. as per IS:277 in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns epoxy primer on both side of the sheet should have protective goard filmof 25 microns minimum to avoide scratches during tranportation and should be supplide in single length upto 12 meter or as including cutting sheets to size and shape wherever required. |
| 45 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete. |
| 46 | Making of apron drain. |
| 47 | Earthwork in Excavation |
| 48 | P.C.C 1:4:8 |
| 49 | B/W in 1:4 Cement Coarse Sand |
| 50 | 15 mm thick plaster (1:3) coarse sand |
| 51 | 25mm thick c.c. Flooring |
| 52 | Construction of Septic tank 25User. |
| 53 | Earth work in excavation |
| 54 | L.C.1:4:8 c:c/s:40 m.m.stone /ballast |
| 55 | Brick work 1:4 c:c/s mortar |
| 56 | R.C.C.1:1.5:3 c:c/s:s/g mortar |
| 57 | Tmt -Steel |
| 58 | 40 m.m. P.C.C. Flooring 1:2:4 c:c/s :s/g with floating coat |
| 59 | 12 m.m.thick plaster 1:3 c:c/s mortar with neat cement finishing |
| 60 | Construction of soak pit 2.00 m dia and 2.50 m depth with all respect. |
| 61 | Construction of manhole 600x600x450 mm with all respect. |
| 62 | Tube well Boring with submersible (1 HP) and India mark ii hand pump complete. |
| 63 | Drilling including running of necessary pilot bore by reverse direct circulation rotary rig in alluvial soil (except of rock) etc.,including transportation and all accessories and returning back from site after completion. 150 mm Dia bore from G.I.to 45 meter |
| 64 | Drilling including running of necessary pilot bore by reverse direct circulation rotary rig in alluvial soil (except of rock) etc.,including transportation and all accessories and returning back from site after completion. 150mm Dia bore from G.I. to 46-85 meter |
| 65 | Supply and packaging the bore with gravel of 1.5mm to 5.00 mm nominal size. |
| 66 | P/F of 110 (O.D.) P.V.C. 6kg/sq.cm. screen of superior quality I.S.I |
| 67 | P/F of 110 (O.D.) P.V.C. 6kg/sq.cm. I.S.I. mark superior quality pipe with socket and joining special of complete extra teflon roll. |
| 68 | P/F at required depth 110mm bottom bail plug with hook complete and screwed. |
| 69 | P/F of M.S. Clamp made up 75x12mm with 30cm projection on either side to be fixed surrounding the pipe with cost of concrete block to embedden in floor. |
| 70 | P/F at required depth 110mm M.S. well cap 6mm thick M.S. sheet duly threded on side surface. |
| 71 | Development of bore well by compressor/high discharge pump and removal of mud etc. complete the discharge should be free from sand and silt. |
| 72 | P/F of BESTEN/KSB/VARUNA/CROMPTON make submersible pump of ISI (1.00 HP) 1/3 phase of AC type or DC tpe complete with starter panel and making connection of starter to source of electric supply. Including no. of stages as required to sufficient discharge and head for AC tye warranty will be 1years and for DC type 5years. |
| 73 | S/F of submersible cable of 3core 2.5sqm copper wire water proof. |
| 74 | S/F of steel wire for clamping of submersible pump. |
| 75 | P/F of 40mm HDP pipe rool/32mm G.I. Pipe. |
| 76 | 40mm elbow |
| 77 | Lowering of submersible pumpm with complete clamping steel wire,cable and jointing of 32mm PVC pipe with teflon roll and fixing of starter panel etc. |
| 78 | S/F of M.S.clamp for Submersible pump. |
| 79 | Testing of water to find all data required for RO |
| 80 | Construction of brick chamber 450x450x300mmwith RCC cover |
| 81 | Providing and Laying interlocking Paver bricks tile in Flooring 60mm thick |
| 82 | Sanatary Work |
| 83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20MM DIA |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25MM DIA |
| 85 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20mm DIA |
| 86 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20MM DIA |
| 87 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore |
| 88 | Providing and fixing uplasticised P.V.C. connection pipe with brass unions 45 cm length and 15 mm nominal bore |
| 89 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 90 | Making plate form for supporting the water storage tank of required size including brick work with 1:4 cement coarse sand and 20 mm thick plaster in 1:3 cement coase sand mortar and neat cement finishing complete |
| 91 | Providing and fixing brass bib cock 15 mm of approved quality prayag or equilent make. |
| 92 | Providing and fixing c.p angle valve of approved quality prayag or equilent make. |
| 93 | Cutting holes upto 30x30 cm in walls including making good the same : With F.P.S. bricks. |
| 94 | Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. |
| 95 | Providing and fixing of C.P. soap disc of approved quality. |
| 96 | Making of brick pillars for supply to hold the GI/CI pipe line of 230x230x230mm size including B/w and plaster complete |
| 97 | Making of water tank connection inlet, outlet, overflow, clean outlet each point |
| 98 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 99 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 100 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 101 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510 mm bowl depth 200 mm |
| 102 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm |
| 103 | Providing and fixing P.v.c waste and vent pipes of approved make 110 mm dia. |
| 104 | Providing and fixing of Pvc nahani trap 90 mm of approved make |
| 105 | Construction of BOUNDARY WALL |
| 106 | Clearing of Jungle uprooting of roots veg., grass etc including all Labour T&P etc. |
| 107 | Boring with hydraulic piling rigs with power unit ,providing and ininstalling cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete ,to carry of safe working load not less than specified .excluding the cost of steel reinforcement bul including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete (length of pile for payment shall be measured upto to the bottom of pile cap) |
| 108 | Extra over single under ream for providing additional bulbs in under reamed piles, under specified (only the Nos. of extra bulbs are to be paid) |
| 109 | RCC in 1:1.5:3 cement ,c/ sand. 20 mm nominal size s/grit including necessary shuttering it cantering with all material labour t & P etc complete |
| 110 | First class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all plants etc. required for proper completion of the work. |
| 111 | RCC in 1:1.5:3 cement ,c/ sand. 20 mm nominal size s/grit including necessary shuttering it cantering with all material labour t & P etc complete |
| 112 | 15 mm thick wall plaster in 1:6 cement c/sand mortar with n.c.f.including all material labour t&p and scaffolding |
| 113 | Mild Steel of iron in plain work such as reinforced concrete of reinforced brick work (when not included in as over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage ans over lapping and hooks |
| 114 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work Two or more coats applied on walls @ 1.25 ltr/10 sqmover and including one coat of Special primer applied @0.75 ltr /10 sqm Two coat weather coat Apex/ultima 142.20/112*100 |
| 115 | Providing and fixing MS Angle iron Post 50x50x5 y shape |
| 116 | Providing and fixing 3 Row barbed wire fencing |
| 117 | Providing and fixing Concentrena wire fencing |
| 118 | Construction of Gate |
| 119 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works |
| 120 | Electrical Work |
| 121 | Wiring for light point/fan point /exhaust fan point /call bell/Sodium point with 1.50 Sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable G I box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core etc. as required. Group C |
| 122 | Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 123 | Wiring for Circuit/Submain wiring along with earth wire with the Following size FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire |
| 124 | Wiring for Circuit/Submain wiring along with earth wire with the Following size FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire |
| 125 | Wiring for Circuit/Submain wiring along with earth wire with the Following size FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 x 6 sq. mm + 1 x 6 sq. mm earth wire |
| 126 | Supplying and Drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed medium class PVC conduit as required. 3 x 2.5 sq.mm |
| 127 | Supplying and fixing 5 A to 32 A rating, 250 / 415 V, 10 Ka, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. required. Single pole |
| 128 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. required. 40 Amp. |
| 129 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. required. 63 Amp. |
| 130 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess, complete with tinned copper bes bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door |
| 131 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess, complete with tinned copper bes bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, double door |
| 132 | Supplying and fixing Cable End Box (Loose Wire Box) suitable forfollowing single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required. For 8 way, Double door SPN MCBDB |
| 133 | Installation, testing and commissioning of ceiling fan, including wiring of the down rods of standard length (upto 30 cm) with 1.50 sq. mm, FRLS PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc.. as required. |
| 134 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc.. as required. Upto 450 mm sweep. |
| 135 | Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 136 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but modular plate etc. as required. |
| 137 | Electrical Work Market Rate - (Non Scheduled Items) - |
| 138 | S/F of 100 Amp four pole change over switch on 40 mm x 40 mm x 6 mm angle iron frame, including the cost of labour, T&P painting & other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. |
| 139 | Supply & Laying of 25 mm x 3 mm G.I. Strip from earth electrode directly in the ground as required complete in all respect. |
| 140 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000 mm, Outer Dia 50 mm, inner Dia 25, terminal Dia 12 mm, outer G.I. pipe of 16 swg and inner G.I. pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25 mm x 3mm G.I. strip upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. |
| 141 | S/F of 50 Amp. to 63 Amp. SPMCB (10 KA) Cat-B |
| 142 | Supply and fixing of 16 gauge M S drum with louvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects . |
| 143 | Supply and fixing of hexagonal / round G P fan box of approved make made up 1.0 mm thick ISI Marked G.P. sheet spot welded four to Eight holes of 25.40 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.50 mm G P sheet made upper and lower cover duly screwed fitted with 300 mm round zink coted M S bar x 12 mm and brand name should be embossed, fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of work/Fan Hook |
| 144 | Supply and fixing of 36 watt to 46 watt indoor recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink, diffuser of Special Polycarbonate meterial and driver set complete in all respect. Cat-AA |
| 145 | Supply and fixing of LED Tube Light with Metal heavy duty box type batten Light fitting 1 x 22 watt suitable for upto 1 x 22 watt LED Polycarbonate tube light complete including tube suitable for both surface & suspended complete in all respect. Cat AA |
| 146 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 watt. Confirming to IP 66 protection complete in all rescept Cat-AA |
| 147 | S/F of Highbay Light 80 watt with bracket, clamp, chain complete in all respect. |
| 148 | S/F of Fan Downrod, 1.5 mtr. long. |
| 149 | Supply & Fixing of Fan Sheet of Backelite |
| 150 | S/F of LED Bulb 9 watt ISI |
| 151 | Supply & Fixing of light duties exhaust fan 12”dia ISI double ball bearing metalic Usha / Crompton/Bajaj make |
| 152 | S&F of Fire extinguisher, ABC Type 6.00 Kg. capacity (ISI marked IS: 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. |
| 153 | S&F of Co2 type Fire extinguisher, 4.5 Kg. capacity (ISI marked IS: 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. |
| 154 | Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge. |
| 155 | Supply & Fixing of heavy duties exhaust fan 12”dia ISI bearing metalic Usha / Crompton/Bajaj make |
| 156 | Supply & Fixing of exhaust fan luvers 12”dia |
| 157 | S/f of ceiling fan 1200 mm sweep. Single star rated Usha / Crompton/Bajaj mak |
| 158 | S/f of ceiling fan 1400 mm sweep. Single star rated Usha / Crompton/Bajaj mak |
| 159 | S/F of Kit-Kat fuse 200 Amp 02 nos. with neutrail link ,wooden ply board ,Hole fasner with connection |
| 160 | S/F of Wall Fan 16\\" Usha / Crompton/Bajaj make |
| 161 | S/L of Service Cable 10 sq.mm x 2 core with G.I. support wire. |
| 162 | External Connection of Electrification |
| 163 | External Connection of Electrification Please Enable Macros to View BoQ information |
