|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 3 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form form for foundations footing,based of column , etc. for mass concrete. |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 6 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 8 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm |
| 9 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 10 | Modification estimate cost after using correction factor on DSR 2023 on account of GST @ 0.973 |
| 11 | Add Cost index @162% (Area Chiyalekh)(162-107)/107 = 51.40% |
| 12 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 13 | Add Multiplying Factor @ 1.0633 |
| 14 | Add Cost index @162% (Area Chiyalekh)(162-107)/107 = 51.40% |
| 15 | Design, supply, fabrication and fixing of board using words made of acrylic cut out letters with LED and reflective vinyl sheet of commercial gradeas per approved design with following specification.a) Board shall be fabricated with 4 mm thick ACP sheets of approved make. Powder coated Aluminium sheet shall be fixed on both side of the entire boardto make box section.b) letters shall be made of Acrylic cutout letters of approved make and shall be uniformly illuminated by using Digital LED light of approved make.c) Powder coated Aluminum clips and brackets/screws bolts or any fixture shall be used of minimum 4 mm thickness as per direction of Engineer In charge.d) Words of other matter of the board shall be fixed using reflective vinyl cutout letters of approved make. |
| 16 | Providing and fixing brass/copper/SS plate with required words of size 90cm x 60cm of thickness 3 mm with base MS plate of 2mm thick with all necessary fittings. (0.9m x 0.6m =0.54 M) Please Enable Macros to View BoQ information |
