|
| 1 | M&L for minimum 15mm thick wooden battens, 100mm wide fixed each other with male and female grooves, fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantlng, complete all as specified and as directed. |
| 2 | M&L for minimum 15mm thick wooden battens, 100mm wide fixed each other with male and female grooves, fixed with screws to timber frame work as in ceiling, including dismantlng, complete all as specified and as directed. |
| 3 | M&L French polishing on wood or wood based surface of any width or girth or any description,including cleaning and preparing the surface including a coat of wood filler on new surface with two or more coats complete all as specified and as directed. |
| 4 | M&L Solid PVC wall lining consisting of 5mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on PVC Frame with 5mm pvc fillets, including dismantling complete all as specified and directed. |
| 5 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section including Dismantlng .complete all as specified and as directed. |
| 6 | M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section including Dismantlng complete all as specified and as directed. |
| 7 | M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws including Dismantlng complete all as specified and as directed |
| 8 | Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as directed by Engr-in-charge. |
| 9 | S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats , complete all as directed by Engr-in-charge. |
| 10 | S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed. |
| 11 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 12 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 13 | S&F in 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed |
| 14 | S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs all as specified and as directed by Engr-in-charge. |
| 15 | M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and as directed. |
| 16 | S & F in repair One Piece EWC of size 700 x 380 x 770 mm with built in Cistern Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device fixed in repair connection to drain pipe and to flushing pipe antisyphonage pipe etc including PVC fitting P or S trap for 100mm bore of pipe fixed complete all as specified and directed by Engr-in-Charge |
| 17 | S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position completed all as specified and directed. |
| 18 | S & F in repair CP towel ring of dia 200mm fixed with and including screws and wooden/plastic cleats |
| 19 | S & F in repair toilet paper holder with flat recessed type stainless steel fixed with screws complete all as specified and directed by Engr-in charge. |
| 20 | S&F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges |
| 21 | S & F in repairs Vitreous china wash basin white flat back size 550 x 400 mm excluding taps, waste,chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed by Engr-in-Charge. |
| 22 | S & F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe),complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F in repair Vitreous china table top wash basin of size 600 x 385x 195mm snow white incl accessories fixed at position complete all specified and directed by the Engr-in-Charge. |
| 24 | S & F in repair sheet shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long fixed in wall and make good finish complete all as specified and directed |
| 25 | S&F looking mirror in required rectangular shape bevelled edge 5mm thick selected quality glass, mounted on 6mm thick commercial ply, aluminium frame around and fixed to wooden plug with CP brass screws and cup washers Complee all as specified and directed by Engr-in-Charge. |
| 26 | S&F in repairs, 15 mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends complete all as specified and directed. |
| 27 | S&F in repair 15mm bore CP central hole basin mixer without Popup waste system with 450mm long copper pipes chrome finish complete all as specified and as directed. |
| 28 | S & F in repair fancy type ,chromium plated 20 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 29 | S & F in repair fancy type ,chromium plated 20 mm bore angle Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 30 | S & F in repair fancy type 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 31 | S & F rotational moulded HDPE water storage tanks 500 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48 kg/Cum inner and out white two layers ISI marked ( cylindical vertical type/rectangular loft type closed top) hoisted hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store of 500 ltrs capacity complete all as specified and as directed by Engr-in-Charge. |
| 32 | S & F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 33 | M & L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed |
| 34 | M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture including Dismantlng all as specified and directed. |
| 35 | S & F anodised aluminium frame of standerd section for doors, windows, ventilators with double rebates including joining cleat for fixing etc. complete all as specified |
| 36 | M&L for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) (Glass / Wiremesh should be measured seperately)complete all as specified |
| 37 | Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed . |
| 38 | M&L sheet glass 4.8 mm thick ordinalry quality and glazing with wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 39 | M&L sheet glass 3mm thick ordinalry quality and glazing with wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed. |
| 40 | S & F in repairs, 32 mm waste coupling of CP brass for sink and wash hand basin complete all as specified and directed (Half or full threaded ). |
| 41 | S & F in repair CP floor gratings 150mm dia all as directed by the Engr-in-Charge |
| 42 | S & F in repairs 750 mm long, 32/ 40 mm dia., PVC plain Waste pipe for sinks / wash hand basins complete all as specified and directed. |
| 43 | S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge and including taking up or down 25 mm bore steel tubing / PPR pipe and connections and set aside for re-use or removal to store. |
| 44 | S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge and including taking up or down 32 mm bore steel tubing / PPR pipe and connections and set aside for re-use or removal to store. |
| 45 | S&F in repair 32mm outer dia PPR Gate valve confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge. |
| 46 | Demolition of cement concrete (unreiforced) in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed. |
| 47 | M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded crushed stone aggregate as plinth protection finished even and smooth with out using extra cement, complete all as specified and directed. |
| 48 | M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection, complete all as specified and as directed. |
| 49 | Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and as directed |
| 50 | S&F Pre painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and as directed. |
| 51 | S&F Pre painted galvalumealuminium zinc coating GI based Plain steel sheet 0.50mm thick as in ridges , valley gutters drip etc of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified. |
| 52 | M&L for preperation and removal of old Steel / CGI Sheet surface any description over 10cm in width or girth and applaying two coat of synthetic enamal paint all as specified and as directed complete all as specified and as directed. |
| 53 | M&L for Cement concrete type D-2,1:4:8 (40mm graded crushed stone aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings, etc. |
| 54 | M&L for Chequred cement concrete tiles (glazed) 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge. |
| 55 | Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed by Engr-in-Charge. |
| 56 | S&F MS Rolled sections in main and cross beams,hip and jack rafters ;purlins where connected to common rafters running rails and guids for sliding doors ;fixed with angle cleats or other connecting plates and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed. |
| 57 | M&L for preparation new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 58 | Deduct Schedule of Credit of Rs (-) 47912.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information |