|
| 1 | Seam bolts and nuts 6 mm dia and 25 mm long |
| 2 | Fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick |
| 3 | Fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge |
| 4 | Fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge |
| 5 | Fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge |
| 6 | Fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips |
| 7 | Fibre (high impact poly propelene reinforced) cement corrugated apron piece |
| 8 | Fibre (high impact poly propelene reinforced) cement eaves filler piece |
| 9 | Fibre (high impact poly propelene reinforced) cement north light curves |
| 10 | Non-Asbestos fibre (high impact poly propelene reinforced) cement ventilator curves |
| 11 | Fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick |
| 12 | Fibre (high impact poly propelene reinforced) cement ridge finial |
| 13 | Fibre (high impact poly propelene reinforced) cement special north light curves |
| 14 | Fibre (high impact poly propelene reinforced) cement S type louvers |
| 15 | Multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick |
| 16 | Multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick |
| 17 | 6 mm thick heavy duty fiber cement board |
| 18 | 8 mm thick heavy duty fiber cement board |
| 19 | 9 mm thick heavy duty fiber cement board |
| 20 | 12.5 mm thick Gypsum plaster board |
| 21 | 6 mm thick multipurpose cement bonded wood particle board conforming to IS : 14276 |
| 22 | 8 mm thick multipurpose cement bonded wood particle board conforming to IS : 14276 |
| 23 | Brick Aggregate (single size):63 mm nominal size |
| 24 | Brick Aggregate (single size):50 mm nominal size |
| 25 | Brick Aggregate (single size):40 mm nominal size |
| 26 | Stone Aggregate(single size):63 mm nominal size |
| 27 | Stone Aggregate(single size):50 mm nominal size |
| 28 | Stone Aggregate(single size): 40 mm nominal size |
| 29 | Stone Aggregate(single size):25 mm nominal size |
| 30 | Stone Aggregate(single size):20 mm nominal size |
| 31 | Stone Aggregate(single size): 12.5 mm nominal size |
| 32 | Stone Aggregate(single size): 10 mm nominal size |
| 33 | Stone Aggregate(single size): 06 mm nominal size |
| 34 | Safeda ballies 125 mm diameter |
| 35 | Cowdung |
| 36 | Bajiri |
| 37 | Bamboo 25 mm dia 2.5 meter long |
| 38 | Bhusa |
| 39 | Paving bitumen of grade VG 10 of approved quality |
| 40 | Bitumen emulsion |
| 41 | Bitumen grade PMB - 40 |
| 42 | Blown type petroleum bitumen of penetration 85/25 of approved quality |
| 43 | Bitumen hot sealing compound : grade A |
| 44 | Bitumen solution primer of approved quality |
| 45 | Premoulded joing filler 12 mm thick |
| 46 | Bitumen felt fibre base (vegetable or animal): Type 2 grade 1 |
| 47 | Bitumen felt as per IS 7193 Grade II |
| 48 | Bitumen felt : Type 3 grade 1 |
| 49 | Separation Membrane of impermeable plastic sheeting 125 micron thick |
| 50 | Coal Tar |
| 51 | Blasting powder |
| 52 | Blasting fuse (fuse wire) |
| 53 | White face insulating board : 12 mm thick |
| 54 | Natural colour insulating board : 12 mm thick |
| 55 | Flame retardant face insulating board : 12 mm thick |
| 56 | Flame retardant face inslulating, impregnated fibre board 12 mm thick |
| 57 | Flat pressed 3 layer particle board (medium density) Grade 1,12 mm thick |
| 58 | Extra for veneered particle board with : Teak veneering on one side and commercial veneering on other side |
| 59 | Extra for veneered particle board with Commercial veneering on both sides |
| 60 | Extra for veneered particle board with Teak veneering both sides |
| 61 | Curing compound |
| 62 | Integral cystalline slurry |
| 63 | Integral crystalline admixture |
| 64 | Crystalline mortar |
| 65 | Integral cystalline dry shake |
| 66 | Swellable type water stop tape |
| 67 | Primer for swellable type wate stop tape |
| 68 | Polymer modified adhesive mortar |
| 69 | Brick bats |
| 70 | Wire brush |
| 71 | Soft brush |
| 72 | Portland Cement |
| 73 | White cement |
| 74 | Plastic sheath,1.25 mm thick for dowel bars |
| 75 | Coal (steam) |
| 76 | Sealant primer |
| 77 | Cramp Gun metal 25x6x300 mm |
| 78 | Pre moulded joint filler, 25mm thick for expansion joint |
| 79 | Bright finished or black enameled mild steel butt hinges 125x65x2.12 mm |
| 80 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 81 | Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm |
| 82 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 83 | Nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide |
| 84 | Bright finished or black enameled mild steel screws 40 mm |
| 85 | Bright finished or black enameled mild steel screws 20 mm |
| 86 | Decorative type Louvers (upto 0.20 sqm) in Block board construction flush door |
| 87 | Rebate cutting in Block board construction flush door |
| 88 | Decorative plywood 4 mm |
| 89 | Fuel wood |
| 90 | Calcium silicate base compound for jointing calcium silicate tiles |
| 91 | Hessian cloth |
| 92 | Cement Concrete Jali 50 mm thick |
| 93 | Cement Concrete Jali 40 mm thick |
| 94 | Cement Concrete Jali 25 mm thick |
| 95 | Kerosene oil |
| 96 | Unslaked lime |
| 97 | Deharadun white lime |
| 98 | Dry hydrated lime (factory made) |
| 99 | Marble dust/ powder |
| 100 | Marble chips up to 4 mm and downsize white &black |
| 101 | Silicon and acrylic emulsion |
| 102 | Acrylic distemper Ist quality, having VOC content less than 50 gm/litre |
| 103 | Acrylic emulsion, having VOC content less than 50 gm/litre |
| 104 | Premium acrylic emulsion of interior grade, having VOC content less than 50 gm/litre |
| 105 | Ready mixed pink or grey primer on wood work(hard and softwood) having VOC content less than 50 gms/litre |
| 106 | Ready mixed red oxide zinc chromatic on steel/ iron work, having VOC content less than 250 gms/litre |
| 107 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 108 | Exterior primer |
| 109 | Moorum |
| 110 | Mud (dry) |
| 111 | Dry distemper |
| 112 | Oil bound washable distemper/ Acrylic distemper |
| 113 | Linseed oil (double boiled) |
| 114 | Cement Primer |
| 115 | Distemper primer |
| 116 | Pink primer (for wood) |
| 117 | White cement based putty |
| 118 | Aluminium paint |
| 119 | Acid proof paint (chocolate or black) |
| 120 | Anticorrosive bituminous paint (black) |
| 121 | Black Japan |
| 122 | Enamel paint |
| 123 | Floor enamel paint in all shades except green |
| 124 | Synthetic enamel paint in black or chocolate shade |
| 125 | Synthetic enamel paint in all shades except black or chocolate shade |
| 126 | Plastic emulsion paint |
| 127 | Roofing paint for iron sheets in red colour |
| 128 | White lead |
| 129 | water proofing cement paint |
| 130 | Wax polish (ready made) |
| 131 | Ordinary varnish |
| 132 | Superior copal varnish |
| 133 | Superior spar varnish |
| 134 | Oil type wood preservative |
| 135 | Putty for wood work |
| 136 | pig lead |
| 137 | Premixed super white gypsum plaster |
| 138 | Plaster or paris |
| 139 | Copper pins 6 mm dia 7.5 cm long |
| 140 | Black colour dark shade pigment |
| 141 | Red chocolate, orange, buff or yellow (red oxide of iron) light shade |
| 142 | Green or blue medium shade pigment |
| 143 | Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia |
| 144 | Royalty for good earth |
| 145 | Coarse sand (zone III) |
| 146 | Fine sand (zone IV) |
| 147 | Galvanised steel plain sheets |
| 148 | Standard quality hard board sheet 3 mm thick |
| 149 | Standard quality hard board sheet 4.5 mm thick |
| 150 | Mild steel round bar 12 mm dia and below |
| 151 | Mild Steel round bar above 12 mm dia |
| 152 | Average rate of mild steel round bars for reinforcements |
| 153 | Twisted steel/deformed bars |
| 154 | Mild steel square bars |
| 155 | Structural steel such as tees, angles, channels andR.S. joists |
| 156 | Flats up to 10 mm in thickness |
| 157 | Flats exceeding 10 mm in thickness |
| 158 | Mild steel plates |
| 159 | Steel glazed door, window/ ventilator, all members viz, F7D, F4B, K11 and K12B etc. |
| 160 | Mild steel rivets |
| 161 | Hard drawn steel wire fabric |
| 162 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
| 163 | Galvanised steel J or L hooks 8 mm dia |
| 164 | Galvanished steel bolts & nuts 10 mm dia and 125 mm long round head with slots |
| 165 | Mild steel bolts 6 mm dia and 25 mm long with hexagonal head |
| 166 | Straining bolts |
| 167 | Galvanished steel barbed wire |
| 168 | Galvanised steel turn buckles |
| 169 | Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts |
| 170 | Galvanised steel bolts 10 mm dia and 7 cm long with nuts |
| 171 | Bolts and nuts up to 300 mm in length |
| 172 | Bolts and nuts above 300 mm in length |
| 173 | Iron pintels including weldded pin |
| 174 | Boundary stone top chisel dressed 15X15X90 cm |
| 175 | Through and bond stone size 24 x 24 x 39cm |
| 176 | Stone for masonry work |
| 177 | Stone for pitching 15 cm x 22.5 cm |
| 178 | Stone dust |
| 179 | Kota stone slab 20 mm to 25 mm thick (semi-polished) |
| 180 | White sand stone slab 45 mm to 50 mm thick (un-dressed) |
| 181 | Stone grit 6 mm and down size or pea sized gravel |
| 182 | Crushed stone 2.36 mm to 12.5 mm size |
| 183 | Surkhi |
| 184 | Second class deodar wood in planks |
| 185 | First class kail wood in planks |
| 186 | Second class kail wood in scantling |
| 187 | Second class kail wood in planks |
| 188 | Sal wood in scantling |
| 189 | Precast terrazzo tiles 22 mm thick (light shade) |
| 190 | Precast terrazzo tiles 22 mm thick (medium shade) |
| 191 | Precast terrazzo tiles 22 mm thick (dark shade) |
| 192 | Precast heat resistant terrance tiles (size 300x300 mm) and 20 mm thick |
| 193 | G.I Limpet washer |
| 194 | Bitumen washer |
| 195 | G.I. Plain washer thick |
| 196 | G.I. Plain washer thin |
| 197 | G.I. Plain washer for seam bolts |
| 198 | Water proofing materials |
| 199 | Welding by gas plant |
| 200 | Welding by electric plant |
| 201 | Whiting |
| 202 | Wire nails |
| 203 | Wire mesh (rabbit) |
| 204 | 20 mm dia holding down bolts |
| 205 | Mild steel sheets with bolts and nuts to rest on pintels |
| 206 | Hard drawn steel wire |
| 207 | Mild steel flat strap fitting |
| 208 | Chequered terrazzo tiles 22 mm thick (light shade) |
| 209 | Chequered terrazzo tiles 22 mm thick (medium shade) |
| 210 | Chequered terrazzo tiles 22 mm thick (dark shade) |
| 211 | Extra for selected planks of second class teakwood |
| 212 | Diesel oil |
| 213 | Bleaching powder |
| 214 | Common burnt clay F.P.S. (non modular) bricks tile class designation 10 |
| 215 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 216 | Float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 Kg/ sqm) |
| 217 | Play wood 5 play with commericila ply on both faces 6 mm thick |
| 218 | 12 mm commercial ply |
| 219 | 18 mm thick block board with commercial ply veneering on both side |
| 220 | 21 mm thick clear toughened Laminated glass for fins with holes |
| 221 | Common burnt clay F.P.S. (non modular) bricks class designation 7.5 |
| 222 | Stone Aggregate (single size) : 80 mm nominal size |
| 223 | Stone chippings/ screenings 4.75 mm nominla size |
| 224 | Stone chippings/ screenings 150 micron nominal size |
| 225 | Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size |
| 226 | Stone chippings/screenings 12.5/13.2 mm nominal size |
| 227 | Stone Chippings/ screenings 10/ 11.2 mm nominal size |
| 228 | Solvent |
| 229 | Galvanised steel corrugated sheets |
| 230 | Mild steel tubes hot finished welded type |
| 231 | Mild steel tubes hot finished seamless type |
| 232 | Aluminium primer |
| 233 | Red oxide Zinc chromate primer |
| 234 | Copper acetate |
| 235 | Mobil oil |
| 236 | Galvanised wire mesh of average width of aperture1.4 and nominal dia. of wire 0.63 mm |
| 237 | Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement |
| 238 | Epoxy paint |
| 239 | Granite of any colour, 18 mm thick (slab area upto 0.50 sqm) |
| 240 | Granite of any colour, 18 mm thick (slab area above 0.50 sqm) |
| 241 | wall form panel 1250x500 mm |
| 242 | Tie bolt 12 mm dia 100 mm length |
| 243 | Tie bolt 12 mm dia 150 mm length |
| 244 | Tie bolt 20 mm dia 150 mm length |
| 245 | Tile bolt 20 mm dia 225 mm length |
| 246 | Spring coil 12 mm |
| 247 | Plastic cone 12 mm dia |
| 248 | Corner angle 45x45x5 mm 1.50 m long |
| 249 | 100 mm channel shoulder 2.5 m long |
| 250 | Double clip (bridge clip) |
| 251 | Single clip |
| 252 | M.S. Tube 40 mm dia |
| 253 | Wall form panel 1250x450xmm |
| 254 | Corner angle 45x45x5 mm 2.50 long |
| 255 | Column clamp 450x1070 mm |
| 256 | Prop 2 m (2-3.5m) |
| 257 | Binding wire |
| 258 | Adjustable span ESO+SI (2.35-3.40) |
| 259 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 260 | Beam clamp 300-380 mm (450-1070 mm) |
| 261 | Prop 4 m |
| 262 | Double coupler |
| 263 | Glass sheet (pin headed ) 4 mm thick |
| 264 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 265 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 266 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc. |
| 267 | Rectified - Ceramic Glazed Tiles Ist quality 300 x 300 mm or more in all shades designs White, Ivory, Grey, Fume Red Brown etc |
| 268 | Rectified - Ceramic Glazed Tiles Ist quality 300 x 300 mm or more in all shades designs except White, Ivory, Grey, Fume Red Brown etc |
| 269 | Vitrified floor tile 50x50 cm |
| 270 | Vitrified floor tile 60x60 cm |
| 271 | Vitrifies floor tile 80x80 cm |
| 272 | Interlocking C.C. paver block (60 mm thick, M-30) |
| 273 | Sundries Please Enable Macros to View BoQ information |
