|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm. |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:4:8 or leaner mix (i/c equivalent design mix). |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 4 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 5 | Providing and fixing PVC Panelling in wall 5 to 10 mm thick including all fitting and fixture complete (Hall affairs or any equivalent make) |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 7 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) : 32 mm dia. Nominal bore. |
| 8 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) : 32 mm nominal bore |
| 9 | Providing and fixing G.I. Elbow in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) : 32 mm nominal bore |
| 10 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931. |
| 11 | Providing and fixing PVC Connection pipe. |
| 12 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, indicating the BIS license number with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintax, Electroplastic, star, lotus or equivalent having ISI license). |
| 13 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. : 125 mm |
| 14 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm |
| 15 | Providing and fixing Soap Dish holder Superior Quality. |
| 16 | Providing and fixing CP towel rod 600mm long ( 20mm dia) superior quality. |
| 17 | Providing and fixing CP Towel ring 200mm dia. Superior quality. |
| 18 | Providing and fixing PVC Water Tank Cover |
| 19 | Supplying Acid bottle 750ML |
| 20 | Supplying Drainer 40gm pouch |
| 21 | Supplying Harpic |
| 22 | Supplying Roundup Chemical |
| 23 | Supplying Detol Hand Wash 200ml |
| 24 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 25 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 26 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :470x360 mm bowl depth 220 mm. |
| 27 | CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 28 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown. |
| 29 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : (Area of slab over 0.5 sqm). |
| 30 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White |
| 31 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm. |
| 32 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand). |
| 33 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 34 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 35 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 36 | Suspended floors, roofs, landings, balconies and access platforms. |
| 37 | Foundations, footings, bases of columns etc. for mass concrete. |
| 38 | Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete. |
| 39 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. : 25mm thick with 12.5 mm nominal size stone aggregate. |
| 40 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase. |
| 41 | 12mm Cement plaster of mix : 1 : 4 ( 1 cement : 4 fine sand). |
| 42 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 43 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 44 | Providing and applying two coats of water proofing compound (Dr Fixit URP 301 or equivalent) of approved quality/ brand on walls including cleaning and preparation of surface as per the direction of Engineer-in-charge. |
| 45 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 46 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick. |
| 47 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete : 2 mm thick. |
| 48 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm). |
| 49 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.). |
| 50 | For fixed portion : Powder coated aluminum (minimum thickness of powder coated 50 microns). |
| 51 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) : Powder coated aluminum (minimum thickness of powder coated 50 microns) . |
| 52 | Lettering with black Japan paint of apporved brand and manufature |
| 53 | Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 54 | Providing and fixing ACP Sheet 4.0 mm thick. |
| 55 | Providing and fixing Ply wood 10 mm thick. |
| 56 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm |
| 57 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm |
| 58 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc.complete: 150x10 mm |
| 59 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. : 75 mm |
| 60 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. : 125 mm |
| 61 | Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x63x3.2 mm. |
| 62 | Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. : 100x58x1.90 mm |
| 63 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.90 mm. |
| 64 | Providing and Fixing M.S Eye-Hook for window shutters. |
| 65 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.0 mm thick glass panes |
| 66 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with by way of welding with MS Members.Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both Sides. |
| 67 | Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete : |
| 68 | Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles for aluminium doors including necessary cutting and making good etc. complete. |
| 69 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. |
| 70 | 250x16 mm |
| 71 | 300x10 mm |
| 72 | 150x10 mm |
| 73 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : |
| 74 | 200x12 mm |
| 75 | 175x12mm |
| 76 | 125x12mm |
| 77 | Providing and fixing 4mm thick 710 grade ply wood. |
| 78 | Carriage of Aggregate below 40mm Nominal size for an avreage distance of 10 km including 50 m avg. by head load. |
| 79 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item.) : With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm). |
| 80 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. : Single Socketed pipes : 110 mm diametre. |
| 81 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. : Single socketed pipes : 75 mm diametre. |
| 82 | Providing and fixing PVC Pipe-150mm diameter. |
| 83 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. |
| 84 | Bend 87.5° : 110 mm bend |
| 85 | Bend 87.5° : 75 mm bend |
| 86 | Single TEE : 110x110x110 mm |
| 87 | Finishing walls with Acrylic smooth exterior paint of required shade:Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) |
| 88 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below |
| 89 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead : With cement mortar 1:4 (1 cement : 4 fine sand). |
| 90 | Engaging Labour for Shifting and covering of Furniture/Furnishing items before repairing/facelifting works and keeping back in same condition after completion of work. |
| 91 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second Class deodar wood. |
| 92 | Providing and Fixing SS Handles-150mm |
| 93 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. |
| 94 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. : 20mm nominal outer dia pipes. |
| 95 | External work : exposed on wall, including fixing the pipe with clamps appropriate spacing : 32mm Nominal outer dia pipes. |
| 96 | Providing and fixing Plastic Man-Hole Cover-10\\"x10\\". |
| 97 | Engaged Aluminium fitter for repairing of Aluminium doors and windows etc. including cost of minor hardware materials like screws etc. |
| 98 | Providing and fixing carbon steel galvanized (minimum coating 5 micron)dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2) counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete masonry etc. as per direction of Engineer-in-charge. : 10x80 mm. |
| 99 | Providing and fixing UV PVC Sheet Wall panelling of approved design and quality including necessary adhesive (of fevicol brand or equivalent) screws,nuts etc. all complete including wastage etc. : UV PVC (polyvinyl chloride) Marble sheets designed to mimic the appearance of natural marble. Manufactured by UV-cured printing process to create high-resolution marble patterns and textures on the surface of PVC sheets-3 MM thick (Heavy Duty) including Golden strips and golden nails as per requirement and as per the design approved by engineer-in-charge. |
| 100 | Providing and fixing of 12mm WPC board(high density) on walls over 18mm thick WPC Framing with necessary screws complete job. Of appeoved brand and manufacture by EIC. |
| 101 | Providing and fixing Charcoal louvers Panels -10 mm thick of superior quality approved by engineer-in-chatrge for wall panelling made from a mixture of Charcoal and polystyrene proportionately including necessary screws,nuts all complete including wastage etc. |
| 102 | Providing and fixing of charcoal sheet(4 mm ) thick including TEE Profile with necessary arrangements of approved brand and manufacture by EIC |
| 103 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded. |
| 104 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 105 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Please Enable Macros to View BoQ information |
