|
| 1 | Providing and fixing powder-coated aluminium partition made out of approved section of minimum 1.2 mm thick extruded aluminium frame with necessary verticals, horizontals, cleats, brackets, holdfasts, screws and fixing arrangements complete. The partition shall be fitted with 5 mm thick clear glass and solid portions shall be finished with pre-laminated MDF board of approved shade and design. All exposed edges shall be machine-finished and properly sealed. The work shall include necessary hardware, beading, rubber gasket, sealant and all accessories complete as directed by the Engineer-in-Charge. |
| 2 | Providing and fixing decorative PVC wall cladding of approved quality and wooden finish over existing wall surface using suitable aluminium/wooden framework, adhesive and mechanical fasteners complete. The PVC panels shall be moisture resistant, termite resistant and of approved colour, texture and pattern. The work shall include necessary corner trims, edge mouldings, finishing accessories and proper alignment complete as directed |
| 3 | Providing and fixing heavy-duty commercial grade vinyl flooring of approved make and shade over properly prepared smooth base surface complete. The vinyl flooring shall be anti-skid, wear resistant and suitable for office use. The work shall include surface preparation, application of approved adhesive, cutting, laying, jointing and finishing complete in all respects as per manufacturer’s specification and direction of Engineer-in-Charge |
| 4 | Providing and fixing decorative PVC false ceiling made of approved quality PVC panels with necessary GI/ aluminium framework suspended from roof slab using suitable hangers, anchor fasteners and accessories complete. The ceiling shall include perimeter channels, intermediate members, joint trims and finishing accessories. The work shall be completed in proper line and level including cut-outs for electrical fixtures, fans and AC points as required |
| 5 | Supplying, installation, testing and commissioning of wall-mounted split type air conditioner of 1.5 Ton capacity, 3-Star rating, inverter technology of Daikin or equivalent approved make complete with indoor and outdoor unit, copper refrigerant piping, interconnecting cable, drain pipe, stabilizer, mounting arrangement and all accessories required for proper functioning. The work shall include vacuuming, gas charging if required, testing and commissioning complete |
| 6 | Supplying, installation, testing and commissioning of wall-mounted split type air conditioner of 1.0 Ton capacity, 3-Star rating, inverter technology of Daikin or equivalent approved make complete with indoor and outdoor unit, copper refrigerant piping, interconnecting cable, drain pipe, stabilizer, mounting arrangement and all accessories required for proper functioning complete. |
| 7 | Storage (Mini Almirah) – Size: 16 ft x 2 ft: Providing and placing storage cabinet/mini almirah made of pre-laminated MDF board of approved shade and texture with necessary partitions, shutters, shelves and backing. The work shall include edge banding, stainless steel handles, telescopic channels, hinges, locks, magnetic catcher and all hardware complete. All exposed surfaces shall be properly finished and aligned as per approved design and direction of Engineer-in-Charge. |
| 8 | Work Station at Civil Branch in 2nd Floor (7.5 ft x 2 ft): Providing and fixing modular workstation made of pre-laminated MDF board with necessary table top, vertical partitions, keyboard tray, cable management arrangement, modesty panel and storage unit complete. The workstation shall include edge banding, necessary hardware fittings, supports and accessories complete as per approved layout. |
| 9 | Table (2nd Floor Civil Cabin for SPE) – Size: 1.2 m x 0.75 m: Providing and placing office table made of pre-laminated MDF board with necessary side panels, drawers, storage arrangement and modesty panel complete. The work shall include edge banding, telescopic channels, locks, handles and all necessary fittings and fixtures complete. |
| 10 | Revolving Chair for Civil Branch: Supplying and placing high-back revolving office chair with cushioned seat and back, hydraulic height adjustment mechanism, push-back arrangement, arm rest and heavy-duty nylon/metal base with castor wheels complete. The chair shall be upholstered with good quality fabric/synthetic leather and suitable for office use. |
| 11 | Storage (mini almirah)-size: 16'' x 2ft: Providing and placing storage cabinet made of pre-laminated MDF board with shelves, shutters, edge banding, handles, hinges, locking arrangement and all accessories complete as directed. |
| 12 | Providing and fixing approved quality toughened glass of required thickness in partition, door or other locations with necessary aluminium channels, fittings, patch fittings, handles, locking arrangement, rubber gasket, sealant and all accessories complete as directed by the Engineer-in-Charge. |
| 13 | Providing and fixing roller type sun blind/window blind made of approved quality fabric with operating mechanism, brackets, roller arrangement and all accessories complete. The blinds shall be of approved colour and suitable for office interiors. |
| 14 | Providing and applying interior acrylic emulsion paint of approved brand and shade over prepared surface including scraping, sand papering, putty application, primer coat and minimum two coats of paint complete. The surface shall be properly finished in uniform shade and texture as directed. |
| 15 | Dismantling existing partition, ceiling, flooring, doors, windows, electrical fixtures or any other defective/unserviceable components carefully without damaging adjoining structures including removal of debris, stacking of serviceable materials and disposal of unserviceable materials outside the premises complete. |
| 16 | Repairing and renovation of toilet including replacement of damaged sanitary fittings, GI/PVC pipelines, taps, valves and connected accessories complete. The work shall also include boring/water supply related minor works and supplying, fitting and fixing of water pump/motor of approved capacity and make including all electrical and plumbing connections complete. |
| 17 | Repairing and reconditioning of existing sofa including replacement of damaged foam, rexine/fabric upholstery, polishing, stitching, strengthening of frame and all incidental works complete for satisfactory use. |
| 18 | Sweeper works: Cleaning of construction debris, removal of waste materials, sweeping, disposal and housekeeping works during and after execution of works complete for maintaining proper site condition. |
| 19 | Granite works: Providing and fixing approved quality polished granite stone slab of required thickness in flooring, counter, sill, skirting or other locations over cement mortar bed complete. The work shall include cutting, polishing, edge finishing, joint filling and proper alignment complete. |
| 20 | CCTV camera & LAN works: Supplying, installation, testing and commissioning of CCTV cameras and LAN networking system complete with wiring, conduits, CAT-6 cable, switches, connectors, accessories and allied works as required. The CCTV system shall include suitable indoor/outdoor cameras, mounting arrangement, recording and networking accessories complete. The work shall include proper testing and commissioning. |
| 21 | Steel almirah: Supplying and placing steel almirah made of CRCA steel sheet with powder-coated finish, shelves, locking arrangement, handles and all standard accessories complete. The almirah shall be of robust construction suitable for office use. |
| 22 | Sanitary works in civil branch: Providing sanitary and plumbing works including supplying and fixing sanitary fixtures, CP fittings, pipelines, valves, traps, accessories and all allied plumbing works complete. The work shall include testing of pipelines and fixtures for proper functioning. |
| 23 | Roofing sheet: Providing and fixing 0.45 mm thick colour-coated profile roofing sheet of approved make over existing steel/roof framework with self-drilling/self-tapping screws, bitumen washer, ridge pieces, flashing and all accessories complete. The roofing sheets shall be properly lapped and fixed to withstand weather conditions. |
| 24 | Providing and applying interior/exterior paint work including surface preparation, scraping, putty, primer and finishing coats using approved quality paint complete as directed by Engineer-in-Charge. |
| 25 | Balance work of 8 passenger lift at old building of SSA, Assam: Executing balance finishing works related to installation of 8-passenger lift at old building including ceiling work, wall panelling, electrical works, finishing works, touch-up repairs, allied civil works and all incidental items required for completion and functional integration of lift area complete as directed. |
| 26 | Work station at 4th floor for world bank team (size - 1.2ft x 2.1ft): Providing and fixing modular workstation made of pre-laminated MDF board with table top, side partitions, cable management arrangement, storage provision and all necessary fittings and fixtures complete as per approved layout. |
| 27 | Table (4th floor WB- cabins)-size: 1.2m x 0.75m: Providing and placing office table made of pre-laminated MDF board with drawers, modesty panel, storage arrangement, edge banding and necessary fittings complete. |
| 28 | Revolving chair for world bank team: Supplying and placing revolving office chair with cushioned seat and back, hydraulic mechanism, arm rest, revolving system and castor wheel base complete suitable for office use. |
| 29 | Conference Table for World Bank Team (Size: 2.84 m x 1.2 m): Providing and placing conference table made of pre-laminated MDF board with suitable top, base support, cable management provision and necessary fittings complete. All exposed edges shall be edge-banded and properly finished. |
| 30 | Storage (mini almirah)-size: 0.9m x 0.4m: Providing and placing compact storage cabinet made of pre-laminated MDF board with shelves, shutters, locking arrangement, handles and all hardware fittings complete. |
| 31 | Plastic film on partition wall/ doors etc.: Providing and fixing decorative/self-adhesive plastic film of approved shade and design on partition walls, doors, glass or other surfaces including surface cleaning, preparation, trimming and finishing complete. |
| 32 | Sun blind for window: Providing and fixing roller type window blind made of approved fabric with complete operating mechanism, brackets and accessories suitable for office use. |
| 33 | Stainless steel cabinet: Providing and placing stainless steel cabinet made of SS 202/SS 304 grade stainless steel sheet with shelves, shutters, handles, locking arrangement and all accessories complete. All edges shall be properly folded and finished. |
| 34 | Providing wiring for light point using FRLS copper conductor wire of suitable size in PVC conduit/casing-capping complete with switch, switch box, plate, connectors and all accessories. The work shall include connection, testing and commissioning complete. |
| 35 | Providing and fixing power plug points with suitable modular switch, socket outlet, box, plate, FRLS copper wiring and PVC conduit complete including all accessories and connection for satisfactory operation |
| 36 | Providing sub-main wiring using suitable size FRLS copper conductor wire/cable in PVC conduit including saddles, clamps, accessories and connections complete as required for power distribution. |
| 37 | Supplying, installation, testing and commissioning of ceiling fan of approved make and sweep complete with down rod, canopy, blades, regulator, wiring connection and all accessories required for satisfactory operation. Please Enable Macros to View BoQ information |
