|
| 1 | Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 2 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement |
| 3 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m |
| 4 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. |
| 5 | Supply and fixing of AC Ceiling Fan complete 1200 mm (48\\") Sweep with 300mm Down Rod with Regulator including fixing cost and all other cost and conveyance etc complete |
| 6 | supply and fixing of 18w LED light Ftiing with ELECTRICAL LAMPS, FITTINGSAND CONNECTED ACCESSORIES.M-1211 |
| 7 | Supplying and fixing in position of Alu. Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90 cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12 mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips.rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill ti the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the Aluminium sections should be anodised to 1.5microns as per ISI specification 1868/1962. |
| 8 | supply and fixing CCTV camer in 4MP including erection charges and coveyance charges etc completed…,M-2806 |
| 9 | supply and fixinge Exhaust fan including erection charges and coveyance charges etc completed…,M-1341 |
| 10 | supply and delivery of silver bucket including all other cost and conveyance etc complete…(rate taken by quotation) |
| 11 | supply and delivery of 10kg vessel (10 pidi rice andaa) including all other cost and conveyance etc complete…(rate taken by quotation) |
| 12 | supply and delivery of drinking water jug(2 litre) including all other cost and conveyance etc complete… (rate taken by quotation) |
| 13 | supply and delivery of tumbler including all other cost and conveyance etc complete…(rate taken by quotation) |
| 14 | supply and delivery of plate (11 inch) including all other cost and conveyance etc complete…(rate taken by quotation) |
| 15 | supply and delivery of silver drum including all other cost and conveyance etc complete…(rate taken by quotation) |
| 16 | supply and delivery of ladle (rice serving spoon) including all other cost and conveyance etc complete…(rate taken by quotation) |
| 17 | supply and delivery of standing dining table including all other cost and conveyance etc complete…(rate taken by quotation) |
| 18 | supply and delivery of plastic chair including all other cost and conveyance etc complete…(rate taken by quotation) |
| 19 | supply and delivery of fridge including all other cost and conveyance etc complete…(rate taken by quotation) |
| 20 | supply and delivery of name board including all other cost and conveyance etc complete…(rate taken by quotation) Please Enable Macros to View BoQ information |
