|
| 1 | (B/R PORTION)Excavation in trenches not exc 1.5 metre width and not exceeding 1.5 metre in depth in hard and dense soil and getting out complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed. |
| 3 | Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed. |
| 4 | M&L hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and cm thick, watered and rammed to a true surface of broken stones complete all as specified and directed. |
| 5 | M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed. |
| 6 | Form work Use and waste to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical or to batter of fair finished surfaces complete all as specified and directed. |
| 7 | Form Work Use and waste to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surfaces complete all as specified and directed. |
| 8 | Form Work Use and waste of to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and directed. |
| 9 | M&L for 40 mm thick DPC to horizontal or vertical surfaces incl necessary formwork in cement concrete 1:2:4, type B-0 all as specified and directed. |
| 10 | M&L for RCC (nominal mix ) type B1 1:2:4 (20 mm graded aggregate) in foundations, including rafts, footings, foundation beams ; plinth beams; bases for columns, etc ; basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 11 | M&L for RCC (nominal mix ) type B1 1:2:4 (20 mm graded aggregate) in Roof Beams, cantilevers, bressummer, lintels over 1.5 span complete all as specified and directed. |
| 12 | M & L for precast reinfoced concrete (1:2:4) type B1 using 20mm graded stone aggregate as in cover slab or of manholes & position & set in cement mortar 1:4. all as specified and directed. |
| 13 | S&F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed. |
| 14 | S&F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed. |
| 15 | M&L brick work with Fly ash bricks old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 16 | M&L brick work with Fly ash bricks' old size brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed. |
| 17 | M & L 100 mm thick PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed. |
| 18 | M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair face of brick work or concrete surface on external surfaces in CM (1:4) & water proofing compound mixed with second layer @ 250 ml/Bag or as per manufaturer instruction finished fair and even. complete all as specified and directed. ( Note -W.P.C. shall be measured and paid separetly . ) |
| 19 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished rendering surfaces even and smooth (without using extra cement) complete as specified and directed. |
| 20 | S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250) quality-A complete all as specified and directed. |
| 21 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 22 | M & L applying two coats of synthetic enamel paint on steel surfaces of any description/new over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed. |
| 23 | S & F 10 to 12 mm thick gypsum board false ceiling any raised moulding to flat ornamental including 0.55 mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mm with web of 27mm, fixed to surrounding wall using nylon sleeves and screws @ 450mm centre to centre / GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspended from the soffit of roof slab/ truss @1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fasteners with and including ceiling section ( not exc 1.2 metre length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 25 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel @ 457 mm centre to centre with necessary nuts and bolts and gypsum board scrrewed to ceiling section with stainless steel screws @ 230mm c/c including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces complete all as specified and directed. |
| 24 | M&L Virified ceramic joint free colour tiles area of each tile exc 0.42 Sqm but n exc exc 1.0 Sqm and 9 to 10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 15 mm thick screed bed cement mortar 1:6 complete all as specified and directed. all as specified and directed . |
| 25 | M&L Virified ceramic joint free colour tiles for Verticle surface of area of each tile exc 0.42 Sqm but n exc exc 1.0 Sqm and 9 to 10 mm thick, in as skirting/dado etc, set and jointed in neat cement slurry and pointed in coloured cement complete including 10 mm thick screed bed cement mortar 1:3 complete all as specified and directed. all as specified and directed . |
| 26 | M&L For RCC 1:2:4 type B1 20 mm graded as in chajja,slab supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like all as specified and directed. |
| 27 | M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1 to 2mm thick water proof wall care putty complete all as specified and directed. |
| 28 | M&L for preparation of new wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1 to 2mm thick water proof wall care putty complete all as directed. |
| 29 | M&L for preparation of new Ceiling surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1 to 2mm thick water proof wall care putty complete all as directed . |
| 30 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on new surfaces complete all as specified and directed. |
| 31 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed . |
| 32 | M & L 25 mm thick PCC 1:2:4 type B-1 using 12.5 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth using without extra cement complete all as specified and directed. |
| 33 | M & L 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in sub base of floor complete all as specified and directed. |
| 34 | M & L Pre-polished chequred cement concrete tile (Colured) 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 35 | M & L for 20 mm thick screed bed or bedding layer of mortar as in backing coat of stone on fair face of brick wall or concrete surface in cement mortar 1:4 complete all as specified and directed. |
| 36 | M & L 18 to 20 mm thick machine cut one side polished natural hard stone (Granite)any type in step, jambs, pillars,window cills, cooking plate from and simalr places etc like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 37 | S&F in repair 6mm thick bevelled edge mirror of size as required fixed on 6mm thick acrylic sheet board backing, fixed with chromium plated screws and cup washer complete all as specified and directed. |
| 38 | S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed |
| 39 | S&F 1000 Liter Capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed |
| 40 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore as directed |
| 41 | S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed |
| 42 | S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed |
| 43 | S&F in repair 100mm CI bends any radius complete all as specified and directed |
| 44 | S&F in repair 100mm CI 'T' any radius complete all as specified and directed |
| 45 | S&F 100 mm bore Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 46 | S&F 100 mm bore Cast iron nhani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed. |
| 47 | S & F PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed. |
| 48 | S & F PVC connection 15 mm dia 600 mm long with brass fly nut at both ends complete all as specified and directed. |
| 49 | S&F in repair chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.(MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE,or equivalent make specified in tender. |
| 50 | Supply and fix vitreous china wash basin, white, counter top, size 530 x 420 x140 mm rectangular shape excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed .(Make : Jaquar Cat No-JDS-WHM-25907N ,Parryware or equivalent make specified in tender. |
| 51 | S&F chromium plated Single lever tall body faucet for wash basin Pillar cock in chrome finish complete all as specified and directed.(MAKE : JAQUAR, Cat No :DRC-37005B/ PARRYWARE or equivalent make specified in tender. |
| 52 | S&F chromium plated Bottel trape 32 mm with 250 mm & 190 mm long wall connection pipe &wall flange in chrome finish complete all as specified and directed.(MAKE : JAQUAR, Cat No :ALD-769L250x190/ PARRYWARE,or equivalent make specified in tender. |
| 53 | S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed.(Make : JAQUAR, Cat No: KUP-35053PM or equivalent make specified in tender. |
| 54 | S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed.(Make :JAQUAR, Cat No: ARI-39041/ or equivalent make specified in tender. |
| 55 | S&F Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make :Cat No-JAQUAR, Cat No: ACN-1121BN / or equivalent make specified in tender. |
| 56 | S&F toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N or equivalent make specified in tender. |
| 57 | S&F in repair Chromium plated brass Auto closing concealed Urinal flush valve with wall flange fancy type fixed to 15 mm bore of Iron pipe complete all as specified and directed.(Make : JAQUAR, Cat No: PRS-073 or equivalent make specified in tender. |
| 58 | S&F Urinal with complete kit and accessories(Waste Pipe,Spreader etc) Siutable for Urinal URS-WHT-13255 chrome finish complete all as specified and directed.(MAKE : JAQUAR, Cat No :URS-WHT-13253N/ PARRYWARE,or equivalent make specified in tender. |
| 59 | S&F Urinal Partitions frosted curvede shape glass wall size 900x450x8-10 mm thick Siutable for Urinal URS-WHT-13255 finish complete all as specified and directed.(MAKE : JAQUAR, Cat No :1810-UC/1110UC/ PARRYWARE,or equivalent make specified in tender. |
| 60 | S&F vitreous china floor/wall mounted coupled closet (Pedestal pattern) white including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings including taking down existing water closet complete all as specified and directed.Make-JAQUAR Cat No-10753NS250UFSM or equivalent make specified in tender. |
| 61 | S&F corner glass shelf 200 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102) or equivalent make specified in tender. |
| 62 | S&F Soap dispenser with glass bottle complete all as specified and directed. (Make: JAQUAR, Cat No: AKP-35735P )or equivalent make specified in tender. |
| 63 | S&F Single towel rail 600 mm long complete all as specified and directed. (Make: JAQUAR, Cat No: AKP-35711PS ) or equivalent make specified in tender. |
| 64 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 65 | S&F, Powder coated aluminium Three Track sliding window with shutter styles 40mm x20 mm sheet thickness 1.5mm Two shutter of glass and one shutter of wire mesh consisiting of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100mm x 44mm x 1.5mm thick section with or without rebate 5 mm thick tinted glass fixed with aluminium beads locking arrangement with each shutter all as directed by the Engineer-in-Charge.Note: 1) Size of window shall be as per site requirement. 2) Glass and wire cloth shall be inclusive in this Rate. |
| 66 | S & F powder coating of any colour (Thickness or powder coating not less than 50 micron). Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified Note: 1) Size of window shall be as per site requirement. 2) Glass and ACP Boars shall be inclusive in this Rate. |
| 67 | S&F Mono block water pressure pump set of capacity 0.50 HP single phase , discharge range 36-60 Lpm , working in voltage range 220-240 V with operating pressure range 1.4 -2.4 (Bar) complete including with closed discharge valve and connected fittings complete all as specified and as directed . Make: KILOSKAR - ETERNA, Model SJPBS 42420- HL /CROMPTOM GREAVES/L&T |
| 68 | S&F 5 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes all as specified and directed. |
| 69 | S & F 4.8 mm thick Frosted plain glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified and directed. |
| 70 | Excavating in post holes soft /loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 71 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 72 | M&L 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays, surface finished even and fair without using extra cement complete all as specified and directed. |
| 73 | S&F Machine pressed precast concrete interlocking paver block any shape and size with grey cement with pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade all as specified and directed. |
| 74 | M &L for preparation of existing treatment applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on old surfaces complete all as specified and directed |
| 75 | Supply only integral water proofing compound. |
| 76 | S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250) quality-A complete all as specified and directed. |
| 77 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 78 | S & F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 79 | S & F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges , valley gutter, Sun shed etc fixed with self tapping screws complete all as specified and directed. |
| 80 | (E/M PORTION)Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 81 | (E/M PORTION)Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and directed. Please Enable Macros to View BoQ information |