|
| 1 | Please Enable Macros to View BoQ information |
| 2 | S&F in repairs bib taps of brass cast copper alloy with chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and as directed. |
| 3 | S&F in repair stop valves 15mm bore concealed cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle and fixed complete all as specified and as directed. |
| 4 | S&F in repair pillar tap cast copper alloy 15mm bore with capstan head, chromium plated, screwed down high pressure, with long screw shank and fly nuts, screwed for iron pipes complete all as specified and as directed. |
| 5 | S&F in repair pillar tap (swan neck) cast copper alloy 15mm bore with capstan head, chromium plated, screwed down high pressure, with long screw shank and fly nuts, screwed for iron pipes complete all as specified and as directed. |
| 6 | S&F in repairs 10 Ltr capacity PVC valve less syphonic action type flushing cistern low level white with inlet valve float and handle and bracket complete all as specified and as directed. |
| 7 | S&F in repair PVC connections 45cm long fitted with brass nuts with washer on both ends fixed complete for 15 mm bore pipe complete all as specified and as directed. |
| 8 | S&F in repairs NT Grating doom 100 mm dia of PTMT (minimal weight 25 gms) complete all as secified and as direted. |
| 9 | Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and as directed. |
| 10 | Description all as per srl item No 08 here-in-before but for 25mm dia complete all as specified and as directed. |
| 11 | S&F CPVC pipe SDR II having outer dia 20mm pipe with plain CPVC SDR II fitting such as bends, elbows, unions and end pieces to receive the fittings and fixed with solvent cement in walls/ceilings (concealed/surface) or laying in floors complete all as specified and as directed. |
| 12 | Description all as per srl Item No.10 here-in-before but for 25 mm outer dia pipe complete all as specified and as directed. |
| 13 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and as directed. |
| 14 | S&F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminum hinging device, seat and cover for pedestal pan complete all as specified and as directed. |
| 15 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 16 | S&F in repairs brass chromium plated tubular towel rail 20mm dia & 60 cm long between flange complete all as specified and as directed. |
| 17 | S&F in repairs soap dish fixed to plugs with chromium plated brass screws completed all as specified and as directed. |
| 18 | S&F in repairs glass shelf assembly completed all as specified and as directed. |
| 19 | S&F in repairs looking mirror 600 x 450 mm bevelled edge of selected quality glass, mounted on 6mm thk AC bldg board or commercial plywood & fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 20 | Hacking out old broken glass (any thickness size, quality, description)from wooden frame or stone concrete or bricks surrounding glazed with putty or fixed with beads n.exc 1.5 Sqm in each pane complete all as specified and as directed. |
| 21 | S&F 4mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square n. exe. 0.5 sqm in each pane complete all as specified and as directed. |
| 22 | S&F 4mm thick Figured glass pin headed type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 23 | S&F in repairs 300mm length Aluminium alloy, anodised, sliding door bolt with hasp, staples(bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed. |
| 24 | S&F in repairs Aluminum anodized barrel tower bolt of extruded section 150mm long complete all as specified and as directed. |
| 25 | S&F in repairs aluminium anodised barrel tower bolt all as above but 75mm long complete all as specified and as directed. |
| 26 | S&F in repars butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and as directed. |
| 27 | S&F in repair 19/20 mm dia Aluminium powder coated pipe for curtain rod complete all as specified and as directed. |
| 28 | S&F in repair aluminium powder coated brackets for srl item No 26.00 complete all as specified and as directed. |
| 29 | S&F in repairs floor door stopper of aluminium alloy body and double tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and as directed. |
| 30 | S&F in repairs stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed. |
| 31 | S&F 2nd class HW plain fillets rectangular or triangular section wrought fixed screws n.exc 3 sqcm complete all as specified and as directed. |
| 32 | Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified and as directed. |
| 33 | M&L rendering 15mm thick in CM 1:6 on brick work / stone work or concrete surface work finished even and smooth without using extra cement complete all as specified and as directed. |
| 34 | Description all as per srl item No 32 here-in-before but 5mm thick in CM 1:3 on ceiling, chajja, roof projection etc complete all as specified and as directed. |
| 35 | M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work / stone work or concrete surfaces mixed with WPC as per manufacturer instruction and finished the surface fair and even complete all as specified and as directed. |
| 36 | M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1 to 2 mm thick wall care putty complete all as specified and as directed. |
| 37 | M & L newly plasterered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed. |
| 38 | M&L preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of alkaline resistant primer complete all as directecd. |
| 39 | Supply only water proofing compound complete all as specified and as directed. |
| 40 | M&L preparing surfaces, plastered or unplasterd old decorated ceiling surfaces including cornices pilasters etc and applying two coats of white wash on ceiling complete all as specified and as directed. |
| 41 | M&L preparing surfaces, plastered or unplasterd old decorated ceiling surfaces including cornices plasters etc and applying one coat of white wash on ceiling complete all as specified and as directed. |
| 42 | M&L preparation of old decorated wall surfaces and applying two coat of distemper oil emulsion on walls including filling of cracks, holes and levelling the surface where undulation found with putty etc. complete all as specified and as directed. |
| 43 | M&L preparation of old decorated wall surfaces and applying one coat of distemper oil emulsion on walls including filling of cracks, holes and leveling the surface where undulation found with putty etc. complete all as specified and as directed. |
| 44 | M&L preparation of old decorated surfaces of walls and applying one coat of cement based paint on wall complete all as specified and as directed. |
| 45 | M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 46 | M&L preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
