|
| 1 | B/R WorksDemolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc., but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed. |
| 2 | Excavation in trenches not exceeding 1.5 m deep and not exceeding 1.5 m wide and getting out in soft soil/ disintegrated rock/ laterite rock complete all as specified and as directed. |
| 3 | Removing excavated soil to a distance not exceeding 50m, depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 4 | Returning filling in excavated earth work including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any strata complete all as specified and as directed. |
| 5 | Material and labour for precast cement concrete block masonry with solid blocks made out of PCC 1:3:6, type C-1 with using 20mm graded stone aggregate, exceeding 10cm in width and setting in cement mortar 1:6 etc. complete all as specified and as directed. |
| 6 | Rendering 10 mm thick on stone/concrete surfaces to be finished even and smooth (without using extra cement) in CM mortar 1:6 complete all as specified and as directed. |
| 7 | Material and labour for preparation of new plastered surface of internal walls and applying two coats of oil bound distemper over a coat of primer With 2 to 3 mm Wall Care Putty complete all as specified and as directed. |
| 8 | Material and labour for 15 mm thick rendering on fair faces of brick /concrete Exterior surfaces in cement mortar 1:4 in two layers (10 +5) second layer of 5mm mixed with WPC (including WPC) as per manufacturer's instructions and finished even and smooth without using extra cement complete all as specified and as directed.Note: WPC will be measured and paid separately |
| 9 | Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces etc. complete all as specified and as directed. |
| 10 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frame) including holes for taking out hold fasts or dismantling brick work for holes (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and as directed. |
| 11 | Taking down chowkats or frames exceeding 1.5 Sqm each but not exceeding 4 sqm each with shutters (without taking off shutters from the frame) including holes for taking out hold fasts or dismantling brick work for holes (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and as directed. |
| 12 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed.Note: The unit rate quoted by contractor includes cost of glass and wire mesh includes all other connected accessories. Net Opening will be measured lor payment purpose. |
| 13 | Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and as directed. |
| 14 | Material and labour for hardcore with broken stone aggregate of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface all as specified and as directed. |
| 15 | Material and Labour for Cement concrete type C-2, 1:3:6 40mm graded aggregate 100mm thick complete all as specified and as directed |
| 16 | Material and Labour for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directedNote: Cement screed bed shall be measured and paid separately |
| 17 | Material and Labour for cement concrete type B-2, 1:2:4 40mm graded aggregate 75 mm thick as in plinth protection etc. complete all as specified and as directed. |
| 18 | Material and labour for Plain Cement Concrete 1:4:8 type D-2, using 40mm graded stone aggregate as in 100mm thick sub base, finishing the surface even and fair all as specified and as directed. |
| 19 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed |
| 20 | Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment complete all as specified and as directed. |
| 21 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed. |
| 22 | Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated MANGALORE PATTERN PROFILE SHEET steel sheet 0.50 mm of an colour having tensile strength of 550 MPA as in roof covering/cladding fixed with self tapping screws complete all as specified and as directed. |
| 23 | Supply and fix pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm of an colour having tensile strength of 550 MPA as in roof covering/cladding fixed with self tapping screws complete all as specified and as directed. |
| 24 | Supply and fix 1.25 mm thick 100 mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and as directed. |
| 25 | Dismantling structural steel in framed trusses, purlin rafter, columns are required to be taken as under by cutting rivets complete all as specified and as directed. |
| 26 | Material and labour for PCC 1:4:8 type D2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and as directed |
| 27 | Excavation in post holes(similar holes) each not exceeding 0.5 Cum, getting out, soft/disintegrated rock returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering, and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed. |
| 28 | Supply and fix mild steel sections for joist, channel, angle or tee sections, post, etc. fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410-W (gde-E-250) quality-A etc. complete all as specified and as directed. |
| 29 | Supply and Fixing Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe-290 (Gde E- 165) complete all as specified and directed |
| 30 | Material and labour for applying two coats of synthetic enamel paints over a coat of red oxide primer to new steel surface, not otherwise described, over 10cm width or girth including preparation of new surface complete all as specified and as directed. |
| 31 | Supply and Fixing Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment o FE -410W (Gde -E-250) Quality B complete all as specified and as directed |
| 32 | Supply and Fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers an one hexagonal or square nut, exceeding 30cm long and diameter of neck exceeding 12mm, not exceeding 20mm complete all as specified and as directed |
| 33 | Supply and fix anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling complete all as specified and as directed. |
| 34 | Material and labour for hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long complete all as specified and as directed. |
| 35 | Material and labour for providing and fixing Decorative Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed. |
| 36 | Supply and fix non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. superior premium quality, grade B-1 as per IS in Water splashing floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed. |
| 37 | Supply and fix non Skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in vertical surface/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in CM 1:4 on fair faces on brick/ concrete surfaces complete all as specified and as directed. |
| 38 | Material and labour for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match faces of brick or stone surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 39 | Material and labour for powder coated anodised aluminium ventilator shutters with frame powder coating of any colour(Thickness or powder coating not less than 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. |
| 40 | Supply and fix Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides M.S. stay shall be provided at the bottom to steady the frame complete as specified and as directed. |
| 41 | Supply and fix 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete as specified and as directed. |
| 42 | Supply and fix butt hinges of size 100 mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised type B-21 complete all as specified and as directed. |
| 43 | Supply and fix aluminium anodised, barrel tower bolts of length 200mm extruded section complete all as specified and as directed. |
| 44 | Supply and fix 150mm size extruded aluminium alloy handle fabricated type anodized complete all as specified and as directed. |
| 45 | Supply and fix aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed. |
| 46 | Material and labour for providing and fixing stainless steel (Grade 304) railing, benches made of hollow tubes, channels, plates etc. SS RAIL including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement. including all fittings and necessary items complete all as specified and as directed. |
| 47 | Supply and fix 12 mm thick toughened glass as in hinged doors, including Solar control film 25 micron reflective type (gareware sun control or equivalent) partitions automatic doors and similar work including cutting to shape, drilling holes required. Including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. |
| 48 | Supply and fix double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 49 | Supply and fix decorative curtain rod MS CP with fixing brackets, stops and rollers 25 mm dia complete all as specified and as directed. |
| 50 | Supply and lay of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all necessary fittings required for fixing complete all as specified and as directed. |
| 51 | (a) 20 mm dia pipe |
| 52 | (b) Brass Elbow 20 MM |
| 53 | (c) Brass Tee 20 MM |
| 54 | (d) Brass tank adaptor 20 MM |
| 55 | (e) Brass union 20 MM |
| 56 | (f) Brass ball valve 20 MM |
| 57 | Supply and fix ball brass valves, 20mm bore high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 58 | Supply and fix 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 59 | Supply and fix wash basins vitreous china, angle back size 600x480 mm white excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed. |
| 60 | Supply and fix 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 61 | Supply and fix bib taps 15mm bore, fancy type cast copper alloy, with capstan heads , chromium plated , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified and as directed. |
| 62 | Supply and fix in repairs stop valve/ angle cock 15 mm bore, fancy type chromium plated cast copper alloy screwed down, high pressure with crutch and screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 63 | Supply and fix vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed. |
| 64 | Material and labour for vitreous china European type water closet with inbuilt flushing cistern and with seat cover fixed with all necessary accessories for fittings complete all as specified and as directed. |
| 65 | Supply and fix health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 66 | Supply and fix chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 67 | Supply and fix toilet paper holder with flat recessed type stainless steel Complete fixed with chromium plated screws complete all as specified and as directed. |
| 68 | Supply and fix CP Soap dish any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 69 | Supply and fix PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 70 | Supply and Fix PVC Rotational moulded polythene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I (500 litres capacity) complete all as specified and as directed. |
| 71 | Material and labour for 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 72 | Supply and fix 110mm PVC (SWR) WC connector bent type complete all as specified and as directed. |
| 73 | Material and labour for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in walls complete all as specified and as directed. |
| 74 | Material and labour for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in walls complete all as specified and as directed. |
| 75 | Supply and fix 75mm bore PVC (SWR) bends any radius provided with access door complete all as specified and as directed. |
| 76 | Supply and fix 100mm bore PVC (SWR) bends any radius provided with access door complete all as specified and as directed. |
| 77 | Material and labour for cement concrete in sunken floor type E-2 1:5:10 (40 mm graded), filling and mass concrete complete all as specified and as directed. |
| 78 | Material and labour for cement concrete 25 mm thick type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and as directed. |
| 79 | Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate 12 Kg per Sqm including cleaning surfaces complete all as specified and as directed. |
| 80 | E/M WorksTaking down carefully old existing batten/PVC casing capping (or) conduit point aluminium/copper wiring i.e. light, fan, Bell, socket including batten/ casing/ conduit, switch boards, laminated sheets, round blocks, MS Sunken boxes, light fittings/holders of any type, other fittings & fixtures and making good the disturbed surfaces, walls, floors and stair cases complete all as specified and as directed. |
| 81 | Taking down old aluminium sub main wiring from existing batten/ PVC concealed conduit/ casing and capping of any size complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 82 | Taking down old aluminium sub main wiring from existing batten/ PVC concealed conduit/ casing and capping of any size complete all as specified and as directed. Please Enable Macros to View BoQ information |
