|
| 1 | Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed . |
| 2 | Taking down of wooden chowkats or frame with shutters (without taking off shutters from the frames) exc. 1.50 Sqm & n.exc. 4 Sqm each complete all as specified and directed . |
| 3 | Supply & fix mild steel work as in hold fast etc and similar articles confirming Fe-290 Gde E-165 complete all as specified & directed. |
| 4 | M&L Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.including (powder coating 50 Micron) complete all as specified. |
| 5 | M&L Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc .including (powder coating not less than 50 micron) complete all as specified.. complete all as specified. |
| 6 | Supply & fix in repair 3mm thick sheet glass, frosted type ordinary quality glazing with oil putty or fixed aluminium ventilator/ windows in square n.exc. 0.50sqm each pane. |
| 7 | S&F 4mm thick plain sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete. |
| 8 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples |
| 9 | M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified. |
| 10 | M&L Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified & directed. |
| 11 | Supply & fix second class hard wood (Hollock) 35m thick glazed and skeleton factory made shutter for door open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, size members of shutters as specified in SSR Part-I Sec 8, Clause 8.24 (a) complete all as specified and directed . |
| 12 | Supply & fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed. |
| 13 | S&F 18/19 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination incl teak wood liping 6mm thick on sides complete all as specified and directed. |
| 14 | S&F 12mm thick plywood grade BWR with 1.5 mm decorative laminate both side type -I complete all as specified. |
| 15 | Supply & fix mild steel 150 mm, Helical door spring including roller and roller plate for door shutters complete all as specified and directed . |
| 16 | Supply & fix Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed . |
| 17 | Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-290, E-165. |
| 18 | Supply & fix mild steel butt hinges 100mm size medium weight, cold rolled complete all as specified and directed. |
| 19 | Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified and directed. |
| 20 | Supply & fix 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed. |
| 21 | Supply & fix 250 mm long Aluminium alloy, Sliding door bolts, with hasp, staple and fixing clips of sheet, cast or extruded section and fixing bolts of extruded section or cast aluminium alloy complete all as specified & directed. |
| 22 | Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 23 | Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed . |
| 24 | S & F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhats of size 50 x 100 mm comprising of virgin PVC ploymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixede in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerence in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 25 | S&F factory made solid PVC Moulded door shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing . |
| 26 | Taking up or steel tubing & connections including cleaning for refixing bore of pipe 15mm etc complete all as specified and directed |
| 27 | Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed . |
| 28 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.(Including all necessary fittings) |
| 29 | S&F tank adapter 20mm complete all as specified and directed |
| 30 | Supply & fix in repairs pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed. |
| 31 | Supply & fix in repairs Fancy type bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed. |
| 32 | Supply & fix in reapir 15mm bore Angular Stop valve cast copper alloy fancy type chromium plated, complete all as specified and directed. |
| 33 | S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour all as directed and specified. |
| 34 | Supply & fix in repairs vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed. |
| 35 | Supply & fix in repairs PVC low level flushing cistern of 10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed. |
| 36 | Supply & fix in repairs chromium plated shower roses with swivel joints of 125mm size complete all as specified & directed. |
| 37 | Supply & fix in repairs PVC connections of 600 mm long of PRYAG Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. |
| 38 | Supply and fixing in Repair PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed. |
| 39 | Supply & fix in repair for 600 x 450 mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed . |
| 40 | Supply & fixing in repairs rotational moulded polyethylene water storage tanks 1000 liters capacity three layered (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed. |
| 41 | S&F in repair Stop valve/gate valve 20mm of PTMT any colour high pressure screwed for iron pipe and fixed.all as per specidied and directed |
| 42 | Demolition and breaking of drain pipes of 110/75mm size etc complete all as specified & directed. |
| 43 | Supply and fix PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed. |
| 44 | Supply and fix PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed. |
| 45 | Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.(ISI Marked) |
| 46 | Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.(ISI Marked) |
| 47 | Material & labour for 75mm bore PVC floor traps plain fixed in repairs including jointing with solvent cement complete all as specified & directed. |
| 48 | S&F grating doom 100mm dia of PTMT (Minimum weight 25gms). |
| 49 | Supply & fixing MS tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified & directed. |
| 50 | S&F of white/colour PVC Cabinet Mirror of Size 350 mm X450 mm of approved make by engr in charge |
| 51 | Supply and fix sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromiun plated bracket guard and railing 60 cm long |
| 52 | S & F Plate Rack made out of 0.80 mm thick stainless steel of size size 90cmx75cmx25cm with all internal fittings (as per sample) approved by Engr -in-Charge. |
| 53 | Supply & fix (in repairs) sink with draining board made of stainless steel 1.00mm thick for kitchen with plug, washer and waste pipe including fixing cantilever brackets and connecting union to pipes overall size 915mmx420mm, bowl size 410mmx330mmx160mm complete all as specified and directed. |
| 54 | S&F in repairs 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed. |
| 55 | Demolition of cement concrete in ground floors and saving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed . |
| 56 | Material & labour for 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub base of floor complete all as specified & directed. |
| 57 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed . |
| 58 | M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete |
| 59 | M&L vitrified coloured ceramic tiles 10 mm thick (square or rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc over and including 15mm thick screed bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match complete. |
| 60 | Description all as per Ser Item No 59 above but as in Skirting with 10mm thick rendering in CM 1:3 |
| 61 | M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement. |
| 62 | Material & labour for PCC 1:3:6 type C-1 using 20mm graded stone aggregates as in bed block, copings, benching, roof kerbs etc, incl cutting into bricks or stone wall as required for inserting hold fasts complete all as specified and directed. |
| 63 | M&L 75mm thick PCC 1:3:6 type C-2 as in plinth protection, path etc finished the surface even & fair complete all as specified |
| 64 | Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with 2mm thick wall care putty and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted complete. |
| 65 | Materials & labour for complete removal of existing treatmemt and finishing the surfaces of wall with two coats of cement base paint of, any colour, complete all as specified & directed. |
| 66 | Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description. |
| 67 | M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 68 | Material & labour 15mm thick rendering in CM 1:6 on fair fair faces of brick wall or concrete surfaces finished even and fair complete all as specified |
| 69 | Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified. |
| 70 | Materials & labour for prepration of newely plastered surfaces of wall and applying two coat of Oil Bound distemper on walls, including 2mm thick putty white or tinned over a coat of chalk whiting complete all as specified & directed. |
| 71 | Dismantling Wall and ceiling boards of any description and any thickness including cover fillets. |
| 72 | M&L providing aluminum snap Grid frame work for false ceiling with of size 595x595 mm, using main and cross Tee of size 36.5 mm x 25mm x 1.4 mm, weighing 0.24 Kg/RM and 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM respectively. The snap grid shall be supported at end all along the wall with alu anodized angle of size 40 mm x 25 mm x 2 mm weighing 0.36 Kg/RM . the snap grid shall be fixed to ceiling supporting hangers consisting of 2 mm dia MS wire, J bolts, nuts and washers as per manufacturer's instructrions. Note : If any aluminum section found of less weight, the same ahall be worked out by actual weight and recovery @ Rs. 230/- Kg shall be made from contractors dues. |
| 73 | M&L 4mm thick Non asbestos fibre designer cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws . |
| 74 | S&F fancy type sofia bracket for the curtain rod (suitable for 20mm dia) of any color as approved and fixed to rackets all as specified and directed. |
| 75 | S&F in reapir MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as approved and fixed to rackets all as spcd and directed.. |
| 76 | Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof covering |
| 77 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 78 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 79 | Dismantling timber scantlings 40 sqcm and over in section, in any position. |
| 80 | S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats et conforming to I. S 1161-1979 FE-410(Gde E-250, quality A). |
| 81 | M&L 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of pigment |
| 82 | Demolition of brick work/ PCC block built in CM incl all quoins arches, pillars etc including removing the same where directed complete all as specified & directed . |
| 83 | M/L brick work with sub class B bricks built in CM 1:6 straight or curved exceeding 6m mean radius all as specified |
| 84 | M/L brick work with sub class B bricks built in CM 1:6 straight or curved on plan to any radius in half brick thick wall built in all as specified and directed |
| 85 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for |
| 86 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified and directed |
| 87 | Material & labour for RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in beams, lintel, lintel band etc complete all as specified and directed. |
| 88 | Supply & fix mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 89 | Supply & fix mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending as in stirups complete all as specified and directed. |
| 90 | Material & labour for pre-cast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cover slabs, set in CM 1:6 including necessary form work and finishing to exposed surfaces complete all as specified and directed. |
| 91 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete including all as specified & as directed. |
| 92 | S&F 110 mm PVC(SWR) vent cowl |
| 93 | Demolition and breaking of SGSW or RCC drain/Soil pipes jointed in cement mortar and taking out from trenches if required internal diameter 150mm. |
| 94 | Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed. |
| 95 | Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed. |
| 96 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed. |
| 97 | M&L for 100 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete including all as specified & as directed. |
| 98 | M & L PCC 1:2:4 ty B-1 (20mm graded aggt) as in bed block coping benching all as spd and directed |
| 99 | M & L PCC 1:3:6 type C2 as Concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in |
| 100 | Supply & fix 150mm dia salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed in CM 1:1 including testing complete all as specified and directed. |
| 101 | M & L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc. |
| 102 | Use & waste frame work to sides and soffits of floor or roof slab, chajjas not exc 200 mm thick (Horizontal or sloping) rough finished complete. |
| 103 | PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof kerbs, benches and water troughs etc. including necessary moulding complete all as specified & directed. |
| 104 | M&L Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) set in CM 1:6 in window or door cills, lintels,bressumers, steps, quoin blocks (for use with masonry), copings, kneelers, apex stones,, columns, posts, with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match. |
| 105 | M&L for PCC type E2, 1:5:10 (using 40mm graded stone agg) as in foundation, filling and mass concrete. |
| 106 | Demolition of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc |
| 107 | M&L screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 for fixing tiles. |
| 108 | M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including circular cutting,chamfering of edges as required. |
| 109 | M&L for broken bricks hardcore of gauge n exc. 63mm, deposited, spread and levelled in layer n exc. 15cm thick, watered and rammed to a true surface complete. |
| 110 | M&L for 100mm thick PCC type C2, 1:3:6 (using 40mm graded stone agg) as in sub base floor surface complete. |
| 111 | M& L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment in paths and hardstanding laid tightly over dry sand cushion (compacted) and joint filled with dry sand(colour and pattern as approved by GE) complete all as specified and directed. (Note: Sand will be measured and paid separatly). |
| 112 | M &L for Sand filling under floors or in foundations including watering and consolidation. |
| 113 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for |
| 114 | M&L rendering 10mm thick in CM 1:6 on fair faces of brick work , finished even and smooth without using extra cement. |
| 115 | 5 mm thick cement plastering in cement mortar 1:3 as on ceiling surfaces finished even and smooth without using extra cement. |
| 116 | Preparation of new plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified. |
| 117 | M & L preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty complete. |
| 118 | M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisteance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted) with silicon additives @ 1.43 litre /10 sqm over and including priming coat of exterior primer appplied @ 0.90 litre /10sqm over a coat of wall putty on new plastered wall surfaces incl preparation. |
| 119 | Supply only liquie water proofing compound as per manufacture instruction. |
| 120 | Supply & fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed. |
| 121 | S & F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm |
| 122 | S&F powder coated aluminium frame of size 65mm x 38mm x 1.00 thick or appropriate section as directed including with frame standard section for sliding type windows /ventilatorss with one or more rebates including joining cleats, beading, handle with locking arrangement, rubber gasket for fixing etc complete with and including 5.5 mm thick tinted glass n.exc 1 Sqm each panes (window of frame 3 tract wt not less than 0.50kg/RM and shutter having wt not less 0.45kg/RM) all as specified and directed |
| 123 | S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed. |
| 124 | S&F extruded steel alloy handles, fabricated type, size of handle 150 mm, |
| 125 | S&F steel alloy 200mm long barrel tower bolts of extruded section, |
| 126 | S&F steel alloy, slidnig door bolt with hasp and staple and fixing clips of sheet, cast or extruded section, and fixing bolts and sliding bolts of electrogalvanised plate and bright bolt and fixed length of bolt 300 mm. |
| 127 | M & L for repairing broken edges of chajja's, roof projection, Fascias etc . In small widths/depths ( exposed area exc 0.05 sqm but n exc 0.10 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately) |
| 128 | Demolition of Brick tiles or terracing tiles, single layer on roofs |
| 129 | M&L rendering 10 mm thick in CM 1:3 on fair faces of brick work/concrete surface using polymers based liquid water proofing compound as in roof. |
| 130 | M&L for applying evenly a tack coat of Industrial Bitumen 85/25 grade @ 1.20 Kg per SM meter as in roof complete all as per manufacturer instrcution . |
| 131 | M&L for laying APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) including bitumen primer @ 0.3 Kg per Sqm by torch application method and applying aluminium paint over finished surface (overlap while torching shall be 75 mm on length and 100mm width side). All angles & abutments should sealed with extra care to ensure full bondage and cutting out grooves where necessary as per manufacturers instructions. |
| 132 | Demolition of brick laid flat or on edge in floors, channels, kerbs, approns, etc (each layer) laid bedded and pointed in any mortar. |
| 133 | M & L for cement concrete 1:4:8 type D2 using 40 mm graded aggregate as in foundation , filling and mass concrete including demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 134 | Plain Cement Concrete Type B2 1:2:4 ( using 40 mm graded aggregte) as in Surface channel and drains. |
| 135 | M&L PCC C1 1:3:6 type C1 using 20 mm graded stone aggregate as in coping of drain including necceesry form work & demolition complete |
| 136 | M&L providing precast cover slab in cement concrete type B1 (1:2:4) using 20mm graded crushed stone aggregate and set in cement mortar (1:6) all as specified |
| 137 | S & F RCC hume pipe 450 mm bore class NP-2 laid & jointed complete with collars as specified and as directed |
| 138 | M&L for prepration of new plastered surfaces of walll applying three coat of white wash on plasterd surface complete all as specified and directed. |
| 139 | Taking down copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, pendents, regulators, sockets, light fittings, wooden boards, bell push, call bell, regulators etc (credit scheduled for above items should be made as per condition separately) and making good to disturbed wall and surface complete all as specified. Please Enable Macros to View BoQ information |
| 140 | Taking down copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, pendents, regulators, sockets, light fittings, wooden boards, bell push, call bell, regulators etc (credit scheduled for above items should be made as per condition separately) and making good to disturbed wall and surface complete all as specified. Please Enable Macros to View BoQ information |
