|
| 1 | Preparing plastered or unplastered old decorated surfaces of wall and applying one coat of white wash complete all as specified . |
| 2 | Preparing plastered or unplastered old ceiling surfaces and applying one coat of white wash complete all as specified. |
| 3 | Preparing old decorated plastered or unplastered wall surfaces and applying one coat of oil bound distemper white or tinted complete all as specified. |
| 4 | Preparation of old decorated plastered or unplastered wall surfaces and applying one coat of cement base paint white or tinted complete. |
| 5 | Preparation of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 6 | Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified. |
| 7 | Preparing plastered or unplastered old decorated surfaces of wall and applying one coat of exterior grade weather proof paint complete all as specified and directed. |
| 8 | Complete removal of existing treatment and applying two coats of Oil bound distemper on surfaces of walls over a coat of wall putty and primer including necessary preparation of surfaces all as specified and as directed. |
| 9 | Complete removal of existing treatment and applying two coats of exterior grade weather proof paint on surfaces of walls over a coat primer including necessary preparation of undecorated surfaces with putty all as specified and as directed. |
| 10 | Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified. |
| 11 | M&L using rendering 5 mm thick CM 1:3 on ceiling or concrete surfaces, finished even and smooth without using extra cement complete all as specified. |
| 12 | M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick/concrete surfaces , finished even and smooth without smoothing extra cement complete all as specified and directed. |
| 13 | M&L for rendering 15 mm thick of brick work or concrete surfaces in CM 1:4 (Water proofing compund paid separtately) finished even and fair surfaces without using extra cement, complete all as specified and directed by Engr-in-Charge. (WPC paid and measured seprately) |
| 14 | Supply only Liquid water Proofing Compound |
| 15 | M&L preparing newly plastered surfaces of ceilings and applying three coat of white wash. |
| 16 | M&L preparing newly plastered surfaces of walls and applying two coats of Oil bound distemper on untreated plastered surfaces of walls over a coat of wall putty and primer including necessary preparation of surfaces all as specified and as directed. |
| 17 | M&L preparing newly plastered surfaces of walls and applying two coats of exterior grade weather proof paint on untreated plastered surfaces of walls over a coat of primer including necessary preparation of surfaces all as specified and as directed |
| 18 | Obliterating old writing of any description, n exc 0.1 Sqm and writing Building numbers with synthetic enamel paint on black base with white numbers and letters as per existing pattern Note: Entire Numerical and alphabets will be treated as one job |
| 19 | M&L for cutting and removing with chiesel and taking out the vegetation roots of plants grown on the roof and external surface walls at any height etc by taking all necessary precaution including digging out roots of vegetation and filling holes with PCC (1:2:4) type B1 using (20mm garded stone aggregate) after application of suitable chemical using \\"break manufactured by M/s Denocil Company to avoid regrowth of the vegetation and removing the debris to a distance not.exc 50 metre complete all as specified and directed. |
| 20 | Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit. |
| 21 | All as per Sl. item No 20 here in before but n exc 1.5 Sqm each |
| 22 | Taking down shutters of any description area exc 1.00 Sqm and n exc 2 Sqm each. |
| 23 | Taking down shutters of any description or type area exc 1.00 Sqm and n.exc 2 sqm and refixing in same opening after necessary repairs |
| 24 | Taking down shutters of any description or type area n.exc 1.00 Sqm and refixing in same opening after necessary repairs |
| 25 | M&L for cutting holes in brick wall built in cement mortor or cement lime mortor and stone walls built in lime mortor exc half brick but not exc one brick ( Depth of embedded portion of holdfasts or lugs measured from face of jamb in to the wall) all as specified |
| 26 | S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints |
| 27 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile mensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 28 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile mensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 29 | S&F for Providing and fixing factory made single extruded WPC (Wood Polymer omposite) solid decorative type flush door shutter of size 30mm thick comprising of irgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal trength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 30 | S&F second class hard wood 35 mm flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides |
| 31 | S&F second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers. |
| 32 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows |
| 33 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows |
| 34 | S&F FI 25x3mm for hold fasts stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay),conforming to Fe 290 GDE E-165 |
| 35 | Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & grith, not otherwise described & treated with tar or coal tar black paint treating treating ends of posts, backs of Chowkats, etc., area tarred exc 0.1 sq.m but n exc 0.5 sq.m. each |
| 36 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in opening including making good to the jambs as per specification all as directed.Note: The quote rate shall be inclusive of following:-(i) Existing/new wall edges shall be finished properly in cement plaster in CM 1:4 including supply and fixing of 6 Nos wooden plugs for catch door frame size not exc 17 sqcm average sectional area and 100mm long. (ii) Frame shall be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS Screw, 3 each on either side |
| 37 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 38 | S&F Powder coated aluminums frame for doors,sliding windows, ventilators and with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc. complete all as specified and directed. |
| 39 | S & F Powder coated Aluminium doors, window and ventilators shutters, without sash bar, aluminum section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws etc complete all as specified and directed. |
| 40 | S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tanks and similar work confirming to Fe-290 Gde E-165 incl dismantling |
| 41 | S&F Stainless steel Butt hinges,100mm medium weight and fixed |
| 42 | S&F Stainless steel Butt hinges, 75mm medium weight and fixed |
| 43 | S&F 100mm Butt hinges, extruded Aluminum alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 |
| 44 | S&F extruded aluminum alloy handles,150mm fabricated type anodized |
| 45 | S&F extruded aluminium alloy handles,100mm fabricated type anodized |
| 46 | S&F Alluminium, 150mm anodized, barrel tower bolts extruded section & fixed |
| 47 | S&F Alluminium, 100mm anodized, barrel tower bolts extruded section & fixed |
| 48 | S&F Aluminium alloy, anodized, 250mm sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed |
| 49 | S&F mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 50 | S&F 150mm Floor door stopper of aluminum alloy body & single legged with hard drawn steel spring, fixed in door shutters. |
| 51 | M&L preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats synthetic enamel paint over one coat of prink primer |
| 52 | Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads. |
| 53 | S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m or in aluminium glazing clips in each pane |
| 54 | S&F 4 mm thick Figured glass, pin headtype and glazing with oil putty in squares n exc 0.5 sq. m or in aluminium glazing clips in each pane |
| 55 | S&F in repairs Aluminium anodised tubular curtain rod 20mm dia with brackets. |
| 56 | M&L Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 57 | Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 20mmm complete complete including taking down old pipes all as specified as as specified |
| 58 | Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 25mm complete complete including taking down old pipes all as specified as as specified |
| 59 | Supplying and laying of brass elbow of CPVC pipe outer diamter of 20 mm |
| 60 | Supplying and laying of brass Tee of CPVC pipe outer diamter of 20 mm |
| 61 | Supplying and laying of brass elbow of CPVC pipe outer diamter of 25mm |
| 62 | Supplying and laying of brass Tee of CPVC pipe outer diamter of 25 mm |
| 63 | M&L taking up or down steel tubing and connections, including cleaning for refixing of GI water tubing of 15mm boreall as specified and directed |
| 64 | M&L taking up or down steel tubing and connections, including cleaning for refixing of GI water tubing of 20mm boreall as specified and directed |
| 65 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm all as directed |
| 66 | S&F for grating doom 100mm dia of PTMT minimum weight 25 gms |
| 67 | S&F in repairs for 40mm dia PVC waste pipe 450mm long for sink/wash hand basin |
| 68 | S&F in repairs vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor . |
| 69 | S&F in repair Vitreous China wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, seat cover etc, complete all as directed |
| 70 | S&F in repairs vitreous China wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed |
| 71 | S&F in repairs 10 liters capacity PVC low level flushing cistern complete with ISI marked body and ISI marked syphon (Make shall be Parryware Slimline or equivalent) |
| 72 | S&F in repairs 15mm fancy type chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed |
| 73 | S&F in repairs bib cock long body with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed all as specified |
| 74 | S&F in repairs pillar cock, fancy type chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore |
| 75 | S&F in repairs CP wall mixer with for mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe |
| 76 | S&F in repairs bevelled edge mirror of size 600X450mm of selected quality glass mounted on 6mm thick AC building boards or on commercial plywood with aluminium beading alround and fixed to wooden plugs with CP brass screws, fixed in repairs. |
| 77 | S&F in repairs towel rail 600 mm long of PTMT fixed with and including chromiumplated brass screws and plastic cleats.(Minimm weight 190 gms) |
| 78 | S&F in repairs chromium plated 125mm shower roses with or without swivel joints, any size, including fixing to steel pipe or union |
| 79 | S&F in repairs sinks with drianage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm |
| 80 | S&F in repairs Bib cock two way double Handle with flange, fancy type chromium plated,screwed down,screwed for iron pipe, 15mm bore for brass ferrule and fixed all as specified Make (Prayag- Cat Part No 8312 Or Equivalent) |
| 81 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 82 | S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device. |
| 83 | Demolition of existing roof treatment of any description completely and brushing the cleaned surfaces of concrete with neat cement slurry @ 3Kgs of cement per sq.m.complete all as specified and as directed. remove all the debris from site and rubbish off the premises complete |
| 84 | M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate over the roof slab 25mm thick, finished even and fair without using extra cement all as specied and directed. |
| 85 | M&L for 10mm thick cement plaster in CM 1:3, mixed with water proofing compound over the levelling course while the concrete is green, finished even and smooth without using extra cement all as directed.”Note : WPC shall be measured and paid separately. |
| 86 | M&L for APP Modified prefabricated five layer water proofing membrane, not less than 3 mm thick and weighing not less than 3.80 kg/SQM reinforced with non woven polyester matt black finished over compatible primer @ 0.3 Ltrs per SQM, and a bonding bitumen of VG-10 at 1.20 kg/SQM torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminum paint @ 0.10 litre/SQM over APP membarene a coat of blown bitumen 85/25 grade @ 1.20Kg/SQM over the bitumen primer. The Overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage including preparatory work and dismantling existing water proofing treatment.Note: The work shall be carried out by authorized applicators of manufacturers |
| 87 | S&F in repairs 15mm fancy type chromium plated with long shank and cup concealed type angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed |
| 88 | S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight 20mm-210gms. |
| 89 | S&F in repairs 25 mm bore of Gun metal globe or gate, valves with iron screwed both ends for iron pipe and fixed |
| 90 | M&L for cutting down plants/trees of upto 10cm girth and applying ROUNDUP/GLYPOCET or equivalent (Herbal medicine) to roots of roof tops/sides, external walls of bldg chajjas, wall junctions, at junctions of rain water/CI waste water pipe junction including taking out possible quantities of roots entered in wall/slab surfaces and making good the surfaces including repairing the GI/CI/ACC/PVC pipe joints of that affected locations after applying herbal medicing making good to suit the adjoining surfaces shall be carried out using PCC (1:2:4) type 'B1' or cement mortar 1:2 with necessary scaffolding/staging etc upto a height of 7.00m from the ground level all as directed and as specified. |
| 91 | M&L for cutting down plants/trees of girth exc 10cm and n.exc 15 cm and applying ROUNDUP/GLYPOCET or equivalent (Herbal medicine) to roots of roof tops/sides, external walls of bldg chajjas, wall junctions at junctions of rain water/CI waste water pipe junction including taking out possible quantities of roots entered in wall/slab surfaces and making good the surfaces including repairing the GI/CI/ACC/PVC pipe joints of that affected locations after applying herbal medicing making good to suit the adjoining surfaces shall be carried out using PCC (1:2:4) type 'B1' or cement mortar 1:2 with necessary scaffolding/staging etc upto a height of 7.00m from the ground level all as directed and as specified. |
| 92 | S&F kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 900x750x200mm, duly assembled and fixed to wall with wall screws / fasterners all as specified and directed. |
| 93 | Supply & Fixing in repairs stainless steel Soap dish of any type fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engr-in-Charge |
| 94 | Demoltion of cement concrete (unreinforced) in ground floor and paving not exc 15cm thickness (below or above ground level) and removing the debris as directed. |
| 95 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, complete all as directed |
| 96 | M & L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in filling, foundation and mass concrete |
| 97 | M & L for brick work with old size Fly ash bricks in CM 1:4 straight or curved on plan exc 6 m mean radius |
| 98 | M&L brickwork with fly ash bricks , straight or curved on plan to any radius in half brick thick walls built in CM 1:4 |
| 99 | M& L for PCC 1:2:4 type B1 using 20mm graded aggregate as in coping and benching incl weathering slightly rounded or chamfered angles and throating as directed including form work all as directed. |
| 100 | M&L for Reinforced concrete pipesof 300mm dia bore of pipe, class NP3, laid and jointed complete with collars |
| 101 | M&L for Concrete bed to drain pipes of 300mm dia using PCC 1:4:8 Type D2 including packing under and completely surrounding pipes with concrete after they are laid and tested |
| 102 | M&L for Form work to soffit and sides of slabs supported on walls of flat rough finished surfaces of concrete |
| 103 | M&L for RCC (Nominal Mix) of Type B1 1:2:4 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed |
| 104 | M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-s or Fe-410-0 |
| 105 | Dismantling fencing fencing wire mesh any type |
| 106 | Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, including taking out embedded portion and making good disturbed ground |
| 107 | Material and labour PCC 1:3:6 type C2 (40mm graded aggregate) foundations, filling and mass concrete all as specified. |
| 108 | Fixing only chain link fencing in-cluding line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. |
| 109 | Supply only PVC coated chainlink fencing galvanised any size or type. |
| 110 | S&F Joist, channel, angle, or tee sections, fixed independently, withoutconnecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) and similar work conforming to Fe-290 Gde E-165 |
| 111 | Supply and fix 10mm dia MS round bars including welding with necessary lapping all as directedGde IS-432 (Part-I ) |
| 112 | Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long with diameter of shank 11 to 15mm all as specified |
| 113 | M&L two coat of synthetic enamel paint over a coat of red oxide primer to new steel surface including preparation of surfaces of any description over 10cm width or girth all as specified and as directed |
| 114 | M&L two coat of synthetic enamel paint over a coat of red oxide primer to new steel surface including preparation of surfaces of any description n.exc 10cm width or girth all as specified and as directed |
| 115 | Supply and Fix in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 116 | M&L for providing 100mm thick, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floors and pavings etc. all as specified and as directed |
| 117 | M&L Sand filling under floors or in foundations including wateringand consolidation |
| 118 | M&L machine pressed Pre cast rubber finished coloured PCC interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade of cement concrete of with grey cement and pigment all as specified and directed by Engr-in-Charge. |
| 119 | M&L chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment incl 15mm thick cement screed bed in CM 1:6 |
| 120 | M&L PCC 1:3:6 75mm thick C2 type (using 40mm graded aggregate) as in plinth protection/hard standing finishing cement concrete surface even and smooth without using extra cement. |
| 121 | Removing of drain cover slab of any size and replacing same after removing mud/silt etc including making good the damaged surfaces with PCC/plastering, all as directedNote:- Removal of Mud/silt will be measured and Paid Separately. |
| 122 | Removing accumulated silt/mud/vegitation of any kind inside the drain, scrapping, digging etc by any means manually and disposing the same at a level n.exc 1.50m above the starting point at a distance n.exc 1.0km and claening the surrounings of the drain complete all as specified and directed. |
| 123 | Demolition of reinforced cement concrete in any position and description(reinforcement to be cut as required to facilitate demolition) |
| 124 | M&L providing precast cement concrete type B1 (1:2:4) using 20 mm graded stone aggregte, as in man hole covers and set in cement mortar 1:6. Note :- Reinforcement shall be measured and paid seperatly. |
| 125 | M&L MS TMT bars 6mm to 8mm dia and over cut to length bent to shape required including cranking, bending spially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia. |
| 126 | M&L for providing 50 mm thick, PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in flooring all as specified and as directed |
| 127 | M&L for machine cut cudappah stone slab 20-25 mm thick over 20 mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 128 | M&L for preparation of new wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by the Engr-in- charge |
| 129 | Earth work in excavation by mechanical means (Hydraulic excavator)/in foundation trenches or drains (not exceeding 1.5 m in width or 10sqm on plan), including dressing of sides and ramming of bottom lift upto 1.5 m, including getting out excavated soil and disposal of surplus soil as directed with in a lead of 50 m. Hard and dense soil. |
| 130 | Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25cm with excavated soils all as specified. |
| 131 | Demolition of cement concrete in any position and in description not otherwise provided for |
| 132 | Demolition and breaking up 150 mm dia (salt glazed ware, AC or Reinforced concrete) piipe jointed in cement mortar and disposed off the premises all as directed. |
| 133 | Demolition and breaking up 200 mm dia (salt glazed ware, AC or Reinforced concrete) piipe jointed in cement mortar and disposed off the premises all as directed. |
| 134 | M&L PCC 1:3:6, type C2 (using 40mm grade stone aggregate) to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 150mm bore all as specified |
| 135 | M&L PCC 1:3:6, type C2 (using 40mm grade stone aggregate) to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, for 200mm bore all as specified |
| 136 | M&L reinforced concrete pipes 150mm bore, class NP2, laid and jointed complete with collars laid in trenches and jointed in CM 1:1 and tested as specified. |
| 137 | M&L reinforced concrete pipes 200mm bore, class NP2, laid and jointed complete with collars laid in trenches and jointed in CM 1:1 and tested as specified. |
| 138 | Extra for forming fair finished to drains or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. |
| 139 | Removing of sewage sludge from under ground sewage sump/septic tank and cleaning of any size and deep including cleaning of side walls, alround removal of accumulated sludges, silt, mud etc, and covering the same with earth, recommissioning septic tank including site clearance around 3 metre depositing outside camp area all as directed by Engineer-in-Charge. |
| 140 | Bailing out water from septic tank of any size & deep and cleaning inlet and outlet sewer lines including taking out the sewage water and carting away it from the defence area all as directed by Engr-in-charge. Note: Item No.21 & 22 Bailing sewage water to be taken out with proper tanker vehicle meant for the purpose with due care considering health hazards. |
| 141 | Cleaning of manholes by bailing out fluid and removing sediments, washing manhole floors and walls with wire brush taking out the excavated sludge, and carting away the same far away from buildings/living area and deposit at low lying area/ditches and cover with fresh earth on top complete all as specified and as directed by the Engineer-in-Charge. |
| 142 | Cleaning of manholes of depth not exceeding 1.00mtr by bailing out fluid and removing sediments, washing manhole floors and walls with wire brush taking out the excavated sludge, and carting away the same far away from buildings/living area and deposit at low lying area/ditches and cover with fresh earth on top complete all as specified and as directed by the Engineer-in-Charge. |
| 143 | Cleaning of manholes of depth not exceeding 1.00mtr and not exceeding 2.00mtr by bailing out fluid and removing sediments, washing manhole floors and walls with wire brush taking out the excavated sludge, and carting away the same far away from buildings/living area and deposit at low lying area/ditches and cover with fresh earth on top complete all as specified and as directed by the Engineer-in-Charge. |
| 144 | Cleaning the existing SGSW/CI/SWR/RCC sewage pipe line by roding manually or mechanically and removing all sludge and foreign matters completely and neatly from the pipe line and making serviceable for free flow of sewage in 100mm dia of pipe all as specified and directed |
| 145 | All as per Sl.item No 144 here in before but 150 mm bore of pipe |
| 146 | All as per S. item No 144 here in before but 200 mm bore of pipe |
| 147 | Cleaning and removing individual blockages in IWC/EWC by manually or mechanically and removing all sludge and foreign matters completely, neatly and making serviceable for free flow all as specified and directed |
| 148 | Cleaning and removing individual blockages from nahani trap/ floor trap/ gully traps in Bath rooms/Kitchen etc. by manually and removing all sludge and foreign matters completely, neatly and making serviceable for free flow and placing the covers/ gratings in position all as specified and directed |
| 149 | Pumping out sewage/rainwater from septic tank/soak wells/manholes/drains etc by mechanically and disposing the same in pits where directed including necessary excavation refill and disposal of surplus soil etc complete, placing the covers intact, all as directed by engr-in-charge. Please Enable Macros to View BoQ information |
| 150 | Pumping out sewage/rainwater from septic tank/soak wells/manholes/drains etc by mechanically and disposing the same in pits where directed including necessary excavation refill and disposal of surplus soil etc complete, placing the covers intact, all as directed by engr-in-charge. Please Enable Macros to View BoQ information |
