|
| 1 | Stripping off worn out plaster and raking out joints ……….. lead of 75m as directed.[Page No-11 Item No. 10] |
| 2 | Cleaning the Concrete surface by removing dirt and debris marking defective locations …………… of theEngineer- in-Charge. [ Page No-45 Item No. 5 ] |
| 3 | Cleaning the exposed reinforcement preferably upto fulldiameter ……………..as per manufacture specification.[Page No- 45 Item no-6 ] |
| 4 | ReInforcement for reinforced concrete work in all sorts ofstructures including distribution bars, stirrups binders etc…………..as per drawing and direction.(a) For works in foundation,basement and upto roof of ground fioor /upto 4 m(i0 Tor steel / Mild steel[ Page No-43 to 44 Item No-40 (a) (i)] |
| 5 | Weiding in M.S structural work with gas or electric.(a) Tack weld [ Page No-81 Item No-31 (a) (b)] |
| 6 | (b) Continuous weld[ Page No-81 Item No-31 (a) (b)] |
| 7 | Applying epoxy based reactive joining agentfor joining the old concrete with fresh concrete ………….……… specified time as per manufacturersspecification. (0.4 Kg / m² of concrete surface).[ Page No-45 Item No-7 ] |
| 8 | Cement concrete ( 1:1.5:3 ) with graded stone chips 6 mm… the Engineer -in -Charge.(b) 25 mm thick[ Page No-40 Item No-27 (b) ] |
| 9 | (c) 37.5 mm thick[ Page No-40 Item No-27 (b) ] |
| 10 | Applying two coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion.[ Page No-45 Item No-8 ] |
| 11 | Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemicalemulsion by admixing chloropyrofos emulsifiableconcentrates (1% concentration) with water by weight at the rate of 5 liters per sq.m of the surface ……….…as per specification described in para 6.4 code IS-6313 (part-II)[ Page No-6 Item No-10 (c)] |
| 12 | Plaster (to wall ,floor, ceiling etc.) with sand cement….where necessary (ground floor)(i) with 1:4 cement mortar(a) 20 mm thick plaster [ Page No-189 Item No-1 (i) (b) ] |
| 13 | (a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc …… smoothening surfaces by sand papering etc.[Page No. 200 Item No. 1 (b)(a)] |
| 14 | (b) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc .……… smoothening surfaces by sand papering etc. [Page No. 200 Item No. 1 (b)(a)] |
| 15 | Painting Best Qlty. syanthetic enamel paint of approved Qlty ……… if necessary.(a) On timber or Plaster Surface.Two Coats.[Page No. 200 Item No. 2(a) (b)] |
| 16 | (b) On steel or other metal Surface.Two Coats[Page No. 200 Item No. 2(a) (b)] |
| 17 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface or new surface to…………..of the EIC. ( In Ground Floor ) One Coat(i) Water based interior grade Acrylic Primer[ Page No- 195, Item No- 7 (a)] |
| 18 | Acrylic Emulsion Paint of approved make and brand onwalls and ceiling ………… including putty. (two coats)(i) Standard Quality[ Page- 196, Item No-10 ] |
| 19 | Supply of Mazdoor (male).[ Page No-303 Item No-3 ] |
| 20 | Supplying Carpenter (Head) for door repairing[ Page No-303 Item No-5 ] |
| 21 | Supplying Carpenter (Helper) for door repairing[ Page No-303 Item No-7 ] |
| 22 | Removal of rubbish,earth etc. from the working site …. & cleaning the site in all respect as per direction of EIC.[Page No-12 Item No-13] |
| 23 | Supply of santras for floor chipping.[ Page No-303 Item No- 13 ] |
| 24 | (b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5 mm thick)[ Page No-204 Item No-5 (b) ] |
| 25 | Making one set of scaffolding only for replacing glasspanels, painting, uprooting plant …………… of the Engineer-in-charge.(a) 3.90 metre hight[ Page No-23 to 24 Item No-3(a)] |
| 26 | Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm x600 mm x10 mm thick) …… direction of Engineerin-charge.(II) With polymerised Adhesive [6 mm thick ] & epoxygrouting materials for filling joints including spacer-2 mm(A) Deep colour & White[ Page No-66 Item No-36 (II) (B) ] |
| 27 | S.F.& F in position 10-15 micron anodised (mat finishIS -1855-199) heavy duty aluminium door & window for any floor.(a) Openable Portion Analysis Rate. Ref Tender No. C-61 /11-12 |
| 28 | (b) Fixed PortionAnalysis Rate. Ref Tender No. C-61 /11-12 |
| 29 | Supplying, fitting and fixing boiling water resistant plyconforming to IS: 303-1989 bonded with phenol formaldhydesysthetic resin of approved make and brand fitted andfixed ………… direction of Engineer-in-Charge.(iii) 6 mm[ Page No-205 Item No-1 (ii) ] |
| 30 | Supplying fitting,fixing decorative lamination conformingto IS: 2046 : 1995 as per approved make, brand ………..… as per direction of Engineer-in-Charge.(i) Thickness of laminate 1.5 mm[Page No- 179 Item No-14 (i) ] |
| 31 | Wood work in posts, post plates, rafters, battens truss members, purlins etc. fitted and fixed complete.(ii) Sal: Local[Page No- 135 Item No-1 (ii) ] |
| 32 | Iron butt hinges of approved quality fitted and fixed withsteel screws, with ISI mark.(vi) 100 mm x 50 mm x 1.25 mm[ Page No-140 Item No-5 (vi) ] |
| 33 | Anodised aluminium barrel / tower / socket bolt ……… with cadmium plated screws.(iv) 150 mm long x 10 mm dia. bolt.[ Page No-140 Item No-5 (vi) ] |
| 34 | M.S. work in brackets made from flats angles, tees etc .… nuts, washer or screws etc.[ Page No-103 Item No-8] |
| 35 | (a) M.S or W.I Ornamental grill of approved design jointscontinuously welded with M.S, W.I Flats ………………..……… In ground floor.(a) Grill weighing above 10 Kg./sq.m and up to 16 Kg/sqm[ Page No-104 Item No-13 (i) ] Please Enable Macros to View BoQ information |
