|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRIS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. |
| 2 | Wiring for light/ power plug with 282 sq. mm FRIS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 xg. mm FRES PVC insulated copper conductor single core cable for loop earthing as required. |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRIS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. |
| 4 | Supplying and drawing following sizes of FRES PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required. |
| 5 | Supplying and fixing of following sizes of medium classPVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 6 | Supplying and fixing following modular switch/ socket on the existing modular plate de switch box including connections but excluding modular plate etc. as required. |
| 7 | 5/6 A Switch |
| 8 | 3 pin 5/6 A Socket Outlet |
| 9 | 15/16 Amp Switch |
| 10 | 6 Pin 15/16 Socket Outlet |
| 11 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as reruired. |
| 12 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 13 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 14 | Supplying & fixing of following way single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess complete with tinned copper busbar neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. |
| 15 | 6 way (Double door) SPN type |
| 16 | Supplying and fixing 5 A to 32 A rating, 240/415 V. 10 kA. \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 17 | Single Pole |
| 18 | Single Pole and neutral 63 amp |
| 19 | Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable: & Carry BIS licensing (i.e. ISl marking) with down rod up to 80 cm with secondary support safety cable (steel rope), cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.1200mm Sweep BEE 3 Star rated (service value >-5,0 to.< (5.5) 1200mm Sweep BEE 3 Star rated (service value >-5,0to.< (5.5) |
| 20 | Providing & Fixing of IP20 SMD Mid PowerLED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver, System lumen efficacy ≥ 110 Im/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. p ≥0.95, CRI >80, life time of minimum 50000 Burning Hours with, 70% of intial Lumen maintaned till life ends, CCT 3000°K/4000°K/ 5700°K / 6000°K (As per ANSI Bin), Maximum power consumption should not more thanthe specified rating and Fixture shall be of BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embosing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LMS80 ) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge20/22 watt LED 4 feet with min. lumen output (2000- 2200) |
| 21 | Supplying and Fixing of 16 sq. mm twin core aluminium cable all along the wall surfaceunarmoured. Please Enable Macros to View BoQ information |
