|
| 1 | Providing manual assistance for attending petty day-to-day maintenance services related to Plumbing / Carpentary/ Masonary as & when required i/c all required T&P and scaffolding etc. (Note: Minimum time shall be reckoned as half day even . |
| 2 | a) skilled manual assistance |
| 3 | b) un skilled manual assistance |
| 4 | Removing blockage of floor trap, WC trap, RW pipe and sanitary pipes etc.including cleaning of pipes/ traps and disposal of garbage found to the nearest sewage dump etc complete. (Note: Rate includes the cost of necessary t&p, bamboo, rubber choke, etc.) |
| 5 | Cleaning of silt, saplings, fungi, dust from the roof top PVC/ RCC water tanks i/c its disposal outside compound, washing tanks with lime water and treating with potassium permanganate or bleaching powder etc. all complete as per direction of Engineer-in-charge. |
| 6 | a) Capacity of tank upto 500 litres. |
| 7 | Cleaning of sewer line including manholes in the compound by complete removal of earth, silt, sludge, brick bats, garbages etc and disposing off the same outside the compound at the authorized municipal dump complete as per the direction of the Engineer-in-Charge. |
| 8 | a) Sewer manholes of all sizes and depth. |
| 9 | Uprooting & removal of wild growth of vegetation by spraying suitable herbicides like glyphosate products / or manually i/c repairing damaged wall surface if any , from terrace, walls, drainage system, water supply system or at any location of the building as directed by the Engineer-in-charge.(one wild growth shall be considered as one job) |
| 10 | Providing and fixing PVC cover of approved make having proper locking arrangement over PVC water storage tank of capacity 250 to 500 ltr. capacity. |
| 11 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 12 | a) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 14 | a) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | Providing and fixing white vitreous china water closet squatting pan (Indian type) |
| 16 | a) Orissa pattern W.C. pan of size 580x440 mm |
| 17 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 18 | a) 10 litre capacity - White |
| 19 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 20 | a) Black solid plastic seat with lid |
| 21 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 22 | a) Flat back wash basin of size 550x400 mm. |
| 23 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 24 | Providing and fixing c.p. brass towell rail of approved quality Number i.c screws complete as directed (i) 600mm long. |
| 25 | Providing and fixing stainless steel jali (grating) with or without hole for waste pipe for floor/Nahani trap. |
| 26 | a) 100 mm dia. weight not less than 100 gms |
| 27 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 28 | a) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 29 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 30 | (i)Single socketed pipes. |
| 31 | 75 mm diameter |
| 32 | 110 mm diameter |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 34 | a) 15 mm nominal outer dia. Pipes. |
| 35 | b) 20 mm nominal outer dia. Pipes. |
| 36 | c) 25 mm nominal outer dia .Pipes. |
| 37 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 38 | a) 45 cm length |
| 39 | i) 15 mm nominal bore |
| 40 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 41 | a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 42 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 43 | a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 44 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 45 | a) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 46 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 47 | a) 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 48 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. |
| 49 | a) 25mm nominal bore. Weighing not less than 62 gms. |
| 50 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 51 | Providing and fixing cpvc gate valve 25mm nominal size all complete as per direction of E-in-C |
| 52 | Providing and fixing P.V.C. handles /lever in PVC Cistern complete as required . |
| 53 | Repairing of the following i/c other fittings of C.P. brass etc. as per direction of Engineer-in-charge. |
| 54 | a) Bib cock |
| 55 | b) Pillar cock |
| 56 | c) Stop cock |
| 57 | d) Low level cistern i/c required integral fittings/ fixtures. |
| 58 | Repairing of leaking toilet joint with P trap and floor traps. |
| 59 | Repairing of leakage in main and branch water pipe lines of 15 mm to 25 mm as and when required i/c the cost of jointing material such as Teflon tape, jute,tee,elbow,socket etc. required for sealing of leakage joints. Pipe & union, if required to be replaced, shall be paid separately. |
| 60 | Providing and fixing C.P.brass waste coupling for wash basin / sink of approved quality |
| 61 | a) 32mm nominal size. |
| 62 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 63 | a) Flexible pipe |
| 64 | i) 32 mm dia |
| 65 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 66 | a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 67 | Deduct for not providing hinges in doors, windows or clerestory window shutters with : |
| 68 | a) ISI marked Stainless steel butt hinges with stainless steel screws : |
| 69 | (i) For 2nd class teak wood and other class of wood shutters |
| 70 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 71 | a) Float glass panes of thickness 4 mm. |
| 72 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. |
| 73 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 74 | a) Twin rubber stopper |
| 75 | Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gauze with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm. |
| 76 | Repairing of aluminium door shutters (single or double leaf) including taking out door shutter from position, repairing and tightening of all members including new aluminium cleats, pivots and screws wherever required and refixing in position all complete but excluding the cost of new floor spring or door closer required. |
| 77 | Arranging electric welding machine at site for repairing works etc. with necessary cables and other T&P including the cost of operator and electrodes but excluding the cost of necessary steel sections complete as per direction of Engineer-in-charge. (Note: One day work at one site shall be taken as one job.) |
| 78 | Credit to work the old unserviceable Brass/CP Brass Bib Cock, Stop cock, Pillar Cock Gate Valve and other fittings etc. |
| 79 | Credit to work old damaged PVC. sanitary/water supply fittings. |
| 80 | Credit to work old rusted (unserviceable) C.I./S.C.I. Pipes and fittings, Mild Steel/ Steel Sections, G.I./M.S. Pipes etc. |
| 81 | Credit to work old damaged PVC. Storage Tank Please Enable Macros to View BoQ information |
