|
| 1 | Scrapping out old paints from wall with scrapper, sand papering, washing with soap or soda water including scaffolding charges etc. complete in all respect as per specification & direction of Engineer-in-Charge. (upto 5.00mtr height) |
| 2 | Dismantling & removing old damaged lime or cement plaster from walls including racking out joints and removing the debris away from work site within 50m. lead etc. complete as per direction of the Engineer-in-charge. (Ground floor to 3rd floor) |
| 3 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. (i)Ground floor |
| 4 | (ii)First floor |
| 5 | (iii)Second floor |
| 6 | (iv)Third floor |
| 7 | (v)Head room (4th floor) |
| 8 | Painting two coats with fungal resistance weather seal coat of approved shade over a coat of primer by means of brush to out side surface of walls after cleaning the surface including watering, curing etc complete in all floors including cost, conveyance, taxes of all materials, labours, sundries, T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge. (i)Ground floor |
| 9 | (ii)First floor |
| 10 | (iii)Second floor |
| 11 | (iv)Third floor |
| 12 | (v)Head room (4th floor) |
| 13 | Painting two coats with approved synthetic enamel paints of approved colour, shade to old/new wood & iron work over a coat of wood/ red oxide primer including cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. (i)Ground floor |
| 14 | (ii)First floor |
| 15 | (iii)Second floor |
| 16 | (iv)Third floor |
| 17 | Supplying, fitting & fixing of 6” Dia P.V.C Rain Water down Pipes including cost, conveyances, taxes of all Materials, cost of all labour & T&P etc. required for the work etc. complete in all respect as per specification & direction of the Engineer-in-charge. |
| 18 | Dismantling & removing 2.5cm thick grading concrete from roof slab and cleaning the surface and removing the debris away from worksite, stacking the useful materials for re-use including cost of all labour, T&P required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 19 | 25mm thick grading concrete (1:2:4) with welded mesh (50mm X 25mm X 13Gauge) using 12mm & 6mm size black hard crusher broken granite stone chips of approved quality & from approved quarry after cleaning the surface and laying in proper slope and level including compacting, watering and curing, cost, conveyance, royalty & taxes of all materials, cost of all labour, T&P etc. complete in all respect as per direction of Engineer-in-charge. |
| 20 | R.C.C work of M-20 Grade having a minimum compressive strength (in work test) 200kg/sqcm in 15cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS516 using 20mm down graded size black hard crusher broken granite stone chips as per the design mix of approved quality and from approved quarry including hoisting, lowering, laying and compaction by using vibrators, watering, curing for 28days, centering, shuttering and finishing the exposed surface smooth, providing grooves or beads where necessary including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS Rod or tor steel and binding wires & labour charges for bending binding and tying the grills etc. as per specification and direction of the Engineer-in-Charge. Chajja |
| 21 | Cutting, straightening coiled or bent up M.S. Rod or tor steel (TATA/ SAIL/Vizag/ Zindal etc)including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge |
| 22 | Carriage of surplus Earth/ Debris by Mechanical Means upto 5KM. Lead including Cost of all Labour for Loading & Unloading Charges, Transportation and spreading in layers at the dumping area etc. Complete as per specification & direction of Engineering-in-charge. |
| 23 | Supplying, fitting & fixing of 5mm thick plain glass of approved quality & colour including fixing the same in position with required hardware & putty with cost, conveyances, taxes of materials, cost of labour, T&P etc. complete in all respect as per specification and direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
