|
| 1 | Supplying Installation Testing and Commissioning of 2MP Fixed Lens IP IR Outdoor Bullet Camera having followingspcifications and features etc :- 2MP @ 25/30fps@1080P (1920×1080) Outdoor Bullet Camerawith 2.8/ 3.6mm fixed lens1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50dB,Camera should display Camera title, Date & Time in live &recorded video2)Image Sensor: 1/2.8\\" or better progressive Scan CMOS toget color image even at night condition(Minimum Illumination:0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day &Night High Performance Mechanical IR cut filter with autoswitch, Integrated IR Source (Auto, Manual)- Inbuilt Smart IRLED's with effective distance upto 50 meter or better and 30meter for colour view in night, Imaging: 1/3s to 1/30000selectronic shutter support, Auto Gain Control , White Balance-Auto, Back Light Compensation, Multi zone Privacy Masking,HLC, Digital Watermarking.3) Compression (Minimum):-Video:- H.265 or better, H.264H,H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.7234) Wide Dynamic Range:- WDR (120db or more)5) Digital Noise Reduction:- DNR (3D) On/Off6) Video Streaming & Frame Rates :- Triple streaming ,configurable(Main stream: 2MP (1920 × 1080)@25/30 fps Sub streamsminimum: 720P@25/30 fps). |
| 2 | 7) Image Setting: Rotate Mode, saturation, brightness,contrast, sharpness adjustable through client software or webbrowser, Edge Analytics: Tripwire, Intrusion, Motion Detection8) Cyber Security: AES 256-bit Encryption, Configurationencryption, trusted execution, Digest, security logs, accountlockout, syslog, video encryption, IP/MAC filtering, HTTPS,trusted upgrade, trusted boot.9) Onboard Storage: Camera should support built-in MicroSD/SDHC/SDXC Card slot upto 512 GB. It should be suppliedwith minimum 128GB memory Card.10) Recording Management: Format SD, overwrite, storagemanagement, video to NAS device,11) Alarm Trigger : Motion/tampering detection; audiodetection; network disconnection detection; IP conflictdetection; memory card state detection; memory spacedetection12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP,RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP,ICMP, SSL, DHCP, SMTP, RTSPS, unicast,13) System Capability: ONVIF, Camera shall support opensource VMS |
| 3 | 14) Ethernet: 1 RJ 45 10/100 Ethernet port15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/Out for External Mic. and Speakers as per site requirement.16) Power Input: The camera should support simultaneous dualpower input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in onepower source.17) Power Requirement: 12VDC/24 VAC/PoE (802.3af)/ePoE18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallicbody19) Operating Condition:- Ambient Temperature:- (-)05°C to50°C, humidity 95% (max) (non-condensing)20) IR life: 40000 hours or higher21) Video Bit rate: 32 KBPS - 8 MBPS or better22) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS |
| 4 | SITC OF 1 IP video input 4-ch 2 Incoming bandwidth 40 Mbps 3 Outgoing bandwidth 80 Mbps 4 \\"HDMI output resolution\\" 4K - 4096 x 2160, 2K - 2560 x 1440, 1920 × 1080, 1280 × 1024 , 1280 × 720 5 \\"VGA output resolution\\" 1920 × 1080, 1280 × 1024, 1280 × 720 6 Video output mode HDMI/VGA simultaneous output 7 Decoding format H.265, H.265+ 8 Recording resolution 8 MP/ 4 MP/3 MP/1080p/720p 9 Network protocols TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, SMTP 10 SATA 1 SATA interfaces 11 Capacity Up to 8TB capacity for each HDD 12 Two-way audio 1-ch, RCA 13 Network interface 1 RJ-45 10/100/1000 Mbps selfadaptive Ethernet interface 14 USB interface 2 × USB 2.0 15 Power supply 12 VDC 16 Working temperature -10 to +55° C 17 Certification BIS, CE, FCC Makes; Matrix, Honeywell Prama, CP Plus ,Dahua. There should be a on site warranty for 1 years.The work should be executed as per Enginner in charge |
| 5 | Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knockeddown condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power istribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. The work should be executed as per Enginner in charge 6U Rack |
| 6 | Supplying, Installation, Testing and Commissioning following 2TB (Terabytes) capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications..The work should be executed as per Enginner in charge |
| 7 | SITC OF poe 4 port giga poe switch Operating Temperature -20 to 55 deg C Operating Humidity 5 - 95% RH Forwarding Capacity 0.86 Mpps Bandwidth 1.2 Gbps Model ESCN04POE2U Additional Details PoE Port: 4x10/100 Mbps Standard IEC61000-4- 2 Storage Temperature -40 to 70 deg C Model No.: D LINK TP LINK DYNAMIC The work should be executed as per Enginner in charge |
| 8 | Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non-Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE 802.3an, RoHS. Delay Skew should be < 45NS. The outer Cable Diameter should be 7.5 + 2 mm. Cable should have been tested and verified by UL/ ETL etc. complete as required.).1 Run of cable.The cable to be approved from the Engineer in Charge. |
| 9 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor,single core cable in the existing surface/ recessed steel/ PVC conduit as required. The work shall be executed to the entire satisfaction of Engineer-in-charge. 3X1.5 Sqm |
| 10 | Supply and Erection of Angle Iron of bracket of 3' long made out of Angle Iron of size 35x35x6 & fixed on top of G.I. pipe (0.5m) long 4\\" dia angle to support the bracket complete in all respect with suitable clump and nuts/bolts to the entire satisfaction of the Engineer-in-charge. |
| 11 | SITC OF PROTECTION BOX FOR CCTV CAMERA SECURE FIRE PVC Square Junction Box for CCTV Camera Mounting 4X4,White Model No.: ISI The work shall be executed to the entire satisfaction of Engineer-in-charge. |
| 12 | Providing and fixing of marble name plate of size 36\\"x24\\" inch for indication and identification of MPLAD work and including floral decoration of marble name plate. The work shall be executed to the entire satisfaction of Engineer-in-charge. |
| 13 | Earth work in excavation by Mechanical means (Hydraulic excavator) manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and remming of bottoms,lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within lead of 50m. All kinds of soil (DSR 2.8.1-2.36) |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size DSR 4.1.10 |
| 15 | Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1) |
| 16 | 15mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) to the entire satisfaction of Engineer-in-Charge. (DSR 13.5.1) |
| 17 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) Flush/ Ruled/ Struck or weathered pointing to the entire satisfaction of Engineer-in-Charge. (DSR 13.31.1) |
| 18 | Finishing walls with acrylic Smooth exterior paint of required shade:- New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 Kg/ 10 sqm. (DSR 13.46.1) Please Enable Macros to View BoQ information |