|
| 1 | Dismantling of Brick work or Stone work in lime or cement mortor including stacking of seviceable material within 60 metres lead as per direction of Engineer-in-charge (SI.- 692)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 2 | Dismantling of RCC or R.B. work including stacking of seviceable material within 60 metres lead as per direction of Engineer-in-charge (SI.- 694)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 3 | Brick masonry with Class-150 bricks in 1:4 cement and coarse sand mortar in super structure including supply of all material, labour and T&P etc. required for proper completion of work as per direction of Engineer-in-charge (SI.- 305A&309)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 4 | M.S. Reinforcement in RCC work including bending in proper shape, placing and binding with binding wire including supply of steel, its wastage, cost of binding wire etc. complete. Authorised overlaps shall be measured extra as per direction of Engineer-in-charge (SI.- 504)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 5 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars all complete. fixed to opening/ windows by rawl plugs/screws as per direction of Engineer-in-charge (SI.- 9.48.2).(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 6 | RCC work with cement, coarse sand and 20 mm stone aggregate in proportion of 1:1.5:3 in foundation, columns and lintels including necessary shuttering etc. complete with all materials, labour, T&P etc. complete required for proper completion of work as per direction of Engineer-in-charge (SI.- 283)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 7 | Repairs to plaster of thickness 12 mm to 20 mm with cement mortar 1:4 (1cement: 4 coarse sand) in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints, preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (DSR No. 14.1.2)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 8 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete.as per DSR No.13.88(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 9 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacture on plastered surface to prepre the surface even and smooth complete as per direction of Engineer-in-Charge. (DSR No. 13.80).(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 10 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour on old surface (two coats) as per direction of Engineer-in-Charge. (DSR No. 13.81).(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 11 | Finishing walls with acrylic smooth exterior paint of required shade (two coats) applied @ 1.67 ltr/ 10 sqm, on existing cement paint surface as per direction of Engineer-in-Charge. (DSR No. 13.111.1).(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 12 | Removing paint or warnish with paint remover or caustic soda including cost of all material, labour and T&P etc. required for proper completion of work as per direction of Engineer-in-charge (SI.- 657)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 13 | Painting two coats over one coat of primer paints with super synthetic enamel paints including material labour T&P etc .complete as per direction of Engineer-in-Charge. (DSR No. 13.99.1).(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 14 | Cement concrete with 40 mm stone ballast, coarse sand and cement in proportion- 1:4:8, including supply of all materials, labour, T&P etc. required for proper completion of work as per direction of Engineer-in-charge (SI.- 281)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 15 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with 2nd class teak wood beading 62X19 mm and wire of dia. 0.50 mm all complete.as per DSR No. 9.135.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 16 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes as per DSR No.10.30.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 17 | Providing & fixing ISI mark flush door shutters confirming to IS:2202(Part-I), non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including ISI mark hings and screws etc. complete as per DSR No. 9.21.2(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 18 | Providing and fixing Ist quality ceramic floor tiles conforming to IS: 15622 of approved make colours and shades laid over 20 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. as per DSR 11.37(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 19 | Providing and laying vitrified tiles in floor in different sizes (lhickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cemenl: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. DSR 11.41A.3.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. as per DSR 8.31(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 21 | Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate) finished with floating coat of neat cement including cement slurry 40 mm thick complete as per DSR No. 11.3(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 22 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests as per DSR No.17.1.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 23 | Providing and fixing floor mounted white vitreous china single piece double taps syphonic water closet of approved brand/ make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing cistern with all fittings and fixtures with seat cover, cistern, fitting, nuts, bolts and gaskets etc. complete including making connection good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid as per DSR No.17.2.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 24 | Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per DSR No.17.31(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 25 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge as per DSR No.17.16A(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 26 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer as per DSR No.17.7A(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 27 | Providing and fixing Stainless Steel A, ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x510 mm bowl depth 200 mm as per DSR No.17.10.2.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 28 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete 32mm dia as per DSR No.17.28.2.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 29 | Providing and fixing uplasticised PVC connection pipe 45 cm long with brass unions 15 mm nominal bore as per DSR No.18.21.2.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 30 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15mm nominal bore as per DSR No.18.49.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 31 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15mm nominal bore as per DSR No.18.51.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 32 | Providing and fixing C.P. brass angle valve for basin mixture and geyser points of approved quality conforming to IS:8931, 15 mm nominal bore as per DSR No.18.53.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 33 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.as per DSR No.17.73.2(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 34 | Providing and fixing PTMT grating of approved quality and colour circular type 100 mm dia as per DSR No.18.58.1.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia Pipes as per DSR No.18.8.2(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 36 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc, 25 mm nominal outer dia Pipes as per DSR No.18.8.3(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 37 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.as per DSR No.18.48(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 38 | Providing, fixing and jointing of PVC Multi Floor Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge.110mm x 75mm x 50mm/40mm (Toilet)as per NSA(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 39 | Providing, fixing, jointing and testing , of PVC Nahani Trap without jali of minimum 50 mm water seal, making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge.110mm x 75mm (Toilet & Kitchen) as per NSA(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 40 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.as per DSR No. 14.76(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 41 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 110 mm dia as per DSR 12.41.2(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 42 | Providing and fixing unplasticised PVC clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing with cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete, 110 mm dia as per DSR 12.43.2(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 43 | Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Shoe 110 mm as per DSR 12.42.6.2(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 44 | Providing and fixing Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (40 mm & above)x (40 mm & above) & sash (25 mm & above)x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre)and Providing and fixing 5.5 mm thick glass panes in steel doors,windows, clerestory windows, all complete as per D.S.R. No. 9.147.A1.1+10.30.2.(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 45 | Providing and fixing Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (40 mm & above)x (40 mm & above) & sash (25 mm & above)x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre) as per D.S.R. No. 9.147.A1.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 46 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with lSi, lS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door widthfrom 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. as per D.S.R. No. 9.84(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 47 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.as per D.S.R. No. 14.34(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 48 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : (a) 250 mm x 10mm as per D.S.R. No. 9.97.2(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 49 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (a) 250mm x 16mm. as per D.S.R. No. 9.96.2(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 50 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mmas per D.S.R. No. 9.100.1(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.)(all Aspects(Rates are excluding G.S.T. but Including All Taxes Royalty, Labour cess, Materials & T.&P.) |
| 51 | GST will be paid as per Govt Rule Please Enable Macros to View BoQ information |
