|
| 1 | For EDD Chandausi and Sambhal |
| 2 | Safe carriage of the following Centralised material from Store Centre to site /JE store with loading & unloading at both ends respectively. |
| 3 | 11 KV Disc fitting |
| 4 | 11 KV Disc Insulator T&C type 4500kg. |
| 5 | 11 KV fuse Set |
| 6 | 11 KV Pin insulator (Polymeric) |
| 7 | 11 KV Pin with Nut(Polymeric) |
| 8 | MS Top channel (100x50x2240mm) |
| 9 | MS T-off Chennal (125 x 65 x 1300 mm) |
| 10 | Dropper Channel (100 x 50 x 2000mm) |
| 11 | MS Channel ( 100 x 50 x 1800) |
| 12 | MS Channel ( 75 x 75 x 6 x 202 8nmm with Clamp & Bolt) |
| 13 | 11 KV TPMO |
| 14 | 11/0.4 KV T/F 63 KVA |
| 15 | 11/0.4 KV T/F 100 KVA |
| 16 | 11/0.4 KV T/F 250 KVA |
| 17 | ABC CABLE 3*120+1*95+1*16MM SQ. (5% SAG+ 1 %CONNECTION) |
| 18 | AB Conductor 3*95+1*70+1*16 sqmm |
| 19 | ACSR Dog Conductore |
| 20 | ACSR WESAL INSULATED Conductor 11 KV |
| 21 | DISTRIBUTION BOX COMPLETE |
| 22 | Earthing of pole by MS earthing rod of 20x2500mm & 6 SWG Earthing wire Etc |
| 23 | LT XLPE Cable Al 1x400 sq mm |
| 24 | STP pole 11 Mtr Long |
| 25 | PCC 11 Mtr Long |
| 26 | PCC Poles 8.5 Mtr. Long |
| 27 | Stay set Complete 16x1800 |
| 28 | Stay Wire 7/8 swg |
| 29 | Proper Installation/Fabrication/laying/fixing/binding etc. of the Following Material With All the Accessories (as per resspo norms) |
| 30 | 11 KV Disc fitting |
| 31 | 11 KV Disc Insulator T&C type 4500kg. |
| 32 | 11 KV fuse Set |
| 33 | 11 KV Pin insulator (Polymeric) |
| 34 | 11 KV Pin with Nut(Polymeric) |
| 35 | MS Top channel (100x50x2240mm) |
| 36 | MS T-off Chennal (125 x 65 x 1300 mm) |
| 37 | Dropper Channel (100 x 50 x 2000mm) |
| 38 | MS Channel ( 100 x 50 x 1800) |
| 39 | MS Channel ( 75 x 75 x 6 x 202 8nmm with Clamp & Bolt) |
| 40 | 11 KV TPMO |
| 41 | 11/0.4 KV T/F 63 KVA |
| 42 | 11/0.4 KV T/F 100 KVA |
| 43 | 11/0.4 KV T/F 250 KVA |
| 44 | ABC CABLE 3*120+1*95+1*16MM SQ. (5% SAG+ 1 %CONNECTION) |
| 45 | AB Conductor 3*95+1*70+1*16 sqmm |
| 46 | ACSR Dog Conductore |
| 47 | ACSR WESAL INSULATED Conductor 11 KV |
| 48 | DISTRIBUTION BOX COMPLETE |
| 49 | Earthing of pole by MS earthing rod of 20x2500mm & 6 SWG Earthing wire Etc |
| 50 | LT XLPE Cable Al 1x400 sq mm |
| 51 | STP pole 11 Mtr Long |
| 52 | PCC 11 Mtr Long |
| 53 | PCC Poles 8.5 Mtr. Long |
| 54 | Stay set Complete 16x1800 |
| 55 | Stay Wire 7/8 swg |
| 56 | Provinding And Installation/Fixing of the Following Decentralised Material With All the Accessories (as per resspo norms) |
| 57 | ABC SUSPENSION CLAMPS WITH I-HOOK |
| 58 | Al Leg long barrel off size (LS) |
| 59 | Barbed wire G.I including jumper |
| 60 | Clamps for LT T-off with bolts & Nuts |
| 61 | Concreting of poles |
| 62 | Concreting of Stay |
| 63 | HT Lead 1x50 sqmm |
| 64 | COST OF EARTHING FOR G.I. PIPE BORE EARTHING 100 FEET DEEP CLAMP DIA 40 MM INCLUDING ACCESSORIES & FITTING FOR T/F ONE NO NEUTRAL ONE NO BODY. AS PER STANDARD |
| 65 | Danger baord , clamps with bolts & Nut |
| 66 | DEAD END CLAMP WITH I-HOOK |
| 67 | Fancing |
| 68 | PG CLAMP WEASEL TO WEASEL |
| 69 | MS CLAMP FOR ST POLE |
| 70 | J-HOOK |
| 71 | Henley Type Tailless Unit Protection Cubical Panel 500 A, 650 V for 250 kVA DT |
| 72 | Holding clamps for top channel TPMO & fuse set etc. with bolts & nuts |
| 73 | LT Fuse Set Protection Unit For 100 Kva Dt With Smc Box |
| 74 | LT PVC Cable 3.5x150/70 sq mm |
| 75 | MS angle 75x75x6x2028mm with clamp & bolt and nut (T/F base) |
| 76 | MS Channel (Dropper) 100x50x2028mm (for fuse set) |
| 77 | MS Channel 125x65x1300mm (T-off) |
| 78 | MS Top channel (125x65x2240mm) |
| 79 | PIERCING CLAMP |
| 80 | Plinth for size 2x2x1.5M |
| 81 | LT Distribution box |
| 82 | LT piercing connector 95 sqmm |
| 83 | Stone pad 300x300x75mm Please Enable Macros to View BoQ information |
