|
| 1 | Dismantling clearing away and carefully stacking materials useful for reuse of Pressed Tiles and Weathering Course without affecting the adjacent structures |
| 2 | Dismantling clearing away and carefully stacking materials useful for reuse of Reinforced Cement Concrete |
| 3 | Dismantling clearing away and carefully stacking materials useful for reuse of brick masonry in Cement mortar walls without affecting the adjacent structuresa) Brick Masonry in Cement Mortar walls under 3.00m Height |
| 4 | Clean removal of Cement plaster from the old wall and without affecting the adjacent structures |
| 5 | Removing the damaged existing floor finish & dadooing walls in cement mortar with Mosaic tiles / Glazed tiles/ Clay tiles/ Cuddaph slab tiles/ Wall tiles in Cement mortor without affecting the adjacent structures |
| 6 | Dismantling clearing away and carefully stacking materials useful for reuse of Plain Cement Concrete without affecting the adjacent structures |
| 7 | Earth work excavation for foundation in all soils and sub-soils and to the required depth as may be directed except in hard rock requiring blasting (Including Refilling)(a) 0 to 2m depth |
| 8 | Flooring with a bed of Cement Concrete 1:5:10 with Admixture using 40mm size hard broken stone jelly |
| 9 | Providing and laying in position, Standardized concrete mix M20 Grade in accordance with IS 456-2000 using 20mm and downgraded hard broken stone jelly for all RCC items (b) In Ground Floor |
| 10 | (c) In First Floor |
| 11 | Providing Cuddappah slab of 40mm thick finishing with two sides for cupboard, sunshade, ward-robes, shelves, side slabs of boxing around windows, kitchen platform slabs, sink and other similar works (Both side Polished)(a) In Ground Floor |
| 12 | Providing Form work and centering for reinforced cement concrete works including supports and strutting upto 3.30m height for plain surfaces (b) Plain surfaces such as Roof slab, Floor slab, Beams Lintels, Loft, Sill slab, Staircase waist, Portico slab and other similar works. |
| 13 | (c) Square and rectangular columns and small quantities such as Sunshades, Parapet cum Drops,Window boxings,Fin projects and other similar works. |
| 14 | (d) For Vertical Walls |
| 15 | Supplying, fabricating and placing in position of Mild steel Grills/Ribbed Tor Steels (Without Cement Slurry) for reinforcement for all floors |
| 16 | Supplying and fixing of Vetrified tiles of best approved quality (Ivory) 600x600x8mm for flooring and other similar works over Cement Mortar 1:3 with Admixture 20mm thick |
| 17 | Supplying and laying of Ceramic Tiles (Anti-Skid) for flooring and other similar works over cement mortor 1:3 with Admixture 20mm thick |
| 18 | Brick Partition wall in Cement Mortor 1:4 with Admixture 110mm thick for super structure in the following floors using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm) (a) For Foundation and Basement |
| 19 | Supplying and fixing of Precast cement concrete slab for cupboard/ward robes shelves, cover slab for chambers, baffle walls side slabs of boxing around windows and other similar works in Standardized Cement Concrete Mix M-20 Grade ii) 40mm thick(a) In Foundation and basement |
| 20 | Brick work in Cement Mortar 1:5 using kiln burnt country bricks of size 8 3/4\\"X4 1/4\\" X 2 3/4\\" (22x11x7cm) with Admixture in Foundation and Basement |
| 21 | Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand) using Kiln Burnt Country bricks of size 8 3/4\\"X4 1/4\\"X2 3/4\\" (22X11X7cm) with Admixture for super structure(a) In Ground Floor |
| 22 | (b) In First Floor |
| 23 | Plastering with C.M. 1:5 with Admixture 12mm thick finished with neat cement |
| 24 | Finishing the top of flooring with cement concrete 1:3 20mm thick Ellispattern flooring (No Sand) and surface rendered smooth |
| 25 | Weathering course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand) over RCC Roof Slab |
| 26 | Finishing top of roof with one course of Hydraulic pressed tiles of size 23cm x 23cm x 20mm tk laid over weathering course in CM 1:3 with Admixture 12mm thick |
| 27 | Supplying and fixing of 4 mm thick pin headed Glass Panels with aluminium anodized U shape beeding |
| 28 | Manufacturing and supplying of steel windows confirming to IS 1038/1983 Specification with steel section used for fabrication of windows |
| 29 | Supplying and fixing of 4' 18 Watts Crystal LED Tube light and fixing of the tube light fittings on teak wood round blocks |
| 30 | Supplying and fixing of 25 Watts LED Street Light fitting with LED arrangements |
| 31 | Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor, etc., (a) 48\\" Electric fan 1200mm sweep |
| 32 | Charges for assembling and fixing of Ceiling Fan of Different Sweep |
| 33 | Supplying and fixing of 9 Watts LED Bulb |
| 34 | Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992-type 'A' for Rain Water Down Fall Pipe |
| 35 | Supply and errection of Rotational Moulded Polyethylenewater storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 700 litres (excluding free board) with ISI Mark |
| 36 | Supplying and laying and jointing the following dia Non Pressure Pipe of SN-8 SDR 34 (S 16.5) as per IS -15328 /2003a) 110mm dia UPVC Non Pressure Pipe |
| 37 | Supplying and fixing of Half Turn Brass core CP Long Body Tap of 15mm dia |
| 38 | Supplying and fixing of Half Turn Brass core CP Short Body Tap of 15mm dia |
| 39 | Supplying and fixing of Indian Water Closet White Glazed (Oriya type) of size 580mm x 440mm of approved make with ISI mark |
| 40 | Supplying and fixing EWC (Europen Water Closet) (White) Superior Variety 500mm with PVC SWR grade \\"P\\" or \\"S\\" TRAP |
| 41 | Supplying,Laying and fixing of 40mm dia PVC Pipe 10Kg/Cm2 |
| 42 | Supplying, laying, fixing and jointing the following dia PVC Pipes as per ASTM D-1785 of schedule 40 (a) 32mm dia ASTM-D schedule 40 threaded PVC Pipe |
| 43 | (b) 25mm dia ASTM-D schedule 40 threaded PVC Pipe |
| 44 | Supplying, laying, fixing and jointing the following pvc pipes as per ASTM D-1785 of schedule 40 (c) 20mm ASTM D schedule 40 threaded PVC pipe |
| 45 | Special Ceiling Plastering in Cement Mortor 1:3 with Admixture 10mm thick |
| 46 | Run off 4 wires of 4 Sq mm. PVC insulated single core multi strand fire retard flexible copper cable with ISI mark |
| 47 | Supply and fixing of 16 Amps Double pole main switch with fuse and neutral link on a suitable well varnished teak wood board |
| 48 | Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992 type \\"B\\" for soil line (a) 110mm dia PVC SWR Pipe |
| 49 | (b) 75mm dia PVC SWR Pipe |
| 50 | Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame of size 50X47mm with a wall thickness of 5mm, |
| 51 | White washing Three coats for new plastered surface using clean shell lime slaked |
| 52 | Painting the old iron work with Two coats and other similar works such as PVC/ASTM pipes, Kerb stone and grills with approved First class synthetic enamel paint including thorough scrapping etc |
| 53 | Painting the New iron work and other similar works such as PVC/ASTM pipes, Kerb stone and grills with two coats of approved synthetic enamel ready mixed paint |
| 54 | Painting the old wood work with two coats of approved First class synthetic enamel paint including thorough scrapping etc. |
| 55 | Painting the old inner walls with Two Coats of approved best Ready mixed Plastic Emulsion paint in addition to one coat of approved primer coat over old wall surfaces, including thorough scrapping |
| 56 | Painting the New walls with two coats of approved best ready mixed Plastic Emulsion paint in addition to one coat of approved primer coat over cement plastered wall surfaces and ceiling |
| 57 | Painting the Outer New walls with two coats of approved best ready mixed Exterior Emulsion paint in addition to one coat of approved primer coat over cement plastered wall surfaces and ceiling |
| 58 | Painting the old outer walls with Two Coats of approved best Ready mixed Exterior Emulsion paint in addition to one coat of approved primer coat over old wall surfaces, including thorough scrapping |
| 59 | Wiring with 1.5 Sqmm PVC Insulated single core multi strand fire retradant flexible copper cable with ISI mark (a) Light point with ceiling rose. |
| 60 | (b) Light point without ceiling rose. |
| 61 | Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark for Fan Point |
| 62 | Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook |
| 63 | Wiring with 1.5 sqmm P.V.C insulated single core Multi Strand Fire retardant flexible copper cable with ISI mark for 5 Amps 5 Pin Plug Socket point at SWITCH BOARD ITSELF |
| 64 | Wiring with 1.5 sqmm copper P.V.C insulated unsheathed single core Multi Strand Fire retardant flexible copper cable with ISI mark for 5 Amps 5 Pin Plug Socket point at CONVENIENT PLACES |
| 65 | Supply and fixing of 15 Amps 3 Pin plug type wall socket on suitable MS Box of 16g thick |
| 66 | Run off main with 2 wires of 2.5 sqmm PVC Insulated single core multi strand fire retardant flexible copper cable |
| 67 | Providing Two legged Scaffolding using 15Cm dia casurina props using country wood planks 40mm thick (a) Initial height of 3 m and length of 1 m |
| 68 | Supplying and filling in Foundation and Basement with filling crushed stone sand in layers of 150mm thickness |
| 69 | Supplying and fixing of Fibre Mixed Precast Slab of 50mm Thick of all required shapes made in cement concrete 1:3:6 with Admixture using 20mm hard broken stone jelly |
| 70 | Supplying and fixing of Electro Mechanically operated Single Phase Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/RCCB) Please Enable Macros to View BoQ information |
