|
| 1 | Removing the damaged existing floor finish & dadooing walls in cement mortar with Mosaic tiles / Glazed tiles/ Clay tiles/ Cuddaph slab tiles/ Wall tiles in Cement mortor without affecting the adjacent structures |
| 2 | Dismantling clearing away and carefully stacking materials useful for reuse of Plain Cement Concrete without affecting the adjacent structures |
| 3 | Dismantling clearing away and carefully stacking materials useful for reuse of brick masonry in Cement mortar add for every additional 3m or part there of over the initial height of 3m walls without affecting the adjacent structures |
| 4 | Dismantling clearing away and carefully stacking materials useful for reuse of Pressed Tiles and Weathering Course without affecting the adjacent structures |
| 5 | Removing the existing doors and windows including the removal of frames, hinges, fastenings and shutters form the existing structure |
| 6 | Dismantling clearing away and carefully stacking materials useful for reuse of AC Sheet Roofing without roof timbers without affecting the adjacent structures |
| 7 | Clean removal of Cement plaster from the old wall and without affecting the adjacent structures |
| 8 | Earth work excavation for foundation in all soils and sub-soils and to the required depth as may be directed except in hard rock requiring blasting (Including Refilling) (a) 0 to 2m depth |
| 9 | Plain Cement Concrete 1:5:10 (One of Cement, five of Crushed stone sand and ten of hard broken stone jelly) with Admixture for foundation using 40mm gauge hard broken stone jelly |
| 10 | Providing Form work and centering for reinforced cement concrete works including supports and strutting upto 3.30m height for plain surfaces (a) For Column Footings, Plinth Beam, Grade Beam, Raft Beam, Raft slab etc., |
| 11 | (b) Plain surfaces such as Roof slab, Floor slab, Beams Lintels, Loft, Sill slab, Staircase waist, Portico slab and other similar works. |
| 12 | (c) Square and rectangular columns and small quantities such as Sunshades,Parapet cum Drops,Window boxings,Fin projects and other similar works. |
| 13 | Providing and laying in position, Standardized concrete Mix M20 Grade in accordance with IS 456-2000 using 20mm and downgraded hard broken stone jelly for all RCC works (a) In Foundation and Basement |
| 14 | Providing and laying in position, Standardized concrete mix M20 Grade in accordance with IS 456-2000 using 20mm and downgraded hard broken stone jelly for all RCC items of works (b) In Ground Floor |
| 15 | Supplying, fabricating and placing in position of Mild steel Grills/Ribbed Tor Steels (Without Cement Slurry) for reinforcement for all floors |
| 16 | Brick work in Cement Mortar 1:5 (One of cement and five of Crushed stone sand) using kiln burnt country bricks of size 8 3/4\\"X4 1/4\\" X 2 3/4\\" (22x11x7cm) with Admixture in Foundation and Basement |
| 17 | Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand) using Kiln Burnt Country bricks of size 8 3/4\\"X4 1/4\\"X2 3/4\\" (22X11X7cm) with Admixture for super structure (a) In Ground Floor |
| 18 | Brick Partition wall in Cement Mortor 1:4 (one of cement and four of crushed stone sand) with Admixture 110mm thick for super structure in the following floors using kiln burnt country bricks of size 8¾”x4¼”x2¾” (22x11x7cm)(a) For Foundation and Basement |
| 19 | (b) For Ground Floor |
| 20 | Weathering course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand) over RCC Roof Slab . |
| 21 | Finishing top of roof with one course of Hydraulic pressed tiles of approved superior quality of size 23cm x 23cm x 20mm tk laid over weathering course in CM 1:3 with Admixture 12mm thick mixed with water proofing compound at 2% by weight of cement |
| 22 | Polishing the existing Mosaic flooring with polishing machine including washing the floor , polishing medium and nice and wax coat |
| 23 | Supplying and fixing of Vetrified tiles of best approved quality (Ivory) 600x600x8mm for flooring and other similar works over Cement Mortar 1:3 with Admixture 20mm thick |
| 24 | Supplying and laying of polished shahabad slab /stone, 20mm thick (Grey colour) of approved qualty for florring in CM 1:3 with Admixture 20mm thick and other similar works |
| 25 | Supply, delivery and fixing of Jet Black colour Granite slab (super fine polished with machine cut edges) for urinal partition of best quality of size 4'x2' and above 18mm to 20mm thick over cement plastering in CM 1:3 with admixture (a) In Ground Floor |
| 26 | Providing Single Nosing to the Edges of Granite Slab of 20mm thick including labour, power consumption tools and plants |
| 27 | Flooring with a bed of Cement Concrete 1:5:10 with Admixture using 40mm size hard broken stone jelly |
| 28 | Plain Cement Concrete 1:2:4 with Admixture using 20mm gauge hard broken stone jelly |
| 29 | Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size size 10mm and below) 20mm thick Ellispattern flooring (No Sand) and surface rendered smooth |
| 30 | Plastering with C.M. 1:5 with Admixture 12mm thick finished with neat cement |
| 31 | Plastering in CM 1:5 with Admixture 12mm thick for border finish (b) 75mm wide border |
| 32 | Special Ceiling Plastering in Cement Mortor 1:3 with Admixture 10mm thick for bottom of roof, stair, waist, landing and sunshades in all floors |
| 33 | Finishing the top of flooring in CM 1:4 with Admixture 20mm thick including surface rendered smooth |
| 34 | Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992-type 'A' for Rain Water Down Fall Pipe with relevant specials |
| 35 | Supplying and fixing of 1200mm dia 30cm depth 40mm thick RCC round precast collar |
| 36 | Supplying and fixing of 1200mm dia 40mm thick RCC round precast collar cover slab |
| 37 | Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement |
| 38 | Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement |
| 39 | Providing Rain water harvesting pit by augering 300mm dia bore pits to a depth of 5.50m overall depth and filling with stone jelly of 40mm size including earth work excavation a. Providing pit |
| 40 | b. Augering 30cm dia |
| 41 | Supplying, laying, fixing and jointing the following dia PVC Pipes as per ASTM D-1785 of schedule 40 (a) 32mm dia ASTM-D schedule 40 threaded PVC Pipe |
| 42 | (b) 25mm dia ASTM-D schedule 40 threaded PVC Pipe |
| 43 | Supplying and fixing of 15mm dia Engineering Polymer Tap (Long body) |
| 44 | Supplying and fixing of 15mm dia Engineering Polymer Tap (Short body) |
| 45 | Supplying and fixing of Mild Steel Grills as per the Design Approved to verandah enclosure or gate |
| 46 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter |
| 47 | Supplying and fixing of Teak wood wrought and putup for frames of doors, windows, ventilators, cupboard and any other similar joinery works (a) Teak wood over 2.00m and below 3.00m length 2.00m |
| 48 | (b) Teak wood below 2.00m length |
| 49 | Supplying and fixing of Best Indian Teak Wood Paneled door shutters Single Leaf in position fixing the Brass fittings a) Single leaf suitable for door size 900mm x 2100mm |
| 50 | Providing T.W double leaf shutters with 9mm thick BWR ply wood for cupboard / ward robes shutters |
| 51 | Supplying and fixing of best Indian Teak Wood panelled door of Double leave shutters in position fixing with Brass fittingsb) 1500x2100mm Brass fittings (Double leaf) |
| 52 | Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 amps. 5 pin plug socket point at convenient places including circuit mains, cost of all materials, specials, etc., all complete, (Open wiring) |
| 53 | Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 amps. 5 pin plug socket point at Switch Board Itself including circuit mains, cost of all materials, specials, etc., all complete, (Open wiring) |
| 54 | Supply and fixing of 5 Amps / 15 Amps 3 pin flush type wall socket |
| 55 | Open wiring with 1.5 Sqmm Copper PVC insulated unsheatherd single core 1.1 kv grade cable for FAN POINT (OPEN WIRING) |
| 56 | Wiring with 1.5 Sqmm PVC insulated single core multi strand fire retradant flexible copper cable with ISI mark (a) Light point with ceiling rose. (Open Wiring) |
| 57 | (b) Light point without ceiling rose. (Open Wiring) |
| 58 | Supplying and fixing of Water tight bulk head fitting with Guard suitable for 12W LED Bulb) |
| 59 | Supplying and fixing of 25 Watts LED Street Light fitting with LED arrangements |
| 60 | Supplying and fixing of 300 mm dia sweep AC exhaust fan of approved ISI quality |
| 61 | Run off main with 2 wires of 4 sqmm PVC Insulated single core multi strand fire retardant flexible copper cable with ISI mark |
| 62 | Run off main with 2 wires of 2.5 sqmm PVC Insulated single core multi strand fire retardant flexible copper cable with ISI mark |
| 63 | Supply and fixing of 16 Amps Double pole main switch with fuse and neutral link on a suitable well varnished teak wood board |
| 64 | Supplying and fixing of 12 Watts LED Bulb of best quality |
| 65 | Supplying and fixing of 9 Watts LED Bulb of best quality |
| 66 | Supplying and fixing of 4' 18 Watts Crystal LED Tube light and fixing of the tube light fittings on teak wood round blocks |
| 67 | Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor, etc.(a) 48\\" Electric fan 1200mm sweep |
| 68 | Charges for assembling and fixing of Ceiling Fan of Different Sweep with necessary Connections and fixing of Fan regulator on the existing Board etc, all complete (Excluding Cost of Fan) |
| 69 | Supplying and fixing in position of Colour galvalume sheet of 0.47mm thick as ridge piece inclusive of overlap length labour charges and nuts, bolts etc., |
| 70 | Supply and fixing Mild steel angles for truss work |
| 71 | Supply and errection of Rotational Moulded Polyethylenewater storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 700 litres (excluding free board) of approved brand (superior variety) with ISI Mark |
| 72 | Painting the New iron work and other similar works such as PVC/ASTM pipes, Kerb stone and grills with two coats of approved synthetic enamel ready mixed paint |
| 73 | Painting the old iron work with Two coats and other similar works such as PVC/ASTM pipes, Kerb stone and grills with approved First class synthetic enamel paint including thorough scrapping etc., |
| 74 | Painting the old wood work with two coats of approved First class synthetic enamel paint including thorough scrapping etc. |
| 75 | Providing Wooden (MELAMEN DOOR) Polish for new wood by removing by blade scrapping the existing dirt from the wooden surface sand paper |
| 76 | White washing Two coats for existing surface using clean slacked shell lime |
| 77 | Painting the Outer New walls with two coats of approved best ready mixed Exterior Emulsion paint in addition to one coat of approved primer coat over cement plastered wall surfaces and ceiling |
| 78 | Painting the old walls with Two Coats of approved best Ready mixed Exterior Emulsion paint without primer, including thorough scrapping |
| 79 | Painting the old walls with Two Coats of approved best Ready mixed plastic Emulsion paint without primer, including thorough scrapping Please Enable Macros to View BoQ information |
