|
| 1 | M&L 75 mm thick Cement concrete type D-2 1:4:8 (40mm graded stone aggregate) as in sub base of flooring/hard standing, complete all as specified and as directed. |
| 2 | M&L for 25 mm thick PCC type B1 (1:2:4) using 20 mm graded stone agg as in flooring finised even and fair w/o using extra cement, complete all as specified and as directed. |
| 3 | M&L for Forming Construction (Dummy joints 50mm deep x 10mm wide, filled with sealing compound of Grade A, complete all as specified and as directed. |
| 4 | M & L for non skid coloured ceramic tile 7 to 8mm thick ( Square/rectangular/in joint less) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 5 | M&L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) finished fair and even without using extra cement as in sub-floors, sub-bases, floors, pavings etc, complete all as specified and as directed. |
| 6 | M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 7 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade pointed with grey cement and pigment, complete all as specified and as directed. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 9 | S&F for Roof trusses Size (70 x 70 x6)mm fe 410-w(gde-E-250)quality-A (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.complete as specified and directed. |
| 10 | M&L for newly steel Surfaces painting size (70x70x6) mm of any description, over 10cm in width or girth,not otherwise described two coat of synthetic enamel paint over one coat of primer, complete all as specified and as directed. |
| 11 | Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish off the permishes, complete all as specified and as directed. |
| 12 | S&F pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw incl dismantling, complete all as specified and as directed. |
| 13 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling, complete all as specified and as directed. |
| 14 | S&F 1000 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed. |
| 15 | S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm-210 gms), complete all as specified and as directed. |
| 16 | Demolition of brick work, PCC block masonary, stone masonary or boulder masonry built in cement mortar, complete all as specified and as directed. |
| 17 | M & L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6), complete all as specified and as directed. |
| 18 | M & L For Rendering 15 mm thick plastering on brick work or concrete surface in CM (1:46) and rendering is to be finished even and smooth w/o using extra cement, complete all as specified and as directed. |
| 19 | Preparing newly plastered surfaces and applying two coat of cement base paint, complete all as specified and as directed. |
| 20 | Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 21 | M & L for Rendering 10 mm thick plastering on brick work or concrete surface in CM (1:4) and rendering is to be finished even and smooth w/o using extra cement, complete all as specified and as directed. |
| 22 | preparation of undecorated/old surfaces of walls and applying two coat of white wash, complete all as specified and as directed. |
| 23 | M&L for preparation of new plastered surfaces and applying three coats of white wash, complete all as specified and as directed. |
| 24 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed. |
| 25 | S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed. |
| 26 | S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b), complete all as specified and as directed. |
| 27 | S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed. |
| 28 | S&F Aluminium anodised, barrel tower bolts 200 mm of extruded section and fixed, complete all as specified and as directed. |
| 29 | S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and as directed. |
| 30 | S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, complete all as specified and as directed. |
| 31 | S&F Aluminium handles 100 mm , cast type,anodised, complete all as specified and as directed. |
| 32 | S&F Aluminium handles 150 mm , cast type,anodised, complete all as specified and as directed. |
| 33 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard and 60 cm long, complete all as specified and as directed. |
| 34 | S&F in repair corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard, complete all as specified and as directed. |
| 35 | S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl brackets with waste fittings and connection pipe etc including pedestal, complete all as specified and as directed. |
| 36 | S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern ) incl flush pipe 60 cm long, complete all as specified and as directed. |
| 37 | S&F vitreous chine wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cover incl provision of concrete/ white cementing and P or S trap in repairs, complete all as specified and as directed. |
| 38 | S&F in repair Viterous China urinal, flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm bore PVC waste pipe fixed in repair incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and as directed. |
| 39 | S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe, complete all as specified and as directed. |
| 40 | S&F in repair for 15 mm bore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule in repair, complete all as specified and as directed. |
| 41 | S&F in repair stop/angle valves fancy tupe chromium plated screwed down high presure , with crutch or butterfly handle, cscrewed both ends for iron pipe or for unions 15 mm bore, complete all as specified and as directed. |
| 42 | S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed. |
| 43 | S&F in repair PVC (SWR) junction single T equal or unequal 110 mm dia, complete all as specified and as directed. |
| 44 | S&F in repair PVC (SWR) bends 110 mm dia fixed, complete all as specified and as directed. |
| 45 | S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed. |
| 46 | S&F in PVC (SWR) junction single T equal or unequal 75 mm dia, complete all as specified and as directed. |
| 47 | S&F in repair PVC (SWR) bends 75 mm dia fixed, complete all as specified and as directed. |
| 48 | S&F in repair PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing, complete all as specified and as directed. |
| 49 | Taking down and replacement with 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors, complete all as specified and as directed. |
| 50 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages, complete all as specified and as directed. |
| 51 | S&F in repair CP health faucet hand held triggered nozzle and delivers a spray of water with pipe, complete all as specified and as directed. |
| 52 | Demolition of cement concrete reinforcement cut as required to facilitate demolition) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 53 | M & L precast RCC manholes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, complete all as specified and as directed. |
| 54 | Mild steel TMT bars 8 mm dia, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 55 | Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.20 m dia x 3.00 m deep.complete all as specified and shown in drg No.CESZ/TD-1080/2011, complete all as specified and as directed. |
| 56 | M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregates as in bed to drain pipes including packing under and haunching against the sides of pipes after these are laid tested for 150 mm bore of pipes, complete all as specified and as directed. |
| 57 | M&L PCC 1:3:6 type C-2 using 40mm graded stone agg in foundation and mass concrete, complete all as specified and as directed. |
| 58 | Cement concrete 1:2:4 type B-1 (using 40mm graded crushed stone aggregate) as in surface channels, drains etc, complete all as specified and as directed. |
| 59 | M & L 1:2:4 types B-1 (using 20 mm graded stone agg as in coping etc, complete all as specified and as directed. |
| 60 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with WPC, finished even and smooth complete. (WPC shall be measured and paid separately). |
| 61 | Supply only integral water proofing compound, complete all as specified and as directed. |
| 62 | M&L Hardcore of gauge n exc. 63 mm, broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 63 | M&L for Cement concrete (1:4:8) type D2 100mm thick 40mm graded aggregate in sub floor,etc finished fair and even without using extra cement, complete all as specified and as directed. |
| 64 | M&L for 75mm thick PCC 1:3:6 type C2 (using 20mm graded crash stone aggregate)as use in plinth protection etc.finished even and smooth with using extra cement and making joint & filled complete all as specified and as directed. |
| 65 | M&L Forming 6mm thick Expansion joints filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' . 50mm deep, complete all as specified and as directed. |
| 66 | M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cm1:4, complete all as specified and as directed. |
| 67 | M&L for Dark shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 68 | Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each, complete all as specified and as directed. |
| 69 | Taking down Chowkhats or frames with shutters n.exc 1.5 sq.m each, complete all as specified and as directed.. |
| 70 | S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed as use 1st class softwood.complete as specified and directed. |
| 71 | M&L for Glazed and skeleton shutters,1st class softwood 35mm thick shutter open rebated and prepared to receive glass, gauze,etc.(without sash bars),dges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.;sizes of me-mbers of shutters as specified in SSR Part I,Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed. |
| 72 | S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 73 | S&F for Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each, complete all as specified and as directed. |
| 74 | M&L for newly wooden Surfaces painting of any description two coat of synthetic enamel paint over one coat of pink primer, not otherwise descri-bed, over 10cm width or girth, complete all as specified and as directed. |
| 75 | M&L for Old wooden Surfaces painting of any description two coat of synthetic enamel paint over one coat of pink primer, not otherwise descri-bed, over 10cm width or girth, complete all as specified and as directed. |
| 76 | S&F for Aluminium anodised,barrel tower bolts 75mm of extruded section and fixed, complete all as specified and as directed. |
| 77 | S&F for Butt hinges, 50mm long medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 78 | S&F for Butt hinges, 50mm long medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 79 | S&F for Aluminium alloy, anodised,sliding door bolt 200mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 80 | S&F for Extruded aluminium alloy handles,size of handle in 100mm fabricated type,anodised, complete all as specified and as directed. |
| 81 | S&F for Extruded aluminium alloy handles,size of handle in 75mm fabricated type,anodised, complete all as specified and as directed. |
| 82 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed. |
| 83 | M&L for Weather boarding 2nd class softwood, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed. |
| 84 | Fixing Only for Weather boarding 2nd class softwood, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed. |
| 85 | Dismantling timber scantlings 40 sq. cm and over in section framed work, in any position, complete all as specified and as directed. |
| 86 | M&L for Second class soft-wood clean sawn in scantlings, complete all as specified and as directed. |
| 87 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed. |
| 88 | M&L for Cement concrete type D-2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete, complete all as specified and as directed. |
| 89 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed. |
| 90 | S&F for Galvanised, corrugated mild steel sheeting with two corrugations side lap 0.63 mm thick, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed. |
| 91 | Refixing for Galvanised, corrugated mild steel sheeting with two corrugations side lap 0.63 mm thick, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed. |
| 92 | S&F for Plain, galvanised, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and as directed. |
| 93 | S&F for newly painted Surfaces of any description, not over 10cm width or girth two coat of synthetic enamel over one coat of red oxide, complete all as specified and as directed. |
| 94 | S&F for old painted Surfaces of any description, not over 10cm width or girth two coat of synthetic enamel over one coat of red oxide, complete all as specified and as directed. |
| 95 | Demolition for Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and as directed. |
| 96 | M&L Veneered decorative plywood, 4mm thick grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work.as use in wall surface with cover fillets, complete all as specified and as directed. |
| 97 | M&L Veneered decorative plywood, 4mm thick grade 1 (with BWR resin) with decorative face veneers on single faces; fixed with screws to timber frame work.as use in ceiling surface with cover fillets, complete all as specified and as directed. |
| 98 | M&L Plain fillets, Square rectangular or triangular in section, clean sawn Exc 13& n.exc 25 sqm 2nd class hardwood, secured with nails or brads.incl Dismantling timber framed scantlings under 40 sq. cm in section, in any position, complete all as specified and as directed. |
| 99 | M&L for Non - skid Colour Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed. |
| 100 | S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, butterfly handle, screwed both ends for iron pipe or for unions and fixed 20mm dia, complete all as specified and as directed. |
| 101 | S&F in repairs complete Plug type bib taps, cast iron, screwed for iron pipe and fixed 20mm dia, complete all as specified and as directed. |
| 102 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates as use in vertical member. Size (50x50x6)mm.Fe 410-w Gde-E-250quality A, complete all as specified and as directed. |
| 103 | S&F in repair for PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors including Demolition and breaking up drain pipes 100mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and as directed. |
| 104 | S&F in repairs 100 mm dia PTMT Grating doom (Minimum weight 25 gms), complete all as specified and as directed. |
| 105 | S&F inrepair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed. |
| 106 | S&F in repair for PVC valveless, syphonic action type,10 liters flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and PVC connection, complete all as specified and as directed. |
| 107 | S&F inrepair for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern, complete all as specified and as directed. |
| 108 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 109 | S&F for Anodised aluminium frame for doors, windows, ventilators add extra power coating with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed. |
| 110 | S&F for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and as directed. |
| 111 | S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed. |
| 112 | S&F for Sheet glass,selected quality and glazing with oil putty in squares exc 0.5 sq. m in each pane, complete all as specified and as directed. |
| 113 | S&F in repair for Prelaminated 9mm thick particle board, interior grade,prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and as directed. |
| 114 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft Soil, complete all as specified and as directed. |
| 115 | M&L for Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, complete all as specified and as directed. |
| 116 | Demolition Brickwork or stone/ boulder masonry, laid in cement mortar or cement mortar, complete all as specified and as directed. |
| 117 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed. |
| 118 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed. |
| 119 | M&L for Rendering 10mm thick in cement morter 1:4 on fair faces of brick work or concrete surface.finished even and smooth with out using extra cement, complete all as specified and as directed. |
| 120 | M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and as directed. |
| 121 | M&L for 3mm thick wall care putty on wall, complete all as specified and as directed. |
| 122 | M&L for applying two coats of oil emulsion distemper over a coat of concrete primer, complete all as specified and as directed. |
| 123 | S&F for lnsulated PVC Wall & ceilling Lining consisting of PVC Insulated Panels 25mm thick having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall and ceilling including Cover fillets and bedding, complete all as specified and as directed. |
| 124 | Providing, precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match, complete all as specified and as directed. |
| 125 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed. |
| 126 | S&F inrepair for 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joint , laid in trenches or in floors, complete all as specified and as directed. |
| 127 | M&L for Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level use in brokenstone or boulder, complete all as specified and as directed. |
| 128 | M&L for Glazed ceramic coloured tiles in vertical surface 450x 350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match.as use in dados.including dismantling, complete all as specified and as directed. |
| 129 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store 20mm dia, complete all as specified and as directed. |
| 130 | S&F for 3-layer PP-R Polypropylene random copolymer) concealed pipes 20mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded poly propylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and as directed. |
| 131 | Dismantling water tanks and removing to store Exc 500&n.exc 1000 ltr, complete all as specified and as directed. |
| 132 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed. |
| 133 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement.including hings,Tower bolt .suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed. |
| 134 | Taking down carefully copper/aluminium point wiring (light, Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surface of walls, floors etc. |
| 135 | M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked conduit conceled in wall/ceiling all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made rectangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is. |
| 136 | (a) One light/fan point/Exhaust fan point controlled by one 5 Amps switch one way. |
| 137 | (b) One 3 pin 5 Amp switch socket combination 5 Amps switch socket oulet on independent board. |
| 138 | (c) One 3 pin 3 Amp switch socket outlet on same board with accessories. |
| 139 | M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor. |
| 140 | S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed |
| 141 | S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed |
| 142 | S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete with gang box all as specified and as directed |
| 143 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and as directed. |
| 144 | Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body all as specified and directed |
| 145 | S&F in repairs Distribution Board, SPN 8 Way, Double door complete all as specified and as directed |
| 146 | S & F in repairs MCB,DP 63 Amps 240 Volts B curve, complete all as specified and as directed |
| 147 | S & F in repairs MCB,DP 40 Amps 240 Volts B curve, complete all as specified and as directed |
| 148 | S & F MCB Single pole 6-32A Amps 240 Volts B Curve complete all as specified and directed |
| 149 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed. |
| 150 | S&F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 151 | Supply and fixing LED bulb 12 W, 220V suitable size from ceiling rose, complete all as specified and as directed. |
| 152 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 153 | S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and as directed. |
| 154 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, complete all as specified and as directed. |
| 155 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated Supply Supply and fix complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 156 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular 16 sqmm, complete all as specified and as directed. |
| 157 | S&F Havells Grey 400 mm SKU Code FHWSWSTIVR 16 Swing Wall Mounted fan Size sweep, complete all as specified and as directed. |
| 158 | S&F Stepped type electonic fan regulator flush type on the existing phenolic laminated sheet, complete all as specified and as directed. |
| 159 | Supply & fixing in repair capacitor 1.5/2 mfd suitable for 1200mm sweep ceiling fan, complete all as specified and as directed. |
| 160 | Taking down and dismantling the ceiling fan from site and removing its allied smaller parts for cleaning, servicing, oiling and lubricating and replacement of unserviceable parts such as bearings, bushes, etc and refixing the same fan in its original position with all the parts i.e. down rod, canopies, fan blades, spilt pins, screws, nuts and spring washers complete including, flexible chord of 24 / 0.20mm with necessary connector (for blade / body) as required after rewinding complete all as specified and directed. Note : Spares used and rewinding shall be measured and paid seperatly under relevant item. |
| 161 | M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 2.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM |
| 162 | Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sq mm , 2 Core, complete all as specified and as directed. |
| 163 | Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sq mm , 2 Core, complete all as specified and as directed. |
| 164 | M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc. |
| 165 | Note:- Schedule of credit Rs 70674.18 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
