|
| 1 | PREPARATION AND SUBMISSION OF DESIGN FOR SHED OVER COOLING TOWER MECHANICAL STORAGE ROOM AND CAR PARKING SHED WITH RESPECT TO EXISTING BUILDING STRUCTURES/SITE CONDITIONS AND SUBMISSION OF DETAILED STRUCTURAL STEEL FABRICATION/SHOP DRAWINGS AND LAYOUTS IN CONSULTATION WITH RCF. |
| 2 | CHECKING AND FINALIZATION OF EXISTING AVAILABLE DRAWINGS FOR DESIGN FOR POTASSIUM STORAGE BUILDING AND COOLING TOWER MCC ROOM SHEDS WITH RESPECT TO EXISTING BUILDING STRUCTURES/SITE CONDITIONS AND SUBMISSION OF DETAILED STRUCTURAL STEEL FABRICATION/SHOP DRAWINGS AND LAYOUTS IN CONSULTATION WITH RCF. |
| 3 | STABILITY CERTIFICATION OF THE NEWLY CONSTRUCTED SHEDS (SHED OVER TERRACES OF POTASSIUM STORAGE BUILDING, COOLING TOWER MECHANICAL STORAGE ROOM AND COOLING TOWER MCC ROOM WITH PROVISION OF CAR PARKING SHED), AS PER RCF'S PROFORMA AFTER COMPLETION OF CONSTRUCTION. |
| 4 | EXCAVATION BY MECHANICAL MEANS FOR FOUNDATION IN EARTH,SOIL OF ALL TYPES,SAND, GRAVEL AND SOFT MURUM, INCLUDING REMOVING THE EXCAVATED MATERIAL UP TO A DISTANCE OF 50M BEYOND THE BUILDING AREA AND STACKING AND SPREADING AS DIRECTED, DEWATERING, PREPARING THE BED FOR THE FOUNDATION AND NECESSARY BACKFILLING, RAMMING, WATERING INCLUDING SHORING AND STRUTTING ETC. COMPLETE. (LIFT UPTO 0.00 TO 1.50 M). |
| 5 | EXCAVATION BY MANUAL MEANS FOR FOUNDATION IN EARTH,SOIL OF ALL TYPES,SAND, GRAVEL AND SOFT MURUM, INCLUDING REMOVING THE EXCAVATED MATERIAL UP TO A DISTANCE OF 50M BEYOND THE BUILDING AREA AND STACKING AND SPREADING AS DIRECTED, DEWATERING, PREPARING THE BED FOR THE FOUNDATION AND NECESSARY BACKFILLING, RAMMING, WATERING INCLUDING SHORING AND STRUTTING ETC. COMPLETE. (LIFT UPTO 0.00 TO 1.50 M). |
| 6 | REMOVAL AND CARRIAGE OF SURPLUS EXCAVATED EARTH, DEBRIS, DISMANTLED MATERIALS ETC., FROM THE SITE OF WORK TO OTHER AREAS ANYWHERE WITHIN THE FACTORY UP TO 3 KM / PLANT BATTERY LIMITS BEYOND THE INITIAL LEAD OF 50M AND SPREADING THE SAME INCLUDING LOADING AND UNLOADING AS PER THE DIRECTION OF ENGINEER-IN-CHARGE. |
| 7 | PROVIDING AND LAYING DRY / TRAP / GRANITE / QUARTZITE / GNEISS RUBBLE STONE SOLING 15 TO 20 CM THICK INCLUDING HAND PACKING & COMPACTING ETC. COMPLETE AS DIRECTED. |
| 8 | DISMANTLING BRICK MASONRY IN LIME OR CEMENT MORTAR AND STACKING THE MATERILS AS DIRECTED WITH ALL LEADS, LIFTS ETC. |
| 9 | DISMANTLING STONE MASONRY IN LIME OR CEMENT MORTAR INCLUDING STACKING THE MATERILS AS DIRECTED WITH ALL LEADS, LIFTS ETC. |
| 10 | REMOVING LIME OR LEAN CEMENT CONCRETE INCLUDING STACKING THE SPOILS AS DIRECTED WITH ALL LEADS, LIFTS ETC, COMPLETE. |
| 11 | REMOVING RICH MIX CEMENT CONCRETE INCLUDING STACKING THE SPOILS AS DIRECTED WITH ALL LEADS, LIFTS ETC, COMPLETE. |
| 12 | PROVIDING AND LAYING PLAIN CEMENT CONCRETE M-10, MANUAL / MACHINE MIXED AND MANUAL / MECHANICALLY VIBRATED IN FOUNDATIONS, PLINTH, UNDER FLOORS AS PER EIC ETC., INCLUDING ALL NECESSARY COST OF CENTERING AND SHUTTERING & CURING ETC. COMPLETE. |
| 13 | PROVIDING AND LAYING PLAIN CEMENT CONCRETE M15, MANUAL / MACHINE MIXED IN FOUNDATIONS, PLINTH, UNDER FLOORS AS PER EIC ETC., INCLUDING ALL NECESSARY COST OF CENTERING AND SHUTTERING, ROUGHENEING / FINISHING AS REQUIRED, FINISHING UNEBEN AND HONEYCOMBED SURFACES WITH CEMENT MORTAR 1:3 PLASTER & CURING ETC. COMPLETE. |
| 14 | PROVIDING AND LAYING IN SITU CEMENT CONCRETE OF GRADE M-25 OF TRAP/ GRANITE /QUARTZITE/ GNEISS METAL (USING 20 MM NOMINAL GAUGE GRADED STONE AGGREGATE) FOR R.C.C. WORK IN FOUNDATIONS LIKE RAFT, STRIP FOUNDATIONS, GRADE SLAB, GRILLAGE AND STEEL STANCHIONS ETC. INCLUDING MAKING ARRANGEMENT FOR BAILING OUT OF ANY SEEPAGE WATER UNDERNEATH, DEWATERING, FORMWORK, COVER BLOCKS, COMPACTION AND CURING (EXCLUDING REINFORCEMENT AND STRUCTURAL STEEL) COMPLETE INCLUDING CENTERING, SHUTTERING, FAIR FINISH ETC. COMPLETE IN ALL RESPECTS AS PER DIRECTION OF ENGINEER-IN-CHARGE. |
| 15 | PROVIDING AND LAYING IN SITU CEMENT CONCRETE OF GRADE M-25 OF TRAP/ GRANITE /QUARTZITE/ GNEISS METAL (USING 20 MM NOMINAL GAUGE GRADED STONE AGGREGATE) FOR R.C.C. WORK IN COLUMNS, PEDETSALS, AND WALLS/PARDIS ETC. INCLUDING MAKING ARRANGEMENT FOR BAILING OUT OF ANY SEEPAGE WATER UNDERNEATH, DEWATERING, FORMWORK, COVER BLOCKS, COMPACTION AND CURING (EXCLUDING REINFORCEMENT AND STRUCTURAL STEEL) COMPLETE INCLUDING STEEL / WOODEN CENTERING AND SHUTTERING, FINISHING THE FORMED SURFACES WITH CEMENT MORTAR 1:3 OF SUFFICIENT MINIMUM THICKNESS TO GIVE A SMOOTH AND EVEN SURFACE OR ROUGHENING IF SPECIAL FINISH TO BE PROVIDED ETC. COMPLETE IN ALL RESPECTS AS PER DIRECTION OF ENGINEER-IN-CHARGE. (MINIMUM CEMENT CONTENT SHALL NOT BE LESS THAN 410 KG/CUM.) |
| 16 | PROVIDING AND LAYING IN SITU CEMENT CONCRETE OF GRADE M-25 OF TRAP/ GRANITE /QUARTZITE/ GNEISS METAL (USING 20 MM NOMINAL GAUGE GRADED STONE AGGREGATE) FOR R.C.C. WORK IN BEAMS, LINTELS ETC. INCLUDING MAKING ARRANGEMENT FOR BAILING OUT OF ANY SEEPAGE WATER UNDERNEATH, DEWATERING, FORMWORK, COVER BLOCKS, COMPACTION AND CURING (EXCLUDING REINFORCEMENT AND STRUCTURAL STEEL) COMPLETE INCLUDING STEEL / WOODEN CENTERING AND SHUTTERING, FINISHING THE FORMED SURFACES WITH CEMENT MORTAR 1:3 OF SUFFICIENT MINIMUM THICKNESS TO GIVE A SMOOTH AND EVEN SURFACE OR ROUGHENING IF SPECIAL FINISH TO BE PROVIDED ETC. COMPLETE IN ALL RESPECTS AS PER DIRECTION OF ENGINEER-IN-CHARGE. (MINIMUM CEMENT CONTENT SHALL NOT BE LESS THAN 410 KG/CUM.) |
| 17 | PROVIDING AND FIXING STEEL BAR REINFORCEMENT (TMT FE 500 / 550 ISI MARKED STEEL CONFORMING TO RELEVANT IS CODE) OF VARIOUS DIAMETERS FOR R.C.C. FOOTINGS, FOUNDATIONS, SLABS, BEAMS, COLUMNS, STAIRCASE, NEWELS, CHAJJAS, LINTELS, PARDIS, COPINGS, ARCHES ETC. AS PER DETAILED DESIGNS, DRAWINGS AND SCHEDULES INCLUDING CUTTING, BENDING, HOOKING THE BARS BINDING WITH WIRES, COVER BLOCK SUPPORTING, TACK WELDING AS REQUIRED ETC. COMPLETE. NO EXTRA PAYMENT SHALL BE MADE FOR 18 SWG ANNEALED BINDING WIRES, CHAIRS. (TATA / SAIL / RINL / JSW / JINDAL OR EQUIVALENT STEEL TO BE USED) |
| 18 | PROVIDING AND FABRICATING STRUCTURAL STEEL WORK IN ROLLED SECTIONS LIKE JOISTS, CHANNELS, ANGLES, TEES ETC. AS PER DETAILED DESIGN AND DRAWINGS OR AS DIRECTED INCLUDING CUTTING, FABRICATING, HOISTING, ERECTING, FIXING IN POSITION MAKING RIVETED/BOLTED/WELDED CONNECTIONS WITHOUT CONNECTING PLATES, BRACES ETC. AND INCLUDING ONE COAT OF ANTICORROSIVE PAINT AND OVER IT TWO COATS OF OIL PAINTING OF APPROVED QUALITY AND SHADE ETC. COMPLETE. |
| 19 | ERECTING, HOISTING AND FIXING IN POSITION STRUCTURAL STEEL WORK IN SINGLE OR BUILT-UP SECTIONS AT ALL HEIGHTS AND LEVELS (DISMANTLED, PRE-FABRICATED STEEL STRUCTURE) WITH REQUIRED APPROVED NUT BOLTS ETC. IF WELDING IS REQUIRED SAME SHALL BE GOT APPROVED BEFORE FIXING STRUCTURAL MEMBER IN POSITION. M.S. PIPE SCAFFOLDING AND APPLYING INCLUDING ONE COAT OF ANTICORROSIVE PAINT AND OVER IT TWO COATS OF OIL PAINTING OF APPROVED QUALITY AND SHADE ETC. COMPLETE AFTER FABRICATION INCLUDING TOUCHING UP AFTER ERECTION ETC. COMPLETE AS DIRECTED BY ENGINEER.(STRUCTURAL STEEL MATERIAL AND PAINT WILL BE SUPPLIED BY RCF, PARTY TO SHIFT MATERIAL FROM STORES TO SITE. ALL CONSUMABLE GASES AND OTHER MATERIAL ARE IN SCOPE OF CONTRACTOR) |
| 20 | PROVIDING STRUCTURAL STEEL WORK IN HOLLOW SECTION OF VARIOUS THICKNESS AND SIZES IN SQUARE, RECTANULAR AND ROUND SHAPE FROM 25MM TO 450MM SECTION AS PER IS 4923 YST 310 GRADE PRODUCED FROM IRON ORE AND BLAST FURNACE ROUTE ETC. AS PER DETAILED DESIGNS AND DRAWING OR AS DIRECTED INCLUDING CUTTING, FABRICATING, HOISTING, ERECTING, FIXING IN POSITION, MAKING RIVETED/BOLTED/ WELDED CONNECTIONS AND EPOXY PAINTING COMPLETE. |
| 21 | SUPPYING, FABRICATING AND FIXING IN POSITION M.S. HOLDING DOWN BOLTS ASSEMBLY CONSISTING OF BOLTS, HEADS, NUTS, WASGERS ETC. INCLUDING EMBEDING IN CEMENT CONCRETE / R.C.C. WORKS AS PER APPROVED DRAWINGS COMPLETE IN ALL RESPECTS INCLUDING ONE COAT OF ANTICORROSIVE PAINT OVER A COAT OF APPROVED QUALITY PRIMER. (NOTE: ONLY FOUNDATION BOLTS SHALL BE PAID IN THIS ITEM, EXCLUDING CEMENT CONCRETE / R.C.C. WORKS) |
| 22 | SUPPLYING & FIXING OF 0.5 MM THICK META COLOUR CORRUGATED SHEETS I.E. 0.45MM BASE METAL THICKNESS AND 0.50MM TOTAL COAT THICKNESS OF MINIMUM YIELD STRENGTH OF 550 MPA FOR ROOFING AND CLADDING AND AS PER THE BELOW MENTIONED TECHNICAL SPECIFICATIONS INCLUDING CORNER PIECE, RIDGE, GUTTERS ETC. PPGL- PRE PAINTED GALVALUME STEEL SHEET ZINC COATING : AZ 150 PAINT COATING : SUPER DURABLE POLYESTER(SDP) PAINTING / SILICON MODIFIED POLYESTER (SMP) PAINTING AS DIRECTED BY EICPAINTING THICKNESS (TOP) : 25 MICRON PAINTING THICKNESS (BOTTOM) : 5-7 MICRON |
| 23 | SUPPLYING & FIXING OF 6 MM THICK TOP SIDE COLOUR COATED (RAL 9002 OR AS DIRECTED BY EIC) NON-ASBESTOS CEMENT CORRUGATED SHEETS REINFORCED BY ORGANIC FIBERS AND/OR INORGANIC SYNTHETIC FIBERS CONFORMING TO IS:14871 OF VARYING LENGTHS INCLUDING 8MM DIA. STAINLESS STEEL (SS 304) J OR L HOOK BOLTS WITH 50MM MINIMUM THREADED LENGTH, SS WASHERS, SS NUTS, CORNER PIECES, RIDGES, GUTTERS, CUTTING SHEETS TO SIZE AND SHAPE WHEREVER REQUIRED, NECESSARY M.S. PIPE SCAFFOLDING ETC. COMPLETE AS DIRECTED BY EIC. (LAPS SHALL NOT BE PAID EXTRA, SHEET COLOUR TO BE APPROVED BEFORE USE) |
| 24 | PROVIDING AND CONSTRUCTING SECOND CLASS BURNT BRICK MASONRY IN CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND) INCLUDING STRIKING JOINTS, WATREING ETC. COMPLETE IN SUPERSTRUCTURE OR IN FOUNDATION AND PLINTH. |
| 25 | PROVIDING INTERNAL / EXTERNAL CEMENT PLASTER 12MM THICK IN SINGLE COAT WITH CEMENT PLASTER MIX 1:4 (1 CEMENT : 4 COARSE SAND) WITHOUT NEERU FINISH TO CONCRETE AND BRICK SURFACES IN ALL POSITIONS, INCLUDING NECESSARY MS PIPE SCAFFOLDING, CURING ETC. COMPLETE. |
| 26 | PROVIDING AND FIXING P.V.C. RAIN WATER PIPES (4KG PER SQM PRESSSURE) OF 110MM OUTER DIAMETER INCLUDING PROPER RAINWATER RECEIVING RECESS WITH P.V.C. PLUG, BEND, NECESSARY FITTINGS, SUCH AS, OFFSETS, SHOES, INLUDING FIXING THE PIPE ON WALL USING CLEATS AT 1METER SPACING WITH CLIPS INCLUDING NECESSARY SCAFFOLDING ETC. COMPLETE. |
| 27 | PROVIDING AND FIXING IN POSITION HALF ROUND PVC 160 MM DIA PIPE ISI MARKED INCLUDING NECSSARY FITTINGS AND M.S. PIPE SCAFFOLDING ETC. COMPLETE AS DIRECTED BY EIC. |
| 28 | PROVIDING AND APPLYING ONE COAT OF PRIMER (ASIAN PAINTS PROFESSIONAL PRIMER WT/DULUX INTERIOR SEALER A500/BERGER WHITE PRIMER OR EQUIVALENT) OF APPROVED COLOUR, SHADE AND QUALITY TO OLD/NEW SURFACE TO RECEIVE OBD/PLASTIC EMULSION/FLAT OIL PAINT INCLUDING MS PIPE SCAFFOLDING, PREPARING THE SURFACES, WATERING ETC. COMPLETE. |
| 29 | PROVIDING AND APPLYING 100% ACRYLIC EXTERIOR EMULSION PAINT OF APPROVED MAKE AND SHADE (APEX OF ASIAN PAINT / WEATHER COAT OF BERGER PAINT / EXCEL OF NEROLAC PAINT OR APPROVED EQUIVALENT) IN TWO OR MORE COATS OVER ONE COAT OF COMPATIBLE PRIMER INCLUDING M.S. PIPE SCAFFOLDING, SCRAPPING, CLEANING, WASHING ETC. COMPLETE AS DIRECTED BY EIC. (NOTE: TWO LAYER SCAFFOLDING SHALL BE PROVIDED. WIDTH SHALL BE GOT APPROVED FROM EIC BEFORE EXECUTION). |
| 30 | PROVIDING & APPLYING TWO COATS OF WATERPROOF CEMENT PAINT OF APPROVED MANUFACTURER TO PLASTERED SURFACES OR ANY OTHER AREA INCLUDING MS PIPE SCAFFOLDING IF REQUIRED, CLEANING AND PREPARING THE SURFACE, WATERING FOR TWO DAYS ETC. AS DIRECTED BY EIC |
| 31 | PROVIDING AND APPLYING POLYMER MODIFIED READY MIX CEMENT MORTAR (PMM) FOR PLASTERING OR POLYMER MODIFIED READY MIX CEMENT CONCRETE (PMC) OF ANY THICKNESS TO RCC SURFACES AS DIRECTED AS PER SITE REQUIREMENT OF APPROVED BRAND INCLUDING CURING ETC. AS PER MANUFACTURER'S SPECIFICATIONS OR AS PER INSTRUCTIONS OF ENGINEER IN-CHARGE (THE ITEM SHALL BE PAID ON ACTUAL CONSUMPTION OF READY MIX QUANTITY ONLY).THE RATE SHALL BE INCLUSIVE OF CHIPPING / APPLYING CORROSION INHIBITOR ('EPKO-KP-100' OF KRISHNA CONCHEM OR EQUIVALENT, ON ENTIRE CONCRETE SURFACE TO BE REPAIRED BY USING BRUSH AT 250 ML PER SQ.MT./COAT OR AS PER MANUFACTURER’S SPECIFICATION) AND NECESSARY FORMWORK, MS PIPE SCAFOOLDING IF NECESSARY, CURING THE SURFACE FOR 72 HOURS WITH WET GUNNY BAGS ETC. AS DIRECTED BY EIC ETC. COMPLETE. |
| 32 | PROVIDING AND FIXING ONLY MISC. MATERIALS NOT COVERED IN THE SCHEDULE OF RATES MENTIONED ABOVE INCLUDING, FIXING AS DIRECTED BY EIC, STORAGE, TRANSPORTING, LOADING, UNLOADING AT SITE ETC. COMPLETE AS DIRECTED EIC AS PER REQUITREMENT OF JOB .(PAYMENT SHALL BE MADE ON BASIS OF ACTUAL COST OF MATERIAL PER GST-CASH MEMO/ RECEIPT-GST). 10% EXTRA PAYABLE TO THE CONTRACTOR TO COVER PROFIT AND OVERHEAD. Please Enable Macros to View BoQ information |
